Scsi Errors V880 --> L180
Hi,
I have a V880 server with 2 separate diff cards., and a L180 with 2 tape drives. I have tried various ways to connect them up to get the tape drives / robot recognised. I have installed Veritas Netbackup and am using the scsi passthru driver. The only way that seems to recognise everything gives me the following messages on boot:
Apr 23 11:06:14 bhxsvr005 scsi: WARNING: /pci@9,700000/scsi@4 (glm3):
Apr 23 11:06:14 bhxsvr005SCSI bus DATA IN phase parity error
Apr 23 11:06:14 bhxsvr005 scsi: WARNING: /pci@9,700000/scsi@4 (glm3):
Apr 23 11:06:14 bhxsvr005SCSI bus DATA IN phase parity error
Apr 23 11:06:14 bhxsvr005 scsi: WARNING: /pci@9,700000/scsi@4 (glm3):
Apr 23 11:06:14 bhxsvr005Target 0 reducing sync. transfer rate
Apr 23 11:06:14 bhxsvr005 scsi: WARNING: /pci@9,700000/scsi@4 (glm3):
Apr 23 11:06:14 bhxsvr005SCSI bus DATA IN phase parity error
Apr 23 11:06:14 bhxsvr005 scsi: WARNING: /pci@9,700000/scsi@4 (glm3):
Apr 23 11:06:14 bhxsvr005SCSI bus DATA IN phase parity error
Apr 23 11:06:14 bhxsvr005 scsi: WARNING: /pci@9,700000/scsi@4 (glm3):
Apr 23 11:06:14 bhxsvr005Target 0 disabled wide SCSI mode
Apr 23 11:06:14 bhxsvr005 scsi: WARNING: /pci@9,700000/scsi@4 (glm3):
Apr 23 11:06:14 bhxsvr005Target 0 reverting to async. mode
Apr 23 11:06:15 bhxsvr005 scsi: WARNING: /pci@8,700000/scsi@3 (glm1):
Apr 23 11:06:15 bhxsvr005SCSI bus DATA IN phase parity error
Apr 23 11:06:15 bhxsvr005 scsi: WARNING: /pci@8,700000/scsi@3 (glm1):
Apr 23 11:06:15 bhxsvr005SCSI bus DATA IN phase parity error
Apr 23 11:06:15 bhxsvr005 scsi: WARNING: /pci@8,700000/scsi@3 (glm1):
Apr 23 11:06:15 bhxsvr005Target 1 reducing sync. transfer rate
Apr 23 11:06:15 bhxsvr005 scsi: WARNING: /pci@8,700000/scsi@3 (glm1):
Apr 23 11:06:15 bhxsvr005SCSI bus DATA IN phase parity error
Apr 23 11:06:15 bhxsvr005 scsi: WARNING: /pci@8,700000/scsi@3 (glm1):
Apr 23 11:06:15 bhxsvr005SCSI bus DATA IN phase parity error
Apr 23 11:06:15 bhxsvr005 scsi: WARNING: /pci@8,700000/scsi@3 (glm1):
Apr 23 11:06:15 bhxsvr005Target 1 disabled wide SCSI mode
Apr 23 11:06:15 bhxsvr005 scsi: WARNING: /pci@8,700000/scsi@3 (glm1):
Apr 23 11:06:15 bhxsvr005Target 1 reverting to async. mode
I have one cable from server to one tape drive, which is then terminated.
The second cable from the server goes to the robot controller, then daisy-chained to the other tape drive which is then terminated.
Thanks in advance.
Chris.
