Hi all,
Here I have installed RH9 and Tarantella 3.40. and I have 2 network card.
First one is eth0 is for LAN and second is for static IP i.e eth1. my
application server is win2k and I can access application easily. Now my
problem is I want use client drive mapping here to save users work and
Client printing for print the reports. Can anyone help how to do that ?
Thanks Regards,
Rachana.
I assume that when you say eth1 is "static IP", you meant this one connects
to the internet.
What you need to do are:
- change the external DNS name in Tarantella to use the hostname of your
eth1 interface
- install the enhancement module on your W2K server
- enable Client Drive Mapping in array manager
All users will access the Tarantella server using the hostname of eth1
Hope this helps.
"Rachana Salavi " <rachana_salavi@yahoo.com> wrote in message
news:cs8fl4$bna$1@mint.tarantella.com...
> Hi all,
>
> Here I have installed RH9 and Tarantella 3.40. and I have 2 network card.
> First one is eth0 is for LAN and second is for static IP i.e eth1. my
> application server is win2k and I can access application easily. Now my
> problem is I want use client drive mapping here to save users work and
> Client printing for print the reports. Can anyone help how to do that ?
>
> Thanks Regards,
>
> Rachana.
>
>
Hi Escape 27,
Thanks for your reply.
First I tried in array manager to change DNS Name, second I have installed
enhancement module on w2k server. But still I facing same CDM problem. In
w2k server \"C:\Program Files \Tarantella \Enhancement Module\ttatdm.exe\"
I seen this error \"C:\Add device failed with ERROR_BAD_NETPATH\".
F.Y.I. I am not created Domain here because I have Static IP and I want to
access thought simple Internet.
help is appreciate.
Thanks,
Rachana Salavi
Escape 27 wrote:
> I assume that when you say eth1 is \"static IP\", you meant this one
connects
> to the internet.
> What you need to do are:
> - change the external DNS name in Tarantella to use the hostname of your
> eth1 interface
> - install the enhancement module on your W2K server
> - enable Client Drive Mapping in array manager
> All users will access the Tarantella server using the hostname of eth1
> Hope this helps.
> \"Rachana Salavi \" <rachana_salavi@yahoo.com> wrote in message
> news:cs8fl4$bna$1@mint.tarantella.com...
> > Hi all,
> >
> > Here I have installed RH9 and Tarantella 3.40. and I have 2 network card.
> > First one is eth0 is for LAN and second is for static IP i.e eth1. my
> > application server is win2k and I can access application easily. Now my
> > problem is I want use client drive mapping here to save users work and
> > Client printing for print the reports. Can anyone help how to do that ?
> >
> > Thanks Regards,
> >
> > Rachana.
> >
> >
Try enabling the WINS server in Array Manager and add it to your W2K server.
"Rachana" <rachana_salavi@yahoo.com> wrote in message
news:csg8p4$tee$1@mint.tarantella.com...
> Hi Escape 27,
>
> Thanks for your reply.
> First I tried in array manager to change DNS Name, second I have installed
> enhancement module on w2k server. But still I facing same CDM problem. In
> w2k server \"C:\Program Files \Tarantella \Enhancement Module\ttatdm.exe\"
> I seen this error \"C:\Add device failed with ERROR_BAD_NETPATH\".
>
> F.Y.I. I am not created Domain here because I have Static IP and I want to
> access thought simple Internet.
>
> help is appreciate.
>
>
> Thanks,
>
> Rachana Salavi
>
>
> Escape 27 wrote:
>
>> I assume that when you say eth1 is \"static IP\", you meant this one
> connects
>> to the internet.
>
>> What you need to do are:
>> - change the external DNS name in Tarantella to use the hostname of your
>> eth1 interface
>> - install the enhancement module on your W2K server
>> - enable Client Drive Mapping in array manager
>
>> All users will access the Tarantella server using the hostname of eth1
>
>> Hope this helps.
>
>
>
>> \"Rachana Salavi \" <rachana_salavi@yahoo.com> wrote in message
>> news:cs8fl4$bna$1@mint.tarantella.com...
