LSImegaraid, storedge C2, no tape device created

Hi,

we have an Ultra20 sol10 01/06 with a storedge C2 tape library connected to a LSI Megaraid SCSI 320-2E.

The card itself is seeing the tape device(scsi id 5)

and Solaris has loaded the driver for the card.

bash-3.00# prtconf -D | grep lsi

pci1000,2, instance #0 (driver name: lsimega)

But solaris isn't seeing the tape device.

cfgadm is seeing the controller:

bash-3.00# cfgadm -al

Ap_Id Type ReceptacleOccupantCondition

c2scsi-busconnectedunconfigured unknown

usb0/1 usb-kbdconnectedconfiguredok

c2 is pointing to my LSI controller but unconfigured.

When I trie to do a cfgadm -c configure c2 the system will kernel panic and reboot.

Do we have to get this c2 in a configured state before getting the tape device to work.

[817 byte] By [grinwisun] at [2007-11-26 8:04:40]

# 1

Tried an Adaptec card (29160) and that's working fine.

bash-3.00# modinfo | grep -i adap

140 fffffffff3e6d000 27508 581 cadp160 (Adaptec Ultra160 HBA 1.21)

bash-3.00# cfgadm -al | grep c3

c3scsi-busconnectedconfiguredunknown

c3::rmt/0 tape connectedconfiguredunknown

c3::scsi/changer/c3t5d1med-changer connectedconfigured

Looks like this LSImegaraid 320-2E is bit to hot to handle.

grinwisun at 2007-7-6 20:40:11 >

Solaris Operating System New Topic