Hi all,We've just set up a Microsoft VPN internally on Windows 2003 SBS, and we need to allow access using the firewall.I have gone into the Port Forwarding page and set them to the correct path, and also I have gone into the Adaptive Firewall Utility, and enabled the PPTP and also set the custom ...

Help.....does anyone know the use for the 34 pin connector at J13 on the Chimera card? It looks like an IDE connector, or even a floppy drive connector. I am reluctant to use it until I know it's purpose. Also, where can I pick up a user's manual for the card? Thanks in advance.

I looked on sunsolve and it appears that the 4GB emulex and qlogic cards are supported on the netra 1290. Is there any roadmap for these cards being supported on the 1290?

Hi, I have an A1000 Storedge Raid, currently fully populated with 36G disks. I thought this was the maximum disk size the chasis would take, however upon reading the hardware specification of the A1000 at: http://sunsolve.sun.com/handbook_private/Systems/A1000/spec.htmlIt states I can run 73.4G ...

Is it possible to completely wipe a Cobalt RaQ 550 and reinstall the Operating System? If so, how can I do this?

Hi all, I磎 installing a new Secure App Switch model N1400 and is my first time with that hardware. Somebody help me about physical connection in Vlan networks.Some documents about configuration.Version of software is 3.1I configured switch but doesn磘 work.Need help..!!!THANK YOU ...

HiI was looking for this in the documentation but found .... nothing.i want to reset t3+ storage array to default settings.How to do it?RegardsPaul

I have used my Sun 90W10 monitor for 6-7 years and I have been very pleased with it. Now I have noticed that there is several lines that go horizontaly across the monitor(not Trinitron damper wires). Actually these lines are composition of red-green-blue lines and when I adjusts color ...

I have a D1000 storage array with 12 slots, 3 dummys and 9 disks.Each of the disks are of this variety: 18.2GB - 10000 RPM, Disk .I would like to know if I could add a 73.GB or 134GB one into the spare slots?Anyone with an idea on this old equipment, please let me ...

I have a D1000, which passes all of it's diagnostics, and an Ultra-80 which does the same.HOWEVER, when it comes to getting them to talk, it's a failure, and I need to ask why.Sun U 80 with a dual-differential PCI card (The SYMBIOS one)Diff cable to the D1000Diff cable from OUT-A to ...

I have a customer who wants to use a USB external DVD drive to upgrade software a lot of Sunblade 150 workstations. The machines have internal CDROMs but he doesn't want to change all for DVDs. He wants to know if the addonics AEPDVRW888UM is compatible with these machines ie will it work on ...

The Sun Multithreaded 10GbE Networking Card does not have drivers available on Sun's site for either Solaris or Linux.The user manual is ...

When installing SCA6000 drivers on a RHEL4 update 5, I get the following error:Checking Kernel Info...System Kernel = 2.6.9-55.ELsmpKernel Version: 2.6.9, Build Number: 55, Kernel type: ELsmpDistribution redhat2.6.9-55.ELsmp foundKernel build number 55 requires additional driver...Error: cannot ...

My Raq 550 has an email glitch every now and then the server will continue to accept incoming mail but clients can't access through POP to check their mail. It won't restart with the Admin GUI, I try to SSH in and use the /etc/rc.d/init.d/inet restart/ command but it won't restart the email ...

Hi,I have to replace the SCC card on a sunfire V250 running solaris8.Does anybody know how to modify the host id and mac address on this card ? This would avoid a long licensing process.Tx

Don't know if this is a right place, if it's not, please direct me, thanks!I had a SPARC Ultra 10 machine running under Solaris 10, it wasrunning for couple months. Recently when I reboot it, it was hang at"Use is subject to license terms."I press STOP+A to bring me to ok prompt, then type ...

I got this USB wirelss adapter,Linksys WUSB11Wireless USB Network AdapterIs this Solaris friendly? If not, which brand (wireless PCI/usb cards) I should try here?Thanks

I want to know which java API is used for the above said purpose and any other sugestion regarding the above topic.I want to make the software for interfacing the human thermometer to the PC. my email address is sanaullah_qureshi@hotmail.com

Hello,I am searching it but I did not found on google and sunsolve documentatio.Some idea?Thanks.Alberto

I have a Sun UltraSCSI drive enclosure, P/N 599-2326-01I would like to know the maximum output amperage ratings for its +5 and +12 volt power supply. I cannot find this information anywhere. Can you help me? Thanks!

Hi all,How do i find out the model of the scsi card for E3500?

After downloading Sun XVR-500 Graphics Accelerator Driver with Sun Download Manager, it is impossible to extract the file. The download manager shows a file conflict error. Trying to extract the zip-file with winzip, it shows a problem with extracting the install script. There is a problem ...

Hi there, I have an old ultra 2 I want to install on with a type 6 keyboard. It seem to recognize the keyboard however when I try to hit stop to get into open boot it just continues on its merry way and tries to net boot, of course this fails... How do I get it to let me into open boot? Do I ...

Hello,I am getting a white screen after boot up. All I can do is writing down characters. Nothing else.I am using Sunfire V240 with Solaris 8 V2/04Thanks will

Im looking for a DVD-drive compatible with Sun E3500. The model is called 1711. What Sun-retailer could provide these? RegardsOlov

I'm trying to install a GDM-5010PT connected to a PC. When I use the high resolutions, like 1024/768 and higher, the fonts apears with a dark line near the font, i mean as all dark lines has somethink like a dark shadow on the right, 1 or two milimetes away from the original lines. I've tried ...