>> > Hi all,
>> >
>> > Here I have installed RH9 and Tarantella 3.40. and I have 2 network
>> > card.
>> > First one is eth0 is for LAN and second is for static IP i.e eth1. my
>> > application server is win2k and I can access application easily. Now my
>> > problem is I want use client drive mapping here to save users work and
>> > Client printing for print the reports. Can anyone help how to do that ?
>> >
>> > Thanks Regards,
>> >
>> > Rachana.
>> >
>> >
>
>
>
>
>
Hi Esc 27,
Thanks again,
I have made changes as per your instructions.
Problem not yet solve. Now new message I seen in ttatdm "13:41:01
:00000016:Administrator :Failed to create server channel"
Prining from tarantella is priority for me. I am seen printer has been
create session wise in Win2k server, even as per TTA document I created
LPR port. But here I given eth1 IP address (i.e. my static IP address ) in
providing lpd field. and name of printer is tta_printer.
Is it correct to give static IP address for LPR port ?.
Still I am in same problem kindly please help me.
Regards
Rachana.
Escape 27 wrote:
> Try enabling the WINS server in Array Manager and add it to your W2K server.
> "Rachana" <rachana_salavi@yahoo.com> wrote in message
> news:csg8p4$tee$1@mint.tarantella.com...
> > Hi Escape 27,
> >
> > Thanks for your reply.
> > First I tried in array manager to change DNS Name, second I have installed
> > enhancement module on w2k server. But still I facing same CDM problem. In
> > w2k server \"C:\Program Files \Tarantella \Enhancement Module\ttatdm.exe\"
> > I seen this error \"C:\Add device failed with ERROR_BAD_NETPATH\".
> >
> > F.Y.I. I am not created Domain here because I have Static IP and I want to
> > access thought simple Internet.
> >
> > help is appreciate.
> >
> >
> > Thanks,
> >
> > Rachana Salavi
> >
> >
> > Escape 27 wrote:
> >
> >> I assume that when you say eth1 is \"static IP\", you meant this one
> > connects
> >> to the internet.
> >
> >> What you need to do are:
> >> - change the external DNS name in Tarantella to use the hostname of your
> >> eth1 interface
> >> - install the enhancement module on your W2K server
> >> - enable Client Drive Mapping in array manager
> >
> >> All users will access the Tarantella server using the hostname of eth1
> >
> >> Hope this helps.
> >
> >
> >
> >> \"Rachana Salavi \" <rachana_salavi@yahoo.com> wrote in message
> >> news:cs8fl4$bna$1@mint.tarantella.com...
> >> > Hi all,
> >> >
> >> > Here I have installed RH9 and Tarantella 3.40. and I have 2 network
> >> > card.
> >> > First one is eth0 is for LAN and second is for static IP i.e eth1. my
> >> > application server is win2k and I can access application easily. Now my
> >> > problem is I want use client drive mapping here to save users work and
> >> > Client printing for print the reports. Can anyone help how to do that ?
> >> >
> >> > Thanks Regards,
> >> >
> >> > Rachana.
> >> >
> >> >
> >
> >
> >
> >
> >
Rachana,
Can you describe your network architecture again? How many NICs do you have
on the Tarantella server? What's the name(s) and IP address(es)? How many
NICs do you have on your W2K server? Name(s) and IP address(es)?
"Rachana" <rachana_salavi@yahoo.com> wrote in message
news:csigv7$2kn$1@mint.tarantella.com...
> Hi Esc 27,
>
> Thanks again,
> I have made changes as per your instructions.
> Problem not yet solve. Now new message I seen in ttatdm "13:41:01
> :00000016:Administrator :Failed to create server channel"
>
> Prining from tarantella is priority for me. I am seen printer has been
> create session wise in Win2k server, even as per TTA document I created
> LPR port. But here I given eth1 IP address (i.e. my static IP address ) in
> providing lpd field. and name of printer is tta_printer.
> Is it correct to give static IP address for LPR port ?.
>
> Still I am in same problem kindly please help me.
