Sun E250 blank Screen... Need help
Hi everyone,
Currently I have moved my E250 server back from my customer site. It was working last week and now when I tried to power up it does not reach the Open Boot prompt.
I will start with the LED light located on the front panel. Only the green light which is the power light is on. Normally there an amber light that will blink that which the machine will work fine. Now that light does not blink at all.
Also there is other LED fault light that appear like powersupply, hardisk and room tempearture.
Therefore need helps from any gurus here. Do you think is there any component that was loose inside the system like memory or CPU ? If so I believe the LED light will appear as fault which now it has none.
Thanks...
Regards
Jeremy
Email : <a href="mailto:jktlee@tm.net.my" target="_blank">jktlee@tm.net.my</a>
[913 byte] By [
] at [2007-11-25 22:48:14]
# 1
Im dealing with a similar problem with my E250. It Got reset during a Solaris installation. My screen would not turn on either. I got more info by hooking up a serial console. It performs its POST diagnotics, but then fails a CRC check when loading openBoot (i think), as follows. This repeats indefinitly. I havent solved it yet.
--
@(#) Sun (TM) Enterprise 250 3.12 Version 12 created 1999/02/16 13:49
Online: CPU0 Ultra-II (v2.0) 3:1 2048KB 2-2 ECache MCap 13
Online: CPU1 Ultra-II (v2.0) 3:1 2048KB 2-2 ECache MCap 13
Setting system ECache size to 2048KB
Clearing DTAGS...Done
Clearing E-Cache Tags...Done
Clearing I/D TLBs...Done
Probing Memory...Done
HiMem base = 0000.0000.2000.0000size = 0000.0000.2000.0000
Clearing Memory...including Unix Retained Memory...Done
MMUs ON
Copying ROM to RAM...Done
RAM CRC = 0000.0000.d200.e887; ROM CRC = 0000.0000.833e.58bf
? RAM-Copy CRC failure!
Decompressing into Memory...0000.0000.0004.44f8 (274KB)...Done
Size = 0000.0000.0008.39dd (527KB)
Starting Forth kernel at 0000.0000.f005.89c0
Clearing E-Cache Tags...
Fatal Reset
SC Control: 0000.0000.0200.0000
SC CP0 CFG: 0000.0000.0100.4000STS: 0000.0000.40c0.0000
SC CP1 CFG: 0000.0000.0100.4000STS: 0000.0000.00c0.0000
SC P1F CFG: 0000.0000.8110.4000STS: 0000.0000.0100.0000
SC CCFAULT: 0000.0000.4000.c000
CPU AFSR:0000.0001.8c00.0000AFAR: 0000.0000.0000.0fe0
CPU UDBH:0000.0000.0000.0000UDBL: 7fff.f416.0100.0000
<a href="mailto:P@1F" target="_blank">P@1F</a> Ctrl: 04f8.0000.0000.0000
UE AFSR: 0000.6f47.5e80.0000AFAR: 0000.019f.fdff.e4f2
CE AFSR: 00b7.effd.df80.0000AFAR: 0000.01f3.fc77.feff
-
at 2007-7-5 17:03:36 >
# 2
Hi, ive found a little more info on my prob.
Ive tried swapping the memory and the cpus, and ive removed all scsi and pci... didnt help.
I tried a high half boot, get nothing from the console. Plugging in the keyboard, i just get all four LEDs to flash once. So high boot does nothing. Normal boot detects CRC error, successfully decompresses anyways, but the Forth kernel chokes when it is started.
Tried the NVRAM in a 220R, works fine
I Disassembled the E250 3.12.12 OBP Patch and found the hardcoded ROM CRC, 833e.58bf, which i assume must be the correct CRC. This leads me to think that my flash got corrupted (or it gets damaged going from ROM to RAM?).
Looks like my only option is to attempt to correct the flash memory. Anyone know the best way to go about this?
-Doesnt look like the E250 supports user flash...
-Info on ROMBO is very scarce, I wonder if i could even find one?
-Seems i might be able to get at the flash through some sort of JTAG interface. Probably the best way if it is possible.
Anyone have any ideas which avoid playing with the flash?
Thanks
at 2007-7-5 17:03:36 >
# 3
Hello gurus of sun,
I am also having te same problem as Jeremy(JLEE) but only differeance is,
Normally there an amber light that will blink whch indicate the machine will work fine. Now that light does blink. It keeps on blinking.
