Storedge 3310 & Dual Ultra3 Adaptor

Hi all,

A couple of things...

1. We have 2 storedge 3310 and two machines with Ultra3 Adaptors. I can not see the 3310 using the Ultra3 adaptors. If I plug the 3310 into the host controller I can see it, (but that is not ideal as it is running slow). at the 'ok' prompt I can see the 3310, but I can never get anything to display in 'format' or on the ssconsole.

commands tried:

reboot -- -r

update_drv -f sd

devfsadm -v

All with no luck. Any ideas?

2. With the 3310 I have configure one logical RAID 5 drive (5 disks) and partitioned into 4 and mapped each partition to a host lun.

I have mucked with /kernel/drv/sd.conf and put "set scsi_options=0x43ff8" into /etc/system, I can never see the anything but the first partion on the first lun.

Help please :-)

[839 byte] By [gergnz] at [2007-11-25 23:12:50]