Conecting a V880 to a EVA8000 san

Hello all,

I'm trying to connect a V880 running solaris8 to our new EVA8000 san using HBA qlogic cards, currently the v880 is connectted to our old HSG80 san trought two JNI cards these are the steps I've done so far:-

1) Install HBA into server

2) Ran probe-scsi from ok prompt to see if t can see the cards (output):-

ok probe-scsi-all

/<a href="mailto:pci@8" target="_blank">pci@8</a>,600000/SUNW,<a href="mailto:qlc@4" target="_blank">qlc@4</a>

LiD HA LUNPort WWN-- Disk description --

000 21000004cf780993 SEAGATE ST336605FSUN36G 0438

110 21000004cf22f083 SEAGATE ST336605FSUN36G 0438

/<a href="mailto:pci@8" target="_blank">pci@8</a>,700000/SUNW,<a href="mailto:qlc@3" target="_blank">qlc@3</a>

************************* Fabric Attached Devices ************************

Adapter portId - 330400

Device PortId 330100DeviceId 0WWPN 50001fe150061f0d

Lun0HPHSV210 5030

Lun1DISK HPHSV210 5030

Device PortId 330101DeviceId 1WWPN 50001fe150061f0f

Lun0HPHSV210 5030

Lun1DISK HPHSV210 5030

Device PortId 330102DeviceId 2WWPN 50001fe150061f09

Lun0HPHSV210 5030

Lun1DISK HPHSV210 5030

Device PortId 330103DeviceId 3WWPN 50001fe150061f0b

Lun0HPHSV210 5030

Lun1DISK HPHSV210 5030

/<a href="mailto:pci@8" target="_blank">pci@8</a>,700000/<a href="mailto:scsi@6" target="_blank">scsi@6</a>,1

/<a href="mailto:pci@8" target="_blank">pci@8</a>,700000/<a href="mailto:scsi@6" target="_blank">scsi@6</a>

Target 6

Unit 0Removable Read Only deviceTOSHIBA DVD-ROM SD-M14011009

3) touch /reconfigure

4) installed SFS 4.4.8.Install San_4.4.8_install_it

4.5) Edit /kernel/drv/scsi_vhci.conf

5) shutdown the server

6) booted servers with boot -- -r

7) cfgadm -al (output)

cfgadm -al

Ap_Id Type ReceptacleOccupantCondition

SBacpu/memconnectedconfiguredok

SBa::cpu0 cpu connectedconfiguredok

SBa::cpu1 cpu connectedconfiguredok

SBa::memorymemoryconnectedconfiguredok

SBbcpu/memconnectedconfiguredok

SBb::cpu0 cpu connectedconfiguredok

SBb::cpu1 cpu connectedconfiguredok

SBb::memorymemoryconnectedconfiguredok

SBcnone emptyunconfigured ok

SBdnone emptyunconfigured ok

c0scsi-busconnectedconfiguredunknown

c0::dsk/c0t6d0CD-ROMconnectedconfiguredunknown

c1fc-privateconnectedconfiguredunknown

c1::22000004cf72bebedisk connectedconfiguredunknown

c1::22000004cf72c79bdisk connectedconfiguredunknown

c1::22000004cf72dd18disk connectedconfiguredunknown

c1::22000004cf72ddb3disk connectedconfiguredunknown

c1::22000004cf72e0fcdisk connectedconfiguredunknown

c1::22000004cf72e368disk connectedconfiguredunknown

c1::508002000017483aESI connectedconfiguredunknown

c2fc-privateconnectedconfiguredunknown

c2::21000004cf72bebedisk connectedconfiguredunknown

c2::21000004cf72c79bdisk connectedconfiguredunknown

c2::21000004cf72dd18disk connectedconfiguredunknown

c2::21000004cf72ddb3disk connectedconfiguredunknown

c2::21000004cf72e0fcdisk connectedconfiguredunknown

c2::21000004cf72e368disk connectedconfiguredunknown

c2::5080020000174839ESI connectedconfiguredunknown

c5fcconnectedunconfigured unknown

c7fc-fabricconnectedunconfigured unknown

c7::50001fe150061f09array-ctrlconnectedunconfigured unknown

c7::50001fe150061f0barray-ctrlconnectedunconfigured unknown

c7::50001fe150061f0darray-ctrlconnectedunconfigured unknown

c7::50001fe150061f0farray-ctrlconnectedunconfigured unknown

pcisch0:hpc1_slot0 fibre/hpconnectedconfiguredok

pcisch0:hpc1_slot1 unknownemptyunconfigured unknown

pcisch0:hpc1_slot2 unknownemptyunconfigured unknown

pcisch0:hpc1_slot3 fibre/hpconnectedconfiguredok

pcisch2:hpc2_slot4 unknownemptyunconfigured unknown

pcisch2:hpc2_slot5 vgs8514/hpconnectedconfiguredok

pcisch2:hpc2_slot6 fibre/hpconnectedconfiguredok

pcisch3:hpc0_slot7 unknownemptyunconfigured unknown

pcisch3:hpc0_slot8 pci-pci/hpconnectedconfiguredok

<img src="images/smiley_icons/icon_cool.gif" border=0 alt="Cool"> # cfgadm -c configure c7

(Output)

cfgadm: Library error: failed to create device node: 50001fe150061f0d: Invalid argument

failed to create device node: 50001fe150061f0f: Invalid argument

failed to create device node: 50001fe150061f09: Invalid argument

failed to create device node: 50001fe150061f0b: Invalid argument

failed to configure ANY device on FCA port

Current I can't see the disks that are presented by the EVA8000 san but I'm at a lost why?. the only thing I have noticed is that the out from the format command is very different EG