But no display, tried witha bootable CD too. but no luck..
gurus we require your help badly..
bangaarm
# 4
Warning this command will reset all nvram parameters back to default. Any customer setting will be lost.
Make sure the covers are on, there is a power toggle switch (can't remeber correct terminology for it) that needs to be pushed in by cover in order to receive power to unit when you turn the key.
Anyways poweroff the unit with the key, hold down the stop and N key at the same time and continue to hold them down while powering on the unit and hold for 30 seconds or more. See if this gets your video back.
Otherwise the best way to trouble shoot something like this is to minimize the amount of memory and cpus. So 1 bank of memory (1 bank is 4 simms) which can go in any bank but I would start with bank A and 1 cpu in upa slot 0 which is bottom cpu slot. If still no video try the other cpu in slot 0. If that still does not fix it then try removing the 4 sticks of memory and installing a different set of 4.
Thanks
cndcadams
# 5
Same problem with one of my E450.
It just happens several times a day from normal Solaris running level 3, never at same place or command.
There were no recent interventions on the server.
Pls. help
=======================================
/# vxprint -hrt oracle_vol
Disk group: oracledg
RV NAME RLINK_CNTKSTATESTATEPRIMARY DATAVOLS SRL
RL NAME
Fatal Reset
SC Control: 0000.0000.0200.0000
SC CP0 CFG: 0000.0000.0100.4000STS: 0000.0000.c1e0.0000
SC CP1 CFG: 0000.0000.0100.4000STS: 0000.0000.01e0.0000
SC CP2 CFG: 0000.0000.0100.4000STS: 0000.0000.01e0.0000
SC CP3 CFG: 0000.0000.0100.4000STS: 0000.0000.01e0.0000
SC P1F CFG: 0000.0000.0110.4000STS: 0000.0000.4100.0000
SC P06 CFG: 0000.0000.0110.4000STS: 0000.0000.0100.0000
SC P04 CFG: 0000.0000.0110.4000STS: 0000.0000.0100.0000
SC SIFault: 0000.0000.0000.0000
CPU AFSR:0000.0001.a801.0000AFAR: 0000.01ff.f150.0000
CPU UDBH:0000.0000.0000.0000UDBL: 7fff.f39a.0100.0000
P@1F Ctrl: 04f8.0000.0000.0000
UE AFSR: 0000.bbfd.ff80.0000AFAR: 0000.019b.f737.6dd4
CE AFSR: 001e.ca31.4200.0000AFAR: 0000.000f.6ee8.6cc5
P@06 Ctrl: 04f8.0000.0000.0000
UE AFSR: 0000.00d9.3480.0000AFAR: 0000.0081.8a00.ad20
CE AFSR: 0010.0800.0100.0000AFAR: 0000.0080.0910.4448
P@04 Ctrl: 04f8.0000.0000.0000
UE AFSR: 0000.c731.8000.0000AFAR: 0000.00c0.0813.0440
CE AFSR: 0006.cdbe.9f00.0000AFAR: 0000.00d4.b877.9d60
CPU0 has assumed the role of Boot CPU
@(#) Sun Ultra 450 3.22 Version 0 created 2000/12/20 16:31
Online: CPU0 Ultra-II (v10.0) 4:1 4096KB 2-2 ECache MCap 7
Online: CPU1 Ultra-II (v10.0) 4:1 4096KB 2-2 ECache MCap 7
Online: CPU2 Ultra-II (v10.0) 4:1 4096KB 2-2 ECache MCap 7
Online: CPU3 Ultra-II (v10.0) 4:1 4096KB 2-2 ECache MCap 7
Motherboard DTAG SRAMs support up to 8192KB of ECache per CPU Module
Setting system ECache size to 4096KB
Clearing DTAGS...Done
Auxio Level = 0000.0000.0000.000f
Clearing E-Cache Tags...Done
Clearing I/D TLBs...Done
Probing Memory...Done
HiMem base = 0000.0000.8000.0000size = 0000.0000.4000.0000
Clearing Memory...Done
MMUs ON
Copying ROM to RAM...Done
RAM CRC = 0000.0000.adff.802f; ROM CRC = 0000.0000.adff.802f
Decompressing into Memory...0000.0000.0004.4c04 (276KB)...Done
Size = 0000.0000.0008.49e0 (531KB)
Starting Forth kernel at 0000.0000.f005.9d3c
ttya initialized
Memory in 1 - way interleave configuration
...Bank #0 256 + 256 + 256 + 256 : 1024 MB[Available 1024MB @ 0 ]
...Bank #1 256 + 256 + 256 + 256 : 1024 MB[Available 1024MB @ 40000000 ]
...Bank #2 256 + 256 + 256 + 256 : 1024 MB[Available 1024MB @ 80000000 ]
...Bank #30 +0 +0 +0 :0 MB
Programming memory controller for 10ns/100MHz UPA timing
Environmental monitor: enabled
Probing Floppy: drive detected on ID0
Probing Audio: audio codec not present
Primary UPA probing
Probing all UPA slots ................................Done.
