Sunfire 480R + boot command does not boot from disk
Hi All,
I'm trying to work out why when I type ok>boot
the server keeps booting off the network. It's almost as it does not find any disks and then since diag-device is set to net it tries that instead. The same happens even if I do an init 6 or reboot from solaris?
the output from eeprom looks like:
# eeprom
test-args: data not available.
diag-passes=1
local-mac-address?=false
silent-mode?=false
scsi-initiator-id=7
oem-logo: data not available.
oem-logo?=false
oem-banner: data not available.
oem-banner?=false
ansi-terminal?=true
screen-#columns=80
screen-#rows=34
ttya-rts-dtr-off=false
ttya-ignore-cd=true
ttya-mode=9600,8,n,1,-
output-device=ttya
input-device=ttya
auto-boot-on-error?=false
load-base=16384
auto-boot?=true
boot-command=boot disk
diag-file: data not available.
diag-device=net
boot-file: data not available.
boot-device=/pci@9,600000/SUNW,qlc@2/fp@0,0/disk@w500000e010f124c1,0:a rootmirro
r disk net
use-nvramrc?=true
nvramrc=devalias rootmirror /pci@9,600000/SUNW,qlc@2/fp@0,0/disk@w500000e010f232
61,0:a
security-mode=none
security-password: data not available.
security-#badlogins=0
fcode-debug?=false
diag-out-console=false
post-trigger=error-reset power-on-reset
diag-script=normal
diag-level=min
diag-switch?=false
obdiag-trigger=error-reset power-on-reset
error-reset-recovery=boot
