storedge 3310 and format

hi,

i have the following problem:

a storedge 3310 with raid controller. i have partitioned the volume ( which consists of 6 raid 1 logical drives) into 4 partions and assigned luns to these partitions.

probe-scsi-all shows the following:

/pci@1e,600000/pci@2/scsi@4

Target 0

Unit 0 Disk SUN StorEdge 3310 0325

Unit 1 Disk SUN StorEdge 3310 0325

Unit 2 Disk SUN StorEdge 3310 0325

Unit 3 Disk SUN StorEdge 3310 0325

format shows only the first one:

0. c0t0d0

/pci@1c,600000/scsi@2/sd@0,0

1. c0t1d0

/pci@1c,600000/scsi@2/sd@1,0

2. c2t0d0

/pci@1e,600000/pci@2/scsi@4/sd@0,0

where are the other three partitions?

[724 byte] By [oheydorn] at [2007-11-25 23:14:31]

«« FC Based Backup solution - L25/L100
»» Bad Block Encountered

# 1

You need to modify the /kernel/drv/sd.conf

deacon at 2007-7-5 18:03:49 >

top of Java-index,Storage Forums,Storage General Discussion...

# 2

Hi there,

I have a similar situation where I set up a SE 3310 connected to a Sunfire V210 running Solaris 10 GA.

The SE 3310 was set up as 2 RAID 5 logical volumes, each

with 5x72GB disk drives. I also map the hosts LUNS etc...

At the V210, when I did the probe-scsi-all it sees both RAID5

logical disks as StorEdge 3310 0325 (firmware 3.25)

however when I boot up with the -rv option, it only sees one

RAID5. Where is the other RAID 5 logical drive?

I did update_drv -f sd, devfsadm; manually edit the sd.conf

to add additional controllers and LUN's (c0,c1,c2 and up to

32 LUN's for each controller, but I still do not see the other

RAID5 logical drive. Where is it?

Please help !!!

Tony

tonytran1 at 2007-7-5 18:03:49 >

# 3

http://forum.sun.com/thread.jspa?threadID=23700&tstart=0

jdstoon at 2007-7-5 18:03:49 >

Storage General Discussion

Java programming resources: FAQs, tutorials, compiler and browser download sites, documentation, books lists, IDEs, etc.

storedge 3310 and format

Storage Forums New Topic

Storage Forums Hot Topic

Storage Forums

All Classified