mpxio don't show path access state
Hi all ,I have two solaris 10 x86 boxes and my diskarray is 3510,the boxes link the 3510 with two hba .These boxes is enabled MPxIO,mpathadm list lu can list all luns are assigned to them. But mpathadm show lu luname can't display which path is active now,the output as below:
bash-3.00# mpathadm show lu /dev/rdsk/c0t600C0FF0000000000000FC2415182400d0s2
Logical Unit: /dev/rdsk/c0t600C0FF0000000000000FC2415182400d0s2
mpath-support: libmpscsi_vhci.so
Vendor: SUN
Product: StorEdge 3510
Revision: 415F
Name Type: unknown type
Name: 600c0ff0000000000000fc2415182400
Asymmetric: no
Current Load Balance: round-robin
Logical Unit Group ID: NA
Auto Failback: on
Auto Probing: NA
Paths:
Initiator Port Name: 210100e08b28d157
Target Port Name: 266000c0ffe000fc
Override Path: NA
Path State: OK
Disabled: no
Initiator Port Name: 210000e08b08d157
Target Port Name: 256000c0ffd000fc
Override Path: NA
Path State: OK
Disabled: no
Target Ports:
Name: 266000c0ffe000fc
Relative ID: 0
Name: 256000c0ffd000fc
Relative ID: 0
What's wrong?How can I resolv it?Thanks!