At UPA Slot 0 Created Node(s)...SUNW,UltraSPARC-II
At UPA Slot 1 Created Node(s)...SUNW,UltraSPARC-II
At UPA Slot 2 Created Node(s)...SUNW,UltraSPARC-II
At UPA Slot 3 Created Node(s)...SUNW,UltraSPARC-II
At UPA Slot 4 Created Node(s)...pci pci
At UPA Slot 6 Created Node(s)...pci pci
At UPA Slot 1f Created Node(s)...pci pci
Primary I/O probing
Probing /pci@1f,4000 at Device 1 network
Probing /pci@1f,4000 at Device 3 scsi disk tape
Probing /pci@1f,4000 at Device 2 scsi disk tape
Probing /pci@1f,4000 at Device 4 Nothing there
Probing /pci@1f,2000 at Device 0 This slot excluded from probing...
Probing /pci@1f,2000 at Device 1 pci
Probing /pci@1f,2000/pci@1 at Device 0 pci108e,1000 SUNW,qfe
Probing /pci@1f,2000/pci@1 at Device 1 pci108e,1000 SUNW,qfe
Probing /pci@1f,2000/pci@1 at Device 2 pci108e,1000 SUNW,qfe
Probing /pci@1f,2000/pci@1 at Device 3 pci108e,1000 SUNW,qfe
Probing /pci@1f,2000/pci@1 at Device 4 Nothing there
Probing /pci@1f,2000/pci@1 at Device 5 Nothing there
Probing /pci@1f,2000/pci@1 at Device 6 Nothing there
Probing /pci@1f,2000/pci@1 at Device 7 Nothing there
Probing /pci@1f,2000/pci@1 at Device 8 Nothing there
Probing /pci@1f,2000/pci@1 at Device 9 Nothing there
Probing /pci@1f,2000/pci@1 at Device a Nothing there
Probing /pci@1f,2000/pci@1 at Device b Nothing there
Probing /pci@1f,2000/pci@1 at Device c Nothing there
Probing /pci@1f,2000/pci@1 at Device d Nothing there
Probing /pci@1f,2000/pci@1 at Device e Nothing there
Probing /pci@1f,2000/pci@1 at Device f Nothing there
Probing /pci@1f,2000 at Device 2 Nothing there
Probing /pci@1f,2000 at Device 3 Nothing there
Probing /pci@1f,2000 at Device 4 Nothing there
Probing /pci@1f,2000 at Device 5 Nothing there
Probing /pci@6,4000 at Device 0 This slot excluded from probing...
Probing /pci@6,4000 at Device 1 Nothing there
Probing /pci@6,4000 at Device 2 Nothing there
Probing /pci@6,4000 at Device 3 scsi disk tape scsi disk tape
Probing /pci@6,4000 at Device 4 scsi disk tape scsi disk tape
Probing /pci@6,4000 at Device 5 Nothing there
Probing /pci@6,2000 at Device 0 This slot excluded from probing...
Probing /pci@6,2000 at Device 1 Nothing there
Probing /pci@6,2000 at Device 2 Nothing there
Probing /pci@6,2000 at Device 3 Nothing there
Probing /pci@6,2000 at Device 4 Nothing there
Probing /pci@6,2000 at Device 5 Nothing there
Probing /pci@4,4000 at Device 0 This slot excluded from probing...
Probing /pci@4,4000 at Device 1 Nothing there
Probing /pci@4,4000 at Device 2 Nothing there
Probing /pci@4,4000 at Device 3 Nothing there
Probing /pci@4,4000 at Device 4 Nothing there
Probing /pci@4,4000 at Device 5 Nothing there
Probing /pci@4,2000 at Device 0 This slot excluded from probing...
Probing /pci@4,2000 at Device 1 Nothing there
Probing /pci@4,2000 at Device 2 Nothing there
Probing /pci@4,2000 at Device 3 Nothing there
Probing /pci@4,2000 at Device 4 Nothing there
Probing /pci@4,2000 at Device 5 Nothing there
Can't open input device.
screen not found.
