E4500 cannot power on
All,
I got E4500 which I was able to power on once. At that time in the middle of the POST the system turned off by itself. Last few lines of post are here:
0,0>Board 0 SIMMs Test
0,0>MP Memory SIMM Clear Test
0,0>Memory Size is 10240Mbytes
0,0>CPU MID 1 clearing 00000000.00004000 to 00000000.40000000
0,0>CPU MID 4 clearing 00000000.40000000 to 00000000.80000000
0,0>CPU MID 5 clearing 00000000.80000000 to 00000000.c0000000
0,0>CPU MID 8 clearing 00000000.c0000000 to 00000001.00000000
0,0>CPU MID 9 clearing 00000001.00000000 to 00000001.40000000
0,0>CPU MID 12 clearing 00000001.40000000 to 00000001.80000000
0,0>CPU MID 13 clearing 00000001.80000000 to 00000001.c0000000
0,0>CPU MID 14 clearing 00000001.c0000000 to 00000002.00000000
0,0>CPU MID 15 clearing 00000002.00000000 to 00000002.40000000
0,0>CPU MID 0 clearing 00000002.40000000 to 00000002.80000000
0,0>CPU MID 0 clearing 00000000.00000000 to 00000000.00004000
0,0>Memory Walking Rows and Columns Test
0,0>MP Memory SIMM (6N RAM Patterns) Test
0,0>Memory Size is 10240Mbytes
0,0>CPU MID 1 testing 00000000.00000000 to 00000000.40000000
0,0>CPU MID 4 testing 00000000.40000000 to 00000000.80000000
0,0>CPU MID 5 testing 00000000.80000000 to 00000000.c0000000
0,0>CPU MID 8 testing 00000000.c0000000 to 00000001.00000000
0,0>CPU MID 9 testing 00000001.00000000 to 00000001.40000000
0,0>CPU MID 12 testing 00000001.40000000 to 00000001.80000000
0,0>CPU MID 13 testing 00000001.80000000 to 00000001.c0000000
0,0>CPU MID 14 testing 00000001.c0000000 to 00000002.00000000
0,0>CPU MID 15 testing 00000002.00000000 to 00000002.40000000
0,0>CPU MID 0 testing 00000002.40000000 to 00000002.80000000
There are couple of hundred lines before this and everything was OK till this point.
I have replaced board 0 with another board, since POST kind of failed on Board 0 SIMMs Test. I pluged in the power to the system (it's rated for 100v-240v), the key is in the stand by mode, I turned on the switch at the back to position 1 and then I hear clicking of relayes in power supplies (I guess) but none of the lights on any of the 4 power supplies, clock board or the board 0 (only CPU board in the system at this time) would come on. Not a single LED comes on. Then I put key in | position and still nothing happens. Needles to say I am not getting anything on the console window.
Since POST failed first time I have rest CPU and system on clock board but that didn't help.
I would appreciate any help I can get.
Regards.
