HBA card
I want to connect Sun fire 4800 server with EMC clarion cx400 SAN. For this I want to configure HBA card. The output of prtdiag is
========================= IO Cards =========================
Bus Max
IOPort BusFreq Bus Dev,
FRU NameType ID Side Slot MHz Freq Func State NameModel
- - - - - - - - -- -- -
/N0/IB6/P0 PCI24B03333 1,0 okpci-pci8086,b152.0/pci108e,1000pci-bridge
/N0/IB6/P0 PCI24B03333 0,0 okpci108e,1000-pci108e,1000.1
/N0/IB6/P0 PCI24B03333 0,1 okSUNW,hme-pci108e,1001 SUNW,cheerio
/N0/IB6/P0 PCI24B03333 4,0 okSUNW,isptwo-pci1077,1020/sd (blo+ QLGC,ISP1040B
/N0/IB6/P0 PCI24A36666 1,0 oknetwork-pci108e,2bad SUNW,pci-gem
/N0/IB6/P1 PCI25B43333 1,0 oknetwork-pci108e,2bad SUNW,pci-gem
/N0/IB6/P1 PCI25B53333 2,0 okscsi-glm/disk (block) Symbios,53C875
/N0/IB6/P1 PCI25B53333 2,1 okscsi-glm/disk (block) Symbios,53C875
/N0/IB6/P1 PCI25B63333 3,0 okJNI,FCR/sd (block)FCX2-6562
/N0/IB6/P1 PCI25B63333 3,1 okJNI,FCR/sd (block)FCX2-6562
/N0/IB6/P1 PCI25A76666 1,0 oknetwork-pci108e,2bad SUNW,pci-gem
/N0/IB8/P0 PCI28B03333 1,0 okpci-pci8086,b152.0/pci108e,1000pci-bridge
/N0/IB8/P0 PCI28B03333 0,0 okpci108e,1000-pci108e,1000.1
/N0/IB8/P0 PCI28B03333 0,1 okSUNW,hme-pci108e,1001 SUNW,cheerio
/N0/IB8/P0 PCI28B03333 4,0 okSUNW,isptwo-pci1077,1020/sd (blo+ QLGC,ISP1040B/N0/IB8/P0 PCI28A36666 1,0 oknetwork-pci108e,2bad SUNW,pci-gem
/N0/IB8/P1 PCI29A76666 1,0 oknetwork-pci108e,2bad SUNW,pci-gem
Vendor says that JNI card availabe on MY server is not compatible with SAN. I am not able to locate the qlogic cards as mentioned in the output of prtdiag. Pls suggest how to proceed.
I am novice for SAN.
Regards
Amit