Can't open input device.
Keyboard not present. Using ttya for input and output.
Keyboard not present. Using ttya for input and output.
Memory in 1 - way interleave configuration
...Bank #0 256 + 256 + 256 + 256 : 1024 MB[Available 1024MB @ 0 ]
...Bank #1 256 + 256 + 256 + 256 : 1024 MB[Available 1024MB @ 40000000 ]
...Bank #2 256 + 256 + 256 + 256 : 1024 MB[Available 1024MB @ 80000000 ]
...Bank #30 +0 +0 +0 :0 MB
Programming memory controller for 10ns/100MHz UPA timing
Environmental monitor: enabled
Probing Floppy: drive detected on ID0
Probing Audio: audio codec not present
Primary UPA probing
Probing all UPA slots ................................Done.
At UPA Slot 0 Created Node(s)...SUNW,UltraSPARC-II
At UPA Slot 1 Created Node(s)...SUNW,UltraSPARC-II
At UPA Slot 2 Created Node(s)...SUNW,UltraSPARC-II
At UPA Slot 3 Created Node(s)...SUNW,UltraSPARC-II
At UPA Slot 4 Created Node(s)...pci pci
At UPA Slot 6 Created Node(s)...pci pci
At UPA Slot 1f Created Node(s)...pci pci
Primary I/O probing
Probing /pci@1f,4000 at Device 1 network
Probing /pci@1f,4000 at Device 3 scsi disk tape
Probing /pci@1f,4000 at Device 2 scsi disk tape
Probing /pci@1f,4000 at Device 4 Nothing there
Probing /pci@1f,2000 at Device 0 This slot excluded from probing...
Probing /pci@1f,2000 at Device 1 pci
Probing /pci@1f,2000/pci@1 at Device 0 pci108e,1000 SUNW,qfe
Probing /pci@1f,2000/pci@1 at Device 1 pci108e,1000 SUNW,qfe
Probing /pci@1f,2000/pci@1 at Device 2 pci108e,1000 SUNW,qfe
Probing /pci@1f,2000/pci@1 at Device 3 pci108e,1000 SUNW,qfe
Probing /pci@1f,2000/pci@1 at Device 4 Nothing there
Probing /pci@1f,2000/pci@1 at Device 5 Nothing there
Probing /pci@1f,2000/pci@1 at Device 6 Nothing there
Probing /pci@1f,2000/pci@1 at Device 7 Nothing there
Probing /pci@1f,2000/pci@1 at Device 8 Nothing there
Probing /pci@1f,2000/pci@1 at Device 9 Nothing there
Probing /pci@1f,2000/pci@1 at Device a Nothing there
Probing /pci@1f,2000/pci@1 at Device b Nothing there
Probing /pci@1f,2000/pci@1 at Device c Nothing there
Probing /pci@1f,2000/pci@1 at Device d Nothing there
Probing /pci@1f,2000/pci@1 at Device e Nothing there
Probing /pci@1f,2000/pci@1 at Device f Nothing there
Probing /pci@1f,2000 at Device 2 Nothing there
Probing /pci@1f,2000 at Device 3 Nothing there
Probing /pci@1f,2000 at Device 4 Nothing there
Probing /pci@1f,2000 at Device 5 Nothing there
Probing /pci@6,4000 at Device 0 This slot excluded from probing...
Probing /pci@6,4000 at Device 1 Nothing there
Probing /pci@6,4000 at Device 2 Nothing there
Probing /pci@6,4000 at Device 3 scsi disk tape scsi disk tape
Probing /pci@6,4000 at Device 4 scsi disk tape scsi disk tape
Probing /pci@6,4000 at Device 5 Nothing there
Probing /pci@6,2000 at Device 0 This slot excluded from probing...
Probing /pci@6,2000 at Device 1 Nothing there
Probing /pci@6,2000 at Device 2 Nothing there
Probing /pci@6,2000 at Device 3 Nothing there
Probing /pci@6,2000 at Device 4 Nothing there
Probing /pci@6,2000 at Device 5 Nothing there
Probing /pci@4,4000 at Device 0 This slot excluded from probing...
Probing /pci@4,4000 at Device 1 Nothing there
Probing /pci@4,4000 at Device 2 Nothing there
Probing /pci@4,4000 at Device 3 Nothing there
Probing /pci@4,4000 at Device 4 Nothing there
Probing /pci@4,4000 at Device 5 Nothing there
Probing /pci@4,2000 at Device 0 This slot excluded from probing...
