Networking & Display Problem Solaris 10:Urgent
Hello,
Recently I am facing two Problem with Solaris 10 6/06 or 1/06. It was installed fine before 1 month no display problem etc.. in my sun ultra 20. Now When I am going to install it the display was not ok. I could not change resolution also from JDS. No option is showing. & when I installing driver cds, then its shows" Out Of Frequency", But I donot know why it is happening? I have same configartion everything was same before then there was no problem then.
& 2nd one is,
I have two NIC in my system. 1 is default onboard, & other is Frotech I was attached it. Now When I am going to configure my Broadband with NIC, & connecting router with cable & rebooting system. It shows " Failed To configure IPv4" then In Network monitor it also show Disconnetectd.
N.B: I was trying to solve this with many time freash Installation. But No solution.
Here is My Solaris Network Configuration
Network Interfence: nge0 & rtls
Primary Network Interfence: nge0
Primary Network Confiration :
DHCP : No
Hostname : Localhost
Ip address: 192.168.1.10
Ipv6 = NO
Default Route = 192.168.1.1
Subnet Mask :255.255.255.0
Secondary Network Configuration
DHCP : No
Hostname :SERVER
Ip address: 192.168.1.5
Ipv6 = NO
Default Route = "Detect Upon reboot"
Subnet Mask :255.255.255.0
Name server : None
N.B: in the time off instaltion i choose both nge0 & rtls in the option " Network interfence".
Please help me for that.....
Thanks in advance
