Help about JNIHBA and StorEdge 6120
Dear guys,
After I inistalled the JNI 2 Gb PCI FC HBA in V880, and I have installed the StorEdge 6120, but, according to the installation guide, after I executed
ok apply show-children ******
I got nothing but
PortID LUN port WWN Device TYPE LUN description
I cannot see any information about the array.
The lights in the arrays seem very normal.
Where do I need to start to check? And check what?
Thanks a lot!
Best Regards
[495 byte] By [
freelong] at [2007-11-25 23:15:47]
# 1
Hi, who can give me some suggestion? Where can I check the problem from? Thanks a lot!
# 2
Are any luns mapped to the host? Are they masked correctly?
# 3
Hi,
I am not sure what you mean "LUN maps to the host", can you explain it clearly? I am almost a new for Solaris. Here is the sd.conf.
Thanks a lot!
bash-2.05# less sd.conf
#
# Copyright (c) 1992, by Sun Microsystems, Inc.
#
#ident "@(#)sd.conf1.998/01/11 SMI"
name="sd" class="scsi" class_prop="atapi"
target=0 lun=0;
name="sd" class="scsi" class_prop="atapi"
target=1 lun=0;
name="sd" class="scsi" class_prop="atapi"
target=2 lun=0;
name="sd" class="scsi" class_prop="atapi"
target=3 lun=0;
name="sd" class="scsi"
target=4 lun=0;
name="sd" class="scsi"
target=5 lun=0;
name="sd" class="scsi"
target=6 lun=0;
name="sd" class="scsi"
target=8 lun=0;
name="sd" class="scsi"
target=9 lun=0;
name="sd" class="scsi"
target=10 lun=0;
name="sd" class="scsi"
target=11 lun=0;
name="sd" class="scsi"
target=12 lun=0;
name="sd" class="scsi"
target=13 lun=0;
# 4
Does the 6120 have luns created on it and are they accessible via lun masking to the host?
# 5
No.
Because after I enter the ok prompt, and then I use the command: show-devs, I can see the JNI HBA,
>ok show-devs
.......
/pci@9,600000/SUNW,jfca@1,1
/pci@9,600000/SUNW,jfca@1
........
but, then I use the ok> apply show-children /.......
I only can get:
>ok apply show-children /pci@9,600000/SUNW,jfca@1
PortIDLUN Port WWN -Device Type- -LUN Desc...
Only the head, no content for it.
thanks a lot.
# 6
You need to have luns created and accessible to the system.
# 7
How to create LUN for StorEdge 6120? I cannot find the suitable documentation to create LUNs on StorEdge 6120.
BTW, I cannot see any information from format coomand:
bash-2.05# format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c1t0d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w500000e0107d5161,0
1. c1t1d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w500000e0107d7901,0
2. c1t2d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w500000e0107d8ad1,0
3. c1t3d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w500000e0107c8cf1,0
4. c1t4d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w500000e0107c8e91,0
5. c1t5d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w500000e0107c21a1,0
Specify disk (enter its number):
Thanks a lot!
# 8
http://www.sun.com/products-n-solutions/hardware/docs/Network_Storage_Solutions/ Midrange/6120/index.html
# 9
Hi,
I have create the volumes, and slices in the array. Here is the information about that.
base2:/:<3>vol list
volumecapacity raid datastandby
v1 409.022 GB5 u1d01-07u1d14
v2 340.851 GB5 u1d08-13u1d14
base2:/:<4>volslice list
Slice Slice NumStart BlkSize BlksCapacityVolume
s10 0 209723904100.003 GBv1
s21 209723904209723904100.003 GBv1
s32 419447808209723904100.003 GBv1
s43 629171712222310656106.005 GBv1
- - 8514823686299904 3.003 GBv1
s54 0 209715200100.000 GBv2
s65 209715200209715200100.000 GBv2
s76 41943040014680064070.000 GBv2
s87 56623104014680064070.000 GBv2
- - 7130316801786880872.500 MBv2
base2:/:<5>
base2:/:<5>lun perm list
lunsliceWWN Group NameGroup PermWWN PermEffective Perm
- -
00default-- -- rw rw
11default-- -- rw rw
22default-- -- rw rw
33default-- -- rw rw
44default-- -- rw rw
55default-- -- rw rw
66default-- -- rw rw
77default-- -- rw rw
- -
base2:/:<6>
After this, following the document, I should use the format command to display the paths to each LUN/slice on the host, but, I still cannot see anything about the array information on host.
bash-2.05# format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c1t0d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w500000e0107d5161,0
1. c1t1d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w500000e0107d7901,0
2. c1t2d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w500000e0107d8ad1,0
3. c1t3d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w500000e0107c8cf1,0
4. c1t4d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w500000e0107c8e91,0
5. c1t5d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w500000e0107c21a1,0
Specify disk (enter its number):
Thanks a lot! what should I do? and where did I do it wrong? and where should I check?
Regards,
Longfei