Probing /pci@4,2000 at Device 1 Nothing there
Probing /pci@4,2000 at Device 2 Nothing there
Probing /pci@4,2000 at Device 3 Nothing there
Probing /pci@4,2000 at Device 4 Nothing there
Probing /pci@4,2000 at Device 5 Nothing there
Sun Enterprise 450 (4 X UltraSPARC-II 400MHz), No Keyboard
OpenBoot 3.22, 3072 MB memory installed, Serial #11954957.
Ethernet address 8:0:20:b6:6b:d, Host ID: 80b66b0d.
Initializing1 megs of memory at addr bfeb6000
Initializing1 megs of memory at addr bfe00000
Initializing2 megs of memory at addr bfc02000
Initializing12 megs of memory at addr bf002000
Initializing 3056 megs of memory at addr0
{0} ok
=======================
Jpeda at 2007-7-5 17:03:36 >
# 6
Hello,
Sun Enterprise 450 (4 X UltraSPARC-II 400MHz), No Keyboard
OpenBoot 3.22, 3072 MB memory installed, Serial #...
your OBP is way too old, more recent versions added better support to diagnose RED STATE exceptions
These are the latest versions contained in patch 106122-11:
OBP3.30.0 2003/10/28 15:27
POST6.1.0 2000/10/24 10:49
OBDIAG 4.5.1 2000/10/24 10:48
Schedule downtime to update the OBP.
Michael
# 7
I did OBP upgrade. Problem is still there and I don't see anything in the DIAG.
=====================
crmyulsrv:/# df -k
Filesystemkbytesusedavail capacity Mounted on
/dev/vx/dsk/rootvol 5445200 4484851 90589784%/
/proc 0000%/proc
fd 0000%/dev/fd
mnttab 0000%/etc/mnttab
swap58853040 58853040%/var/run
crmyulsrv:/#
Fatal Reset
SC Control: 0000.0000.0200.0000
SC CP0 CFG: 0000.0000.0100.4000STS: 0000.0000.c1e0.0000
SC CP1 CFG: 0000.0000.0100.4000STS: 0000.0000.01e0.0000
SC CP2 CFG: 0000.0000.0100.4000STS: 0000.0000.01e0.0000
SC CP3 CFG: 0000.0000.0100.4000STS: 0000.0000.01e0.0000
SC P1F CFG: 0000.0000.0110.4000STS: 0000.0000.0100.0000
SC P06 CFG: 0000.0000.0110.4000STS: 0000.0000.0100.0000
SC P04 CFG: 0000.0000.0110.4000STS: 0000.0000.0100.0000
SC SIFault: 0000.0000.0000.0000
CPU AFSR:0000.0001.a801.0000AFAR: 0000.01ff.f150.0000
CPU UDBH:0000.0000.0000.0000UDBL: 7fff.f37e.0100.0000
P@1F Ctrl: 04f8.0000.0000.0000
UE AFSR: 0000.ff00.2000.0000AFAR: 0000.01fe.0000.b008
CE AFSR: 0080.ff00.2000.0000AFAR: 0000.01fe.0000.b008
P@06 Ctrl: 04f8.0000.0000.0000
UE AFSR: 0000.ff00.2000.0000AFAR: 0000.01cc.0000.b008
CE AFSR: 0080.ff00.2000.0000AFAR: 0000.01cc.0000.b008
P@04 Ctrl: 04f8.0000.0000.0000
UE AFSR: 0000.ff00.2000.0000AFAR: 0000.01c8.0000.b008
CE AFSR: 0080.ff00.2000.0000AFAR: 0000.01c8.0000.b008
CPU0 has assumed the role of Boot CPU
@(#) Sun Ultra 450 3.30 Version 0 created 2003/11/11 10:41
Online: CPU0 Ultra-II (v10.0) 4:1 4096KB 2-2 ECache MCap 7
Online: CPU1 Ultra-II (v10.0) 4:1 4096KB 2-2 ECache MCap 7
Online: CPU2 Ultra-II (v10.0) 4:1 4096KB 2-2 ECache MCap 7
Online: CPU3 Ultra-II (v10.0) 4:1 4096KB 2-2 ECache MCap 7
Motherboard DTAG SRAMs support up to 8192KB of ECache per CPU Module
Setting system ECache size to 4096KB
Clearing DTAGS...Done
Auxio Level = 0000.0000.0000.000f
Clearing E-Cache Tags...Done
Clearing I/D TLBs...Done
Probing Memory...Done
HiMem base = 0000.0000.8000.0000size = 0000.0000.4000.0000
Clearing Memory...Done
MMUs ON
Copying ROM to RAM...Done
RAM CRC = 0000.0000.4267.f1bc; ROM CRC = 0000.0000.4267.f1bc
Decompressing into Memory...0000.0000.0004.4ec0 (276KB)...Done
Size = 0000.0000.0008.4a70 (531KB)
Starting Forth kernel at 0000.0000.f005.9dbc
ttya initialized
Memory in 1 - way interleave configuration
...Bank #0 256 + 256 + 256 + 256 : 1024 MB[Available 1024MB @ 0 ]
...Bank #1 256 + 256 + 256 + 256 : 1024 MB[Available 1024MB @ 40000000 ]
...Bank #2 256 + 256 + 256 + 256 : 1024 MB[Available 1024MB @ 80000000 ]
...Bank #30 +0 +0 +0 :0 MB
Programming memory controller for 10ns/100MHz UPA timing
Environmental monitor: enabled
Probing Floppy: drive detected on ID0
Probing Audio: audio codec not present
Primary UPA probing
Probing all UPA slots ................................Done.