Hello all, I have created on a sun storedge se 3310 an RAID 5 array matrix with 4 disks (73 GB) for logical drive and a 5th disk (73 GB) for local spare. It seems that is taking a long time to be created and i can not see any activity on the servers leds.Can anyone tell me how long it should ...

hello.I'm new in sun solaris....yesterday i have download solaris 10...i came from windows ....i try to install solaris in my pc ...but during installation process, i receved error message: 1)sistem time is not valid2)error memory becouse , memory is interleaved..what can i do for resolve ...

I have come into control of a Cobalt CacheRaq 4, but I am unable to reset the password by holding down the reset button with a paper clip. If I hold down the button for any length of time, it still does not signal that the password has been reset. Does anyone know why this might be? Or how to ...

Just baught a C2 autoloader to connect to a V440. No Ultra-3 controller purchased. Will it connect to V440's Ultra-4 connector in the back OK? Any known issues doing this?

Can anyone help?I am trying to get a Cobalt RaQ 550 up and running for a project.As soon as power is applied the system fault spanner is lit. Upon power on no text is displayed on the LCD screen.Any ideas?Thanks

Hi.Recently I decided to buy a notebook, and due to there is no point to play games on that "low-life-battery" thing, thus I was wondering if there are any sort of Sun notebooks?Or at least any notebook which can support Solaris with all the hardware working perfectly strait out of the ...

Somebody know what mean "GA Date"?Also when is EoL and EoS of SFv240 servers?

I was wondering if anyone had found a DVD writer that will work with the Sun Fire V440. I would like an internal drive if possible but an external device would also be acceptable.

Hello,I am running redhat kernel 2.6.9-34.ELsmp. I just installed the Sun 10 Gigabit Ethernet Adpater and the driver to go with it. I ran the following commands per the installation instructions:# depmod - returned prompt with no errors# modprobe ixge - returned prompt with no errors# lsmod - ...

How can i use a swiss german keymap on a blade 100 with a non-sun keyboard?

Hi,I have a Sun Ray 1 purchased second hand. I am currently in the process of installing the server software onto my CentOS linux distro. Just to see what happened if i turned the Sun Ray on without the server yet running, it got to the egg timer screen and never gets past there however long ...

Hi,For some time, I have been trying to get a .htaccess file up and running on a Cobalt RaQ 550. The .htaccess file contains a load of commands for mod_rewrite. However, the server keeps on returning error 500 (Internal Server Error). Is there something that I should do differently from the ...

Can anyone help me avoiding Sun Cabinet FrameManager service LED on Sun Fire 4900 Rack.

I have Cobalt QUBE 3 and I update manually from sun.cobalt website. Then I update patch "Qube3 EOL Update 4.0.1" it's process finish and reboot the system.After Rebooting, I can't open Cobalt console via Web browser ( http://10.100.200.221:444/login.php) and shown the msg.Fatal error: Call to ...

Hello,The NetVault / Backbone Software Version 7.4 cannot see the C2 Autoloader . . . It just says No Library Found.Can anyone help with this? Thank you,

sunfire v 880input & out put is set to ttyait shows total startup on serial a/b connector& stops without booting to os atok from hyperterminal it is not taking any commandso how can i go ahead and can give any command to server

I have a 420R server that is being setup for multiboot to both Solaris2.5.1 and 2.6. Unfortunately the installation of those OS's onto a 80/420R requires the use of "Solaris Operating Environment CD", aka "CD0" - PN: 704-7076-10. I really need to get this CD and am willing to pay for it or a ...

FOr some reason my raq 4r will not display the virtual sites in the control panel.. instead, i get "The server encountered an internal error or misconfiguration and was unable to complete your request."Also, when sending and receiving email, i get this error. "Task 'mydomain.com - Receiving' ...

What is the purpose of the /SP/console? When I do:cd /SP/consolestartit asks me if I want to "Are you sure you want to start /SP/console (y/n)? y".I hit "y" and it says "To stop, hit ESC ("Then it just hangs. I can't type anything, and nothing else ever comes up.The only thing I can do is hit ...

I just installed a C2 AutoLoarder and I plan on using it to do system backups daily. I am having problems unloading the tape from the drive via a SCSI/mt command. Does anyone know the scsi commands to unload the tape drive and load the next tape once backup is complete?Curent Solaris Version: ...

Does anyone know if it is possible to put PXES (a linux thin client distro) onto a SunRay terminal 1? I'd like to use the 2X ThingClientServer PXES edition if possible.

I connect a USB barcode scanner to Blade 1500 that have attached a USB keyboard and mouse.The OS warn that "Multiple keyboards not supported"But if I connect the USB barcode scanner,and don't connect the USB keyboard and mouse.The USB barcode scanner work well.If I plug out the USB barcode ...

I seem to have lost my pre-existing serial/console cable.Any ideas on where I can buy one from ? It needs to be 9pin at the x86 workstation end.

Is it possible to run a SunPCI card on an x86 box ?Why ? Simply for the point of doing so.Yes, i agree that software virtualisation such as vmware, or virtual server, would be a better option, but i'm curious.