SAN disks don't show up?
Hi,
I have the following configuration :sunfire v480 with 2 hba qlogic 2340 (multipath with DMP).
Initialy 3 LUNs were affected to this server and I could see 6 entries in the "format" command. I attached 3 more LUNs on the server (target 3, 4 and 5) but they are seen on a single controler (8). I tried to reconfigure the server (boot -r) but nothing change. I can see the devices of the LUNs in /devices/... but the links are not created in /dev/dsk or /dev/rdsk ( I also tried devfsadm -C -c disk)
Any idea?
Thanks
uxhcm916{root}:/tmp> format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c1t0d0 <SUN72G cyl 14087 alt 2 hd 24 sec4> /pci@9,600000/SUNW,qlc@2/fp@0,0/ssd@w21000014c3113f16,0
1. c1t1d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@9,600000/SUNW,qlc@2/fp@0,0/ssd@w21000014c3113f15,0
2. c8t0d0 <STK-OPENstorageD240-0612 cyl 25598 alt 2 hd 64 sec 64> /pci@8,600000/fibre-channel@1/sd@0,0
3. c8t0d1 <STK-OPENstorageD240-0612 cyl 25598 alt 2 hd 64 sec 64> /pci@8,600000/fibre-channel@1/sd@0,1
4. c8t0d2 <STK-OPENstorageD240-0612 cyl 25598 alt 2 hd 64 sec 64>/pci@8,600000/fibre-channel@1/sd@0,2
5. c8t0d3 <STK-OPENstorageD240-0612 cyl 25598 alt 2 hd 64 sec 64> /pci@8,600000/fibre-channel@1/sd@0,3
6. c8t0d4 <STK-OPENstorageD240-0612 cyl 25598 alt 2 hd 64 sec 64>/pci@8,600000/fibre-channel@1/sd@0,4
7. c8t0d5 <STK-OPENstorageD240-0612 cyl 25598 alt 2 hd 64 sec 64> /pci@8,600000/fibre-channel@1/sd@0,5
8. c11t1d0 <STK-OPENstorageD240-0612 cyl 25598 alt 2 hd 64 sec 64> /pci@8,600000/fibre-channel@2/sd@1,0
9. c11t1d1 <STK-OPENstorageD240-0612 cyl 25598 alt 2 hd 64 sec 64> /pci@8,600000/fibre-channel@2/sd@1,1
10. c11t1d2 <STK-OPENstorageD240-0612 cyl 25598 alt 2 hd 64 sec 64> /pci@8,600000/fibre-channel@2/sd@1,2