At UPA Slot 0 Created Node(s)...SUNW,UltraSPARC-II
At UPA Slot 1 Created Node(s)...SUNW,UltraSPARC-II
At UPA Slot 2 Created Node(s)...SUNW,UltraSPARC-II
At UPA Slot 3 Created Node(s)...SUNW,UltraSPARC-II
At UPA Slot 4 Created Node(s)...pci pci
At UPA Slot 6 Created Node(s)...pci pci
At UPA Slot 1f Created Node(s)...pci pci
Primary I/O probing
Probing /pci@1f,4000 at Device 1 network
Probing /pci@1f,4000 at Device 3 scsi disk tape
Probing /pci@1f,4000 at Device 2 scsi disk tape
Probing /pci@1f,4000 at Device 4 Nothing there
Probing /pci@1f,2000 at Device 0 This slot excluded from probing...
Probing /pci@1f,2000 at Device 1 pci
Probing /pci@1f,2000/pci@1 at Device 0 pci108e,1000 SUNW,qfe
Probing /pci@1f,2000/pci@1 at Device 1 pci108e,1000 SUNW,qfe
Probing /pci@1f,2000/pci@1 at Device 2 pci108e,1000 SUNW,qfe
Probing /pci@1f,2000/pci@1 at Device 3 pci108e,1000 SUNW,qfe
Probing /pci@1f,2000/pci@1 at Device 4 Nothing there
Probing /pci@1f,2000/pci@1 at Device 5 Nothing there
Probing /pci@1f,2000/pci@1 at Device 6 Nothing there
Probing /pci@1f,2000/pci@1 at Device 7 Nothing there
Probing /pci@1f,2000/pci@1 at Device 8 Nothing there
Probing /pci@1f,2000/pci@1 at Device 9 Nothing there
Probing /pci@1f,2000/pci@1 at Device a Nothing there
Probing /pci@1f,2000/pci@1 at Device b Nothing there
Probing /pci@1f,2000/pci@1 at Device c Nothing there
Probing /pci@1f,2000/pci@1 at Device d Nothing there
Probing /pci@1f,2000/pci@1 at Device e Nothing there
Probing /pci@1f,2000/pci@1 at Device f Nothing there
Probing /pci@1f,2000 at Device 2 Nothing there
Probing /pci@1f,2000 at Device 3 Nothing there
Probing /pci@1f,2000 at Device 4 Nothing there
Probing /pci@1f,2000 at Device 5 Nothing there
Probing /pci@6,4000 at Device 0 This slot excluded from probing...
Probing /pci@6,4000 at Device 1 Nothing there
Probing /pci@6,4000 at Device 2 Nothing there
Probing /pci@6,4000 at Device 3 scsi disk tape scsi disk tape
Probing /pci@6,4000 at Device 4 scsi disk tape scsi disk tape
Probing /pci@6,4000 at Device 5 Nothing there
Probing /pci@6,2000 at Device 0 This slot excluded from probing...
Probing /pci@6,2000 at Device 1 Nothing there
Probing /pci@6,2000 at Device 2 Nothing there
Probing /pci@6,2000 at Device 3 Nothing there
Probing /pci@6,2000 at Device 4 Nothing there
Probing /pci@6,2000 at Device 5 Nothing there
Probing /pci@4,4000 at Device 0 This slot excluded from probing...
