Probably not.
If I recall correctly, the external FCAL connector that is on the rear
of Sunblade 1000, Sunblade 2000, Sunfire V480, and Sunfire V490 systems
was intended for use with a particular Sun Storedge FCAL Multipak.
I don't think the external port worked with much of anything else.
If you glance inside Appendix B of the SB1000/2000 Service Manual
http://www.sun.com/products-n-solutions/hardware/docs/pdf/816-3217-10.pdf
you'll see that there are no fiber optics there.It's a copper port, driven by a FCAL chipset.
> If you glance inside Appendix B of the SB1000/2000
> Service Manual
> http://www.sun.com/products-n-solutions/hardware/docs/
> pdf/816-3217-10.pdf
> you'll see that there are no fiber optics there.
>It's a copper port, driven by a FCAL chipset.
Actually, the Dell PowerVault 660F uses a copper FC/AL interface.
I have also been looking for a FC/AL array to attach to a Blade 2000.
w.r.t. the Dell Powervaults:
1) The [url=http://cgi.ebay.co.uk/Dell-PowerVault-660F-Fibre-Channel-Array-unit_W0QQit emZ260102259689QQcategoryZ1484QQssPageNameZWDVWQQrdZ1QQcmdZViewItem]660F[/url] has a RAID controller, which has a DB9 connector for the host connector, so need a [url=http://cgi.ebay.co.uk/SCSI-Fibre-Channel-Cable-Copper-HSSDC-DB9-NEW_W0QQit emZ140102874163QQcategoryZ90716QQssPageNameZWDVWQQrdZ1QQcmdZViewItem]
SCSI Fibre Channel Cable (Copper-HSSDC - DB9)[/url] to connect to the Blade 2000.
What I am not sure about if you need a Solaris driver for the RAID controller (like you needed Raid Manager 6 for the Sun StorEDGE A1000)
2) The [url=http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=260102260805& ssPageName=MERC_VI_RSCC_Pr4_PcY_BID_Stores_IT&refitem=260102259689&itemc ount=4&refwidgetloc=active_view_item&usedrule1=StoreCatToStoreCat&re fwidgettype=cross_promot_widget]224F[/url] appears to be a JBOB and requires a [url=http://cgi.ebay.co.uk/Lot-of-2-New-3M-HSSDC-HSSDC-Copper-Fibre-Channel-Cab les_W0QQitemZ110109164562QQcategoryZ64045QQrdZ1QQssPageNameZWD2VQQcmdZViewItem]
HSSDC TO HSSDC CABLE[/url] to connect to the Blade 2000.
I guess the 224F has more chance of working with Solaris without needing a special driver.