>
> Regards
>
> Rachana.
>
> Escape 27 wrote:
>
>> Try enabling the WINS server in Array Manager and add it to your W2K
>> server.
>
>
>> "Rachana" <rachana_salavi@yahoo.com> wrote in message
>> news:csg8p4$tee$1@mint.tarantella.com...
>> > Hi Escape 27,
>> >
>> > Thanks for your reply.
>> > First I tried in array manager to change DNS Name, second I have
>> > installed
>> > enhancement module on w2k server. But still I facing same CDM problem.
>> > In
>> > w2k server \"C:\Program Files \Tarantella \Enhancement
>> > Module\ttatdm.exe\"
>> > I seen this error \"C:\Add device failed with ERROR_BAD_NETPATH\".
>> >
>> > F.Y.I. I am not created Domain here because I have Static IP and I want
>> > to
>> > access thought simple Internet.
>> >
>> > help is appreciate.
>> >
>> >
>> > Thanks,
>> >
>> > Rachana Salavi
>> >
>> >
>> > Escape 27 wrote:
>> >
>> >> I assume that when you say eth1 is \"static IP\", you meant this one
>> > connects
>> >> to the internet.
>> >
>> >> What you need to do are:
>> >> - change the external DNS name in Tarantella to use the hostname of
>> >> your
>> >> eth1 interface
>> >> - install the enhancement module on your W2K server
>> >> - enable Client Drive Mapping in array manager
>> >
>> >> All users will access the Tarantella server using the hostname of eth1
>> >
>> >> Hope this helps.
>> >
>> >
>> >
>> >> \"Rachana Salavi \" <rachana_salavi@yahoo.com> wrote in message
>> >> news:cs8fl4$bna$1@mint.tarantella.com...
>> >> > Hi all,
>> >> >
>> >> > Here I have installed RH9 and Tarantella 3.40. and I have 2 network
>> >> > card.
>> >> > First one is eth0 is for LAN and second is for static IP i.e eth1.
>> >> > my
>> >> > application server is win2k and I can access application easily. Now
>> >> > my
>> >> > problem is I want use client drive mapping here to save users work
>> >> > and
>> >> > Client printing for print the reports. Can anyone help how to do
>> >> > that ?
>> >> >
>> >> > Thanks Regards,
>> >> >
>> >> > Rachana.
>> >> >
>> >> >
>> >
>> >
>> >
>> >
>> >
>
>
>
>
>
Hi Esc 27,
Now my CDM problem has been solved. It is simple error from me.
I just changed default gateway of W2K server. I given IP address of eth0
of Linux/TTA server to W2K default gateway and my problem has solved.
Thanks to the tarantella support team for their guidance.
Rachana.
India Mumbai (Bombay)
Rachana Salavi wrote:
==============================================
> Hi all,
> Here I have installed RH9 and Tarantella 3.40. and I have 2 network card.
> First one is eth0 is for LAN and second is for static IP i.e eth1. my
> application server is win2k and I can access application easily. Now my
> problem is I want use client drive mapping here to save users work and
> Client printing for print the reports. Can anyone help how to do that ?
> Thanks Regards,
> Rachana.
Hi,
1. For Client Drive Mapping. you have to install Enhancement Module to
your Win2k Application Server. After Installing Enhancement Module you
have to give the following command on Tarantella Server.
go to cd /opt/tarantella/bin
$./tarantella cdm start
2. For Printing mostly you do't need to configure anything on App Server.
You have to Edit mime.conves and mime.types files which normally resides
in /etc/cups.
edit mime.convs and search for raw and uncomment the line. Same has to be
done in mime.types.
Hope This will help
Arun
Rachana Salavi wrote:
> Hi all,
> Here I have installed RH9 and Tarantella 3.40. and I have 2 network card.
> First one is eth0 is for LAN and second is for static IP i.e eth1. my
> application server is win2k and I can access application easily. Now my
> problem is I want use client drive mapping here to save users work and
> Client printing for print the reports. Can anyone help how to do that ?
> Thanks Regards,
> Rachana.