Probing /pci@4,4000 at Device 1 Nothing there
Probing /pci@4,4000 at Device 2 Nothing there
Probing /pci@4,4000 at Device 3 Nothing there
Probing /pci@4,4000 at Device 4 Nothing there
Probing /pci@4,4000 at Device 5 Nothing there
Probing /pci@4,2000 at Device 0 This slot excluded from probing...
Probing /pci@4,2000 at Device 1 Nothing there
Probing /pci@4,2000 at Device 2 Nothing there
Probing /pci@4,2000 at Device 3 Nothing there
Probing /pci@4,2000 at Device 4 Nothing there
Probing /pci@4,2000 at Device 5 Nothing there
Can't open input device.
screen not found.
Can't open input device.
Keyboard not present. Using ttya for input and output.
Keyboard not present. Using ttya for input and output.
Memory in 1 - way interleave configuration
...Bank #0 256 + 256 + 256 + 256 : 1024 MB[Available 1024MB @ 0 ]
...Bank #1 256 + 256 + 256 + 256 : 1024 MB[Available 1024MB @ 40000000 ]
...Bank #2 256 + 256 + 256 + 256 : 1024 MB[Available 1024MB @ 80000000 ]
...Bank #30 +0 +0 +0 :0 MB
Programming memory controller for 10ns/100MHz UPA timing
Environmental monitor: enabled
Probing Floppy: drive detected on ID0
Probing Audio: audio codec not present
Primary UPA probing
Probing all UPA slots ................................Done.
At UPA Slot 0 Created Node(s)...SUNW,UltraSPARC-II
At UPA Slot 1 Created Node(s)...SUNW,UltraSPARC-II
At UPA Slot 2 Created Node(s)...SUNW,UltraSPARC-II
At UPA Slot 3 Created Node(s)...SUNW,UltraSPARC-II
At UPA Slot 4 Created Node(s)...pci pci
At UPA Slot 6 Created Node(s)...pci pci
At UPA Slot 1f Created Node(s)...pci pci
Primary I/O probing
Probing /pci@1f,4000 at Device 1 network
Probing /pci@1f,4000 at Device 3 scsi disk tape
Probing /pci@1f,4000 at Device 2 scsi disk tape
Probing /pci@1f,4000 at Device 4 Nothing there
Probing /pci@1f,2000 at Device 0 This slot excluded from probing...
Probing /pci@1f,2000 at Device 1 pci
Probing /pci@1f,2000/pci@1 at Device 0 pci108e,1000 SUNW,qfe
Probing /pci@1f,2000/pci@1 at Device 1 pci108e,1000 SUNW,qfe
Probing /pci@1f,2000/pci@1 at Device 2 pci108e,1000 SUNW,qfe
Probing /pci@1f,2000/pci@1 at Device 3 pci108e,1000 SUNW,qfe
Probing /pci@1f,2000/pci@1 at Device 4 Nothing there
Probing /pci@1f,2000/pci@1 at Device 5 Nothing there
Probing /pci@1f,2000/pci@1 at Device 6 Nothing there
Probing /pci@1f,2000/pci@1 at Device 7 Nothing there
Probing /pci@1f,2000/pci@1 at Device 8 Nothing there
Probing /pci@1f,2000/pci@1 at Device 9 Nothing there
Probing /pci@1f,2000/pci@1 at Device a Nothing there
Probing /pci@1f,2000/pci@1 at Device b Nothing there
Probing /pci@1f,2000/pci@1 at Device c Nothing there
Probing /pci@1f,2000/pci@1 at Device d Nothing there
Probing /pci@1f,2000/pci@1 at Device e Nothing there
Probing /pci@1f,2000/pci@1 at Device f Nothing there
Probing /pci@1f,2000 at Device 2 Nothing there
Probing /pci@1f,2000 at Device 3 Nothing there
Probing /pci@1f,2000 at Device 4 Nothing there
Probing /pci@1f,2000 at Device 5 Nothing there
Probing /pci@6,4000 at Device 0 This slot excluded from probing...
Probing /pci@6,4000 at Device 1 Nothing there
Probing /pci@6,4000 at Device 2 Nothing there
Probing /pci@6,4000 at Device 3 scsi disk tape scsi disk tape
Probing /pci@6,4000 at Device 4 scsi disk tape scsi disk tape
Probing /pci@6,4000 at Device 5 Nothing there
Probing /pci@6,2000 at Device 0 This slot excluded from probing...
