Configuring StorEdge 3320

Hi All,

I have configured StorEdge 3320 with three logical drives:

- 8 disks in Raid 5 (7 Active and 1 Spare;each drive is 72 GB)

- 2 disks in Raid 1 (each drive is 72 GB)

- 2 disks in Rain 1 (each drive is 72 GB)

Created one partition of each logical drive (total 3 partitions)

I have updated the LUN's in the sd.conf file. When I do a format command, I see two partitions. Is that right? I thought that the drive will show up with 3 partitions. The two Raid 1's show up as one 135GB patition instead of 2 ~65GB partitions. Here is the output of the format command:

partition> p

Current partition table (original):

Total disk cylinders available: 52516 + 2 (reserved cylinders)

PartTagFlagCylinders SizeBlocks

0rootwm0 -16135.47MB(17/0/0)277440

1swapwu17 -33135.47MB(17/0/0)277440

2backupwu0 - 52515408.68GB(52516/0/0) 857061120

3 unassignedwm00 (0/0/0) 0

4 unassignedwm00 (0/0/0) 0

5 unassignedwm00 (0/0/0) 0

6usrwm34 - 52515408.41GB(52482/0/0) 856506240

7 unassignedwm00 (0/0/0) 0

Please let me know if this is right.

Regards

[1168 byte] By [network_er] at [2007-11-26 9:46:06]