about sunpci

why do you say about sunpci

could you please give some info how you accessing from windows2003

using serial console or

ssh or

telnet or

thirdparty software

is you windows Graphic Drivers installed. check that out. make sure the are set to general default

whats the resolution of your window machine?

waiting

javeedabdula at 2007-7-9 5:34:23 >

> the external monitor shows only one resolution:

> 640x480 at 4-bit color ,how to do?

>

> hardware:sunblade 2500

> sofware: solaris 10

>

> sunpci card: v3.2.2 , windows sp2/windows 2003 sp1

> installed.

>

> help me plz.

Read the question your self . does it make sense to you. any how .

can you tellwhat os are you running on it

any way i found the handbook and its components. if the box is under warranty you can ring sun and ask it to be replace or tell them to send specific link to download the drivers.

http://sunsolve.sun.com/handbook_private/Systems/SunBlade2500/components.html

if the top one is not the your model

then check this out and get the right model info

http://sunsolve.sun.com/handbook_private/Systems/eolSystemList.html

check this out for your sunpci card

http://www.sun.com/desktop/products/sunpcipro/

if you are smart in understanding what you type. dont assume, predict every one will understand your short cut.

any way i hope by going to the site it should make sense if please send the comment with good info

to help you out

if not -

javeedabdula at 2007-7-9 5:34:23 >

> I have a Sun Blade 2500 (Silver) Workstation and had

> set a SunPCi IIIpro coprocessor card in the ws.

> Then, the external monitor shows only one resolution:

> 640x480 at 4-bit color. Could you help me?

Again i would like to ask you one more question

What Os are you running with version please

what kind of Desktop are you using (ex-gnome,CDE,open window)

what is the resolution you setup.

do you know how to check the resolution. if you can then could you please see it could be some setting issue.

check the packages. ( this could happen if you loose the x packages.

what application are you running.

is it happening when you start the system.

or when you running an application

the answers will help me to rectify the problem in hardware level or software level or application level

Are you able to get in GUI mode at all.

or is it on CUI mode.

would you mind to change the pci card to different slot and boot with this option

ok boot -r

give me the output.

javeedabdula at 2007-7-9 5:34:23 >