Webless Installation
Hi,
How do I perform a webless installation( iWS on different machine than iAS)?
I have already installed the iWS on Server A, now I'm installating iAS on
Server B.
Which option do I use: express,typical or custom install?
And what should I response for the prompt:
"
iPlanet Application Server supports iPlanet Web Server 4.1.
Enter the FULL PATH of the Web Server Instance to be used, or enter 'cgi' if
you are using cgi.
For example: /usr/ns-home/https-my_web_server
"
I've tried entering the full path of iWS instance on server A:
/usr/iplanet/webserver/https-idev-web01.icomms.com.my
But it says "PATH not found".
Thanks,
Azrai
[753 byte] By [
709134] at [2007-11-25 4:51:02]

Hi,
For a webless installation, you must not install the webconnector in the
iAS. I personally recomend you to use the custom installation for the best. On
solaris, when you select the option to install the iPlanet Application Server(I
think, Option 4), you should see a "web connector" option, which you must not
select.
Also, you must install the same (./setup of iAS) in the system where you
have installed iWS and install only the "web connector" option.
The common problem is that, you may not be able to view the iAS from iWS
system or vice versa. The solution is to check if both the systems are mapped in
the /etc/host file, a ping to the ip address or the fully qualified domain name
will help.
Please let me know if this helps.
Regards
Raj
Azrai Mohamad wrote:
> Hi,
>
> How do I perform a webless installation( iWS on different machine than iAS)?
> I have already installed the iWS on Server A, now I'm installating iAS on
> Server B.
> Which option do I use: express,typical or custom install?
> And what should I response for the prompt:
> "
> iPlanet Application Server supports iPlanet Web Server 4.1.
> Enter the FULL PATH of the Web Server Instance to be used, or enter 'cgi' if
> you are using cgi.
> For example: /usr/ns-home/https-my_web_server
>
> "
>
> I've tried entering the full path of iWS instance on server A:
> /usr/iplanet/webserver/https-idev-web01.icomms.com.my
>
> But it says "PATH not found".
>
> Thanks,
>
> Azrai
Hi,
You can use either typical or custom installation. But you need to deselect
webserver installation. Default is takes all. I would reccomond you to install
typical installation, if you are not very sure what to install and what not to
install. Custom installation is better if you know the components and their
work.
Azrai Mohamad wrote:
> Hi,
>
> How do I perform a webless installation( iWS on different machine than iAS)?
> I have already installed the iWS on Server A, now I'm installating iAS on
> Server B.
> Which option do I use: express,typical or custom install?
> And what should I response for the prompt:
> "
> iPlanet Application Server supports iPlanet Web Server 4.1.
> Enter the FULL PATH of the Web Server Instance to be used, or enter 'cgi' if
> you are using cgi.
> For example: /usr/ns-home/https-my_web_server
>
> "
>
> I've tried entering the full path of iWS instance on server A:
> /usr/iplanet/webserver/https-idev-web01.icomms.com.my
>
> But it says "PATH not found".
>
> Thanks,
>
> Azrai
--
thanks.
parsu
I see a couple other people have already answered this, but let me add a couple of things:
First, detailed instructions for doing webless installs can be found in Appendix A of the install guide. But the previous posts are correct: just deselect components other than iPlanet Servers and then the webconnector on the detail screen. If you do this you will never be prompted for the webserver installation screen.
Second, the TestDrive installer does not support webless installs. I mention this because several people have posted this question before and it turns out that they were using the TestDrive version.
David
Hi all,
I've got it working.
Thanks everyone!
Azrai
"Azrai Mohamad" <azrai@softhome.net> wrote in message
news:9snei8$8sg2@ripley.netscape.com...
> Hi,
>
> How do I perform a webless installation( iWS on different machine than
iAS)?
> I have already installed the iWS on Server A, now I'm installating iAS on
> Server B.
> Which option do I use: express,typical or custom install?
> And what should I response for the prompt:
> "
> iPlanet Application Server supports iPlanet Web Server 4.1.
> Enter the FULL PATH of the Web Server Instance to be used, or enter 'cgi'
if
> you are using cgi.
> For example: /usr/ns-home/https-my_web_server
>
> "
>
> I've tried entering the full path of iWS instance on server A:
> /usr/iplanet/webserver/https-idev-web01.icomms.com.my
>
> But it says "PATH not found".
>
> Thanks,
>
>
>
> Azrai
>
>
>
Guest at 2007-6-30 21:46:00 >
