During snoop. WARNING: received signal 11 from packet
During snooping the local ip address on a V240. I saw this error:
WARNING: received signal 11 from packet 780
What does it mean? Is the hardware faulty? Is snoop faulty?
The packet 780 was going outward and has xxxx in place of some data:
ETHER: -- Ether Header --
ETHER:
ETHER: Packet 780 arrived at 15:16:38.22
ETHER: Packet size = 696 bytes
ETHER: Destination = xxxx,
ETHER: Source= xxxx,
ETHER: Ethertype = 0800 (IP)
ETHER:
IP:-- IP Header --
IP:
IP:Version = 4
IP:Header length = 20 bytes
IP:Type of service = 0x00
IP: xxx. .... = 0 (precedence)
IP: ...0 .... = normal delay
IP: .... 0... = normal throughput
IP: .... .0.. = normal reliability
IP: .... ..0. = not ECN capable transport
IP: .... ...0 = no ECN congestion experienced
IP:Total length = 682 bytes
IP:Identification = 52818
IP:Flags = 0x4
IP: .1.. .... = do not fragment
IP: ..0. .... = last fragment
IP:Fragment offset = 0 bytes
IP:Time to live = 60 seconds/hops
IP:Protocol = 6 (TCP)
IP:Header checksum = 8762
IP:Source address = xxxx, xxxx
IP:Destination address = xxxx, xxxx
IP:No options
IP:
TCP: -- TCP Header --
TCP:
TCP: Source port = 389
TCP: Destination port = 62638
TCP: Sequence number = 2004482227
TCP: Acknowledgement number = 2710103459
TCP: Data offset = 20 bytes
TCP: Flags = 0x18
TCP:0... .... = No ECN congestion window reduced
TCP:.0.. .... = No ECN echo
TCP:..0. .... = No urgent pointer
TCP:...1 .... = Acknowledgement
TCP:.... 1... = Push
TCP:.... .0.. = No reset
TCP:.... ..0. = No Syn
TCP:.... ...0 = No Fin
TCP: Window = 49542
TCP: Checksum = 0xe935
TCP: Urgent pointer = 0
TCP: No options
