I am rebuilding an old E450 as a DR standby, and I am having trouble getting the server to see an A5200.
Server is running solaris 9
patch rev Generic_117171-07
OBP 3.22.0 2000/12/20 16:31
POST 6.1.0 2000/12/20 16:32
the server has 12 disks in it.
I have the fcal's in slot 5 & 6
did a boot -r
luxadm insertfinds nothing.
do I need to add a package for this?
I thought Solaris 9 had all this bundled in.
thanks
Tim Adams
older large plug stuff..
works on, these are fiber channel cards made by qlogic isp2200A on the chip
these are the same cards on a V1280 that works right.
pci33 PCI0 SUNW,qlc-pci1077,2200 (scsi-+
okay /ssm@0,0/pci@18,700000/SUNW,qlc@1
pci33 PCI1 SUNW,qlc-pci1077,2200 (scsi-+
okay /ssm@0,0/pci@18,700000/SUNW,qlc@2
Make sure the system has the latest patches for luxadm and friends. Also, try running "devfsadm -C" on the system that can't see the devices.
Note: This will clean up any links for devices that may no longer be attached to the system. If you have, for example, tape devices that aren't powered on they'll get nuked.
(Yes, "nuked" is a technical term.)
:/var/adm # cfgadm -al
Ap_Id Type ReceptacleOccupantCondition
c0scsi-busconnectedconfiguredunknown
c0::dsk/c0t0d0disk connectedconfiguredunknown
c0::dsk/c0t1d0disk connectedconfiguredunknown
c0::dsk/c0t2d0disk connectedconfiguredunknown
c0::dsk/c0t3d0disk connectedconfiguredunknown
c1scsi-busconnectedconfiguredunknown
c1::dsk/c1t6d0CD-ROMconnectedconfiguredunknown
c2scsi-busconnectedconfiguredunknown
c2::dsk/c2t0d0disk connectedconfiguredunknown
c2::dsk/c2t1d0disk connectedconfiguredunknown
c2::dsk/c2t2d0disk connectedconfiguredunknown
c2::dsk/c2t3d0disk connectedconfiguredunknown
c3scsi-busconnectedconfiguredunknown
c3::dsk/c3t0d0disk connectedconfiguredunknown
c3::dsk/c3t1d0disk connectedconfiguredunknown
c3::dsk/c3t2d0disk connectedconfiguredunknown
c3::dsk/c3t3d0disk connectedconfiguredunknown
norsun01:/var/adm # cfgam
ksh: cfgam: not found
norsun01:/var/adm # cfgadm
Ap_Id Type ReceptacleOccupantCondition
c0scsi-busconnectedconfiguredunknown
c1scsi-busconnectedconfiguredunknown
c2scsi-busconnectedconfiguredunknown
c3scsi-busconnectedconfiguredunknown
cfgadm does not show the cards are even in the machine. I looked at the back of the A5200 and I have one green light and one amber on the Gbic I am thinking that the cards are not hot.
I am going to try a new slot and bounce the fiber array
Thanks
Tim
ok I have moved the cards to new slots,
norsun01:/ # pkginfo |grep -i lux
systemSUNWluxdxSun Enterprise Network Array sf Device Driver (64-bit)
systemSUNWluxlxSun Enterprise Network Array socal Device Driver (64-bit)
systemSUNWluxopSun Enterprise Network Array firmware and utilities
systemSUNWluxoxSun Enterprise Network Array libraries (64-bit)
systemSUNWvoluxVolume Management (Usr) (64-bit)
the driver packages exsist on the machine
do I need to add the cards with cfgadm?
the Gbic's still has one green and one amber light.
Do I need to load the san pack or something?
norsun01:/ # showrev
Hostname: norsun01
Hostid: XXXXXXXX
Release: 5.9
Kernel architecture: sun4u
Application architecture: sparc
Hardware provider: Sun_Microsystems
Domain: XXXXXXXXXX
Kernel version: SunOS 5.9 Generic 117171-07 Jun 2004
Root Cause
firmwareup
patch revup
pakages are on there
could this be an a5200 firmware issue?
norsun01:/ # luxadm insert
Please hit <RETURN> when you have finished adding Fibre Channel Enclosure(s)/Device(s):
Waiting for Loop Initialization to complete...
No new device(s) were added!!
No new enclosure(s) were added!!
norsun01:/ # luxadm probe
No Network Array enclosures found in /dev/es
norsun01:/ #
how many pci slots come hot on a e450?
I am quickly running out of ideas on this guy.
thanks
Tim
