Sun Cluster 3.x connecting to SE3510 via Network Fibre Switch
Sun Cluster 3.x connecting to SE3510 via Network Fibre Switch
Hi,
Currently the customer have 3 nodes clusters that are connected to the SE3510 via to the Sun StorEdge[TM] Network Fibre Channel Switch(SAN_Box Manager) and running SUN Cluster 3.X with Disk-Set.The customer want to decommised the system but want to access the 3510 data on the NEW system.
Initially, I remove one of the HBA card from one the cluster nodes and insert it into the NEW System and is able to detect the 2 LUNS from the SE3150 but not able to mount the file system.After some checking, I decided follow the steps from SunSolve Info ID:85842 as show below:
1.Turn off all resources groups
2.Turn off all device groups
3.Disable all configured resources
4.remove all resources
5.remove all resources groups
6.metaset 杝 < setname> -C purge
7.boot to non cluster node, boot 杝x
8.Remove all the reservations from the shared disks
9.Shutdown all the system
Now, I am not able to see the two luns from the NEW system from the format command.cfgadm 朼l shows as below:
Ap_Id Type ReceptacleOccupantCondition
C4fc-fabricconnectedconfigured
Unknown
1.Is it possible to get back the data and mount back accordingly?
2.Any configuration need to done on the SE3150 or the SAN_Manager?