Probing /pci@6,2000 at Device 1 Nothing there
Probing /pci@6,2000 at Device 2 Nothing there
Probing /pci@6,2000 at Device 3 Nothing there
Probing /pci@6,2000 at Device 4 Nothing there
Probing /pci@6,2000 at Device 5 Nothing there
Probing /pci@4,4000 at Device 0 This slot excluded from probing...
Probing /pci@4,4000 at Device 1 Nothing there
Probing /pci@4,4000 at Device 2 Nothing there
Probing /pci@4,4000 at Device 3 Nothing there
Probing /pci@4,4000 at Device 4 Nothing there
Probing /pci@4,4000 at Device 5 Nothing there
Probing /pci@4,2000 at Device 0 This slot excluded from probing...
Probing /pci@4,2000 at Device 1 Nothing there
Probing /pci@4,2000 at Device 2 Nothing there
Probing /pci@4,2000 at Device 3 Nothing there
Probing /pci@4,2000 at Device 4 Nothing there
Probing /pci@4,2000 at Device 5 Nothing there
Sun Enterprise 450 (4 X UltraSPARC-II 400MHz), No Keyboard
OpenBoot 3.30, 3072 MB memory installed, Serial #11954957.
Ethernet address 8:0:20:b6:6b:d, Host ID: 80b66b0d.
Initializing1 megs of memory at addr bfeb6000
Initializing1 megs of memory at addr bfe00000
Initializing2 megs of memory at addr bfc02000
Initializing12 megs of memory at addr bf002000
Initializing 3056 megs of memory at addr0
{0} ok
======================
{0} ok printenv
Variable Name Value Default Value
tpe-link-test?truetrue
scsi-initiator-id77
keyboard-click?false false
keymap
ttyb-rts-dtr-offfalse false
ttyb-ignore-cdtruetrue
ttya-rts-dtr-offfalse false
ttya-ignore-cdtruetrue
ttyb-mode 9600,8,n,1,-9600,8,n,1,-
ttya-mode 9600,8,n,1,-9600,8,n,1,-
pci-slot-skip-listnonenone
pci0-probe-list1,3,2,41,3,2,4
upa-port-skip-listnonenone
memory-interleaveautoauto
disk-led-assoc00
diag-levelmaxmin
diag-scriptnormal normal
diag-targets nonenone
diag-trigger power-resetpower-reset
diag-continue?false false
diag-passes11
diag-verbosityverbosetests
env-monitorenabledenabled
mfg-optionsserver
#power-cycles 88
system-board-serial# 947H440A
system-board-date38458a32
fcode-debug? false false
output-device screen screen
input-device keyboardkeyboard
load-base 16384 16384
boot-command bootboot
auto-boot?false true
auto-boot-on-error?false false
watchdog-reboot?false false
diag-file
diag-devicenetnet
boot-file
boot-devicedisk:a disk1:a disk netdisk net
local-mac-address?false false
ansi-terminal?truetrue
screen-#columns8080
screen-#rows 3434
silent-mode? false false
use-nvramrc? false false
nvramrcdevalias vx-rootmirror / ...
security-mode none
security-password
security-#badlogins4096
oem-logo
oem-logo? false false
oem-banner
oem-banner?false false
diag-switch? truefalse
======================
Message was edited by:
Jpeda
Jpeda at 2007-7-5 17:03:36 >
# 8
Hi,
If you have a support contract with Sun for this box then i would log a case with them and sent them the Fatal Reset bit.... by the looks of the AFSR i'd say that this might have something to do with either the CPU's or maybe the memory but my bet would be on either one of the CPU's.....
What you could do is scale down the box and see if it still does this with just 1 cpu in there, then try and get it up and running with 2 and so on...
Cheers,
Nico
NicoB at 2007-7-5 17:03:36 >
# 9
> Hi,
>
> If you have a support contract with Sun for this box
> then i would log a case with them and sent them the
> Fatal Reset bit.... by the looks of the AFSR i'd say
> that this might have something to do with either the
> CPU's or maybe the memory but my bet would be on
> either one of the CPU's.....
>
> What you could do is scale down the box and see if it
> still does this with just 1 cpu in there, then try
> and get it up and running with 2 and so on...
>
> Cheers,
>
> Nico
Thanks a lot. No there is no Sunsolve contract on it and no chance to get one.
I'll try the CPU trick, I am confident.
Thanks again,
Jpeda at 2007-7-5 17:03:36 >
