install solaris 10 11/06 on dell poweredge 2950
Dear All ,
I just try install solaris 10 11/06 on dell poweredge 2950 , i get error messages no disk found .
does any want know , where i can download driver PERC 5/i raid card or LSI 8408E for solaris ?.
I am also check on website
http://www.lsilogic.com/storage_home/products_home/internal_raid/megaraid_sas/m egaraid_sas_8408e/index.html?remote=1&locale=
but only see driver for windows, linux ,dos ,and netware .
Regards
Hadi
[483 byte] By [
hadi74a] at [2007-11-26 16:12:27]
# 4
1950's and 2950's work well in Solairs 10.
You'll need Solairs U3 at least as it has an updated mpt driver for the newer LSI 1680. The networking however is not included. There are two ways to install then:
1. Install without network, download driver and add from cd after system is up and running.
2. Install using a ITU cd image.
Alternately if you have a Jumpstart server, use Solaris U3 and rebuild the x86.miniroot with the Broadcom driver built in ;)
http://www.broadcom.com/support/ethernet_nic/netxtremeii.php
http://www.lsilogic.com/storage_home/products_home/standard_product_ics/sas_ics /lsisas1068/index.html?remote=1&locale=
