Netra Alarm Card

I have a Netra 1125.Running Solaris 10.

I was advised that the CPU board is the same as the Ultra 60.With that in mind, I purchased an audio card compatible with the Ultra 60, P/N 501-4155-03.

The audio card will only fit in one spot.Unfortunately something called an alarm card P/N 270-4669-04 already installed in that spot.If I remove the alarm card, the computer will not even turn on.Is there a jumper setting or other procedure that will allow me to remove the alarm card and put in the audio card?

Thanks.

Gary

[655 byte] By [GaryFuqua] at [2007-11-25 22:38:37]

«« Driver for M9914 for long block caoability
»» New Ultra 20, No Display

# 1

What position are J3505 and J3506 jumpers at?

mlennon at 2007-7-5 14:09:21 >

top of Java-index,Sun Hardware,Other Sun Hardware...

# 2

On both, going from left to right pins 1&2 are jumpered together.Pin 3 is open.

GaryFuqua at 2007-7-5 14:09:21 >

# 3

In order to see the jumpers, I had to remove the processor, video card, etc.When I put everything back in, the computer booted.When I plugged in the power cord

The jumpers are still in the default position.

The problem now is the power switch seems disabled.

GaryFuqua at 2007-7-5 14:09:21 >

# 4

The Netra is powering up with the audio card in place.The power switch seems disabled. I get an error /dev/audioctlcould not open stream to audio device.Is there a package I should add in Solaris 10?

GaryFuqua at 2007-7-5 14:09:21 >

# 5

OK, we are back to square 1.The netra will not boot with the audio card in place, and jumper J3505 and J3506 in the default setting. Any ideas?

GaryFuqua at 2007-7-5 14:09:21 >

Other Sun Hardware

Java programming resources: FAQs, tutorials, compiler and browser download sites, documentation, books lists, IDEs, etc.

Netra Alarm Card

Sun Hardware New Topic

Sun Hardware Hot Topic

Sun Hardware

All Classified