Before card was put in :-

AVAILABLE DISK SELECTIONS:

0. c1t0d0 <SUN36G cyl 24620 alt 2 hd 27 sec 107>

/<a href="mailto:pci@9" target="_blank">pci@9</a>,600000/<a href="mailto:pci@1" target="_blank">pci@1</a>/SUNW,<a href="mailto:qlc@4" target="_blank">qlc@4</a>/<a href="mailto:fp@0" target="_blank">fp@0</a>,0/<a href="mailto:ssd@w22000004cf72e368" target="_blank">ssd@w22000004cf72e368</a>,0

1. c1t1d0 <SUN36G cyl 24620 alt 2 hd 27 sec 107>

2. c1t2d0 <SUN36G cyl 24620 alt 2 hd 27 sec 107>

3. c1t3d0 <SUN36G cyl 24620 alt 2 hd 27 sec 107>

4. c1t4d0 <SUN36G cyl 24620 alt 2 hd 27 sec 107>

5. c1t5d0 <SUN36G cyl 24620 alt 2 hd 27 sec 107>

6. c2t0d0 <SUN36G cyl 24620 alt 2 hd 27 sec 107>

/<a href="mailto:pci@8" target="_blank">pci@8</a>,600000/SUNW,<a href="mailto:qlc@2" target="_blank">qlc@2</a>/<a href="mailto:fp@0" target="_blank">fp@0</a>,0/<a href="mailto:ssd@w21000004cf72e368" target="_blank">ssd@w21000004cf72e368</a>,0

7. c2t1d0 <SUN36G cyl 24620 alt 2 hd 27 sec 107>

8. c2t2d0 <SUN36G cyl 24620 alt 2 hd 27 sec 107>

9. c2t3d0 <SUN36G cyl 24620 alt 2 hd 27 sec 107>

10. c2t4d0 <SUN36G cyl 24620 alt 2 hd 27 sec 107>

11. c2t5d0 <SUN36G cyl 24620 alt 2 hd 27 sec 107>

12. c3t5d20 <DEC-HSG80-V86F cyl 29525 alt 2 hd 20 sec 254>

/<a href="mailto:pci@8" target="_blank">pci@8</a>,700000/JNI,<a href="mailto:FCE@2" target="_blank">FCE@2</a>/<a href="mailto:sd@5" target="_blank">sd@5</a>,14

After the cards was put in :-

AVAILABLE DISK SELECTIONS:

0. c1t0d0 <SUN36G cyl 24620 alt 2 hd 27 sec 107>

1. c1t1d0 <SUN36G cyl 24620 alt 2 hd 27 sec 107>

2. c1t2d0 <SUN36G cyl 24620 alt 2 hd 27 sec 107>

3. c1t3d0 <SUN36G cyl 24620 alt 2 hd 27 sec 107>

4. c1t4d0 <SUN36G cyl 24620 alt 2 hd 27 sec 107>

5. c1t5d0 <SUN36G cyl 24620 alt 2 hd 27 sec 107>

6. c3t5d20 <DEC-HSG80-V86F cyl 29525 alt 2 hd 20 sec 254>

/<a href="mailto:pci@8" target="_blank">pci@8</a>,700000/JNI,<a href="mailto:FCE@2" target="_blank">FCE@2</a>/<a href="mailto:sd@5" target="_blank">sd@5</a>,14

7. c6t20000004CF72BEBEd0 <SUN36G cyl 24620 alt 2 hd 27 sec 107>

/scsi_vhci/<a href="mailto:ssd@g20000004cf72bebe" target="_blank">ssd@g20000004cf72bebe</a>

8. c6t20000004CF72C79Bd0 <SUN36G cyl 24620 alt 2 hd 27 sec 107>

/scsi_vhci/<a href="mailto:ssd@g20000004cf72c79b" target="_blank">ssd@g20000004cf72c79b</a>

9. c6t20000004CF72DD18d0 <SUN36G cyl 24620 alt 2 hd 27 sec 107>

/scsi_vhci/<a href="mailto:ssd@g20000004cf72dd18" target="_blank">ssd@g20000004cf72dd18</a>

10. c6t20000004CF72DDB3d0 <SUN36G cyl 24620 alt 2 hd 27 sec 107>

/scsi_vhci/<a href="mailto:ssd@g20000004cf72ddb3" target="_blank">ssd@g20000004cf72ddb3</a>

11. c6t20000004CF72E0FCd0 <SUN36G cyl 24620 alt 2 hd 27 sec 107>

/scsi_vhci/<a href="mailto:ssd@g20000004cf72e0fc" target="_blank">ssd@g20000004cf72e0fc</a>

12. c6t20000004CF72E368d0 <SUN36G cyl 24620 alt 2 hd 27 sec 107>

/scsi_vhci/<a href="mailto:ssd@g20000004cf72e368" target="_blank">ssd@g20000004cf72e368</a>

Sorry about the long post I'd tried to get all te relvent infomation in, Any help would be appricated!

Thanks

[15360 byte] By [mcq-5000] at [2007-11-25 23:03:50]

Java programming resources: FAQs, tutorials, compiler and browser download sites, documentation, books lists, IDEs, etc.

Conecting a V880 to a EVA8000 san

Storage Forums New Topic

Storage Forums Hot Topic

Storage Forums

All Classified