I am connected to my V120 and the terminal has the LOM> prompt when I type console I get "Console not shared" how do I get around this to the ok console so that I can set up this server?Thanks

I am getting a situation where I can not get by my E4500 trying to boot to the network or at least trying to autodetect it. It just keeps looping with the messages below:Setting up Network Link and Speed.Using Onboard Transceiver - Timeout waiting for AutoNegotiation Status to be ...

Recently received a V20z server..pretty slick thus far, using it with our own version of redhat. Thus far it is great..but this thing is incredibly loud. I was told in passing that the fans could be adjusted to a lower speed via the bios and that they (the fans) dont all need to be whinning ...

I get the folowing errors on my Sunfire V210I can't get my OS to start.Nor can I get to the ok prompt.This what my showplatform doessc> showplatformSUNW,Sun-Fire-v210Domain Status S0OS Stoppedsc>Please helpSC Alert: VOLTAGE_SENSOR @ MB.P0.V_CORE has exceeded low warning threshold.SC ...

Hi,I have been trying to get a v210 connected to a terminal server (Micro Annex XL) using the Serial Mgt RJ-45 connection via a Cat5 cable with no luck!Can you please provide me with the correct preocdure to get the V210 to give me a 'sc>' prompt! I have tried using all different types of ...

I have 6 V480's in my environment, each using the on-board CE interface. In the past 6 months, each server (one per month) has done the following:Monitoring tools report that the server is down. The server is not accessible via ssh and is not pingable from it's redundant pair (which makes ...

I just started a V210 server and connected USB-keyboard and mouse, but it seems that the USB-drivers are not correctly installed in the preconfigured Solaris 9 package.So there are no contact with the server from the keyboard.This is leading to that the CDE can not be started since theXserver ...

E3000 SunOS 5.6I get the following msg in /var/adm/messages:WARNING: status 'fail' for '/<a href="mailto:fhc&#64;e" target="_blank">fhc@e</a>,f8800000/<a href="mailto:flashprom&#64;0" target="_blank">flashprom@0</a>,0' on board 7doing a prtdiag -v ...

Before I call Sun, I thought I'd ask here:I have a brand new SunFire v20z that I am trying to manage remotely. I had no problem getting the service processor set up and connecting to it, and I was able to access it for several days. It worked fine.Then I went away for a few days, and when I ...

Hello all - I have an odd issue with a Netra after a recent power cycle. The terminal connection to the LOM port receives error/notification, etc, but I can not issue any commands to the port. I've patched to ver 3.14 of the LOM firmaware after a reinstall of the LOM OS packages. The port is ...

Here is some output <div class="pre"><pre>SUNW,UltraSPARC-III: [ID 748570 kern.warning] WARNING: [AFT1] Uncorrectable system bus (UE) Event detected by CPU0 Privileged Data Access at TL>0, errID 0x000008ed.756b4980AFSR 0x00100004<PRIV,UE>.00000137 AFAR ...

I work at an ISP, we've just had a customer bring in 3 sunfire v240's. They don't have any video out at the moment, but they insist that they want them to have graphics cards and to be reachable on our KVM. Anyhow, they are purchasing graphics cards I'm assuming X3768A. Our KVM is a Raritan ...

I am trying to gain serial access to my netra X1. I am using a null modem cable in LOM A and Tera Term on my PC. When I turn on the server, I see nothing in the terminal.ThanksTroy<a href="mailto:tdknabe&#64;wou.edu" target="_blank">tdknabe@wou.edu</a> I went through a ...

This alarm comes up every 15 minute on my V210 server:<b>Dec 9 16:13:32 pp1 rmclomv: [ID 211032 kern.error] PSU @ PS0 has FAULTED</b>We tried to replace the Power unit but this appeared again a couple of weeks later. We are running Solaris 9 on this machine .Any ideas ...

Hello.I've just added 2 CPU and 2 Go of memory to a Netra 1400/1405 Server (already working with 2 CPU and 2 Go). I've experienced some panic.So, I decided to swap CPU. The problem is still there.It's a 4 cpu server, so I removed CPU0. The problem still occur.Have someone experienced and ...

Hello,I have some V210 servers and one of it send me this messages : Message:"MAJOR: PSU @ PS0 has FAULTED."If I look the "showenvironment" on the RSC I have this :--Power Supply Indicators: --SupplyActive Service OK-to-Remove--PS0OFFONOFF Power Supplies: Supply Status ...

I wonder if anyone out there has any suggestions as to what I might do to solve this slightly sticky problem.cssd: The process "cs00.sh has been exited with retcode#256last message repeated 79 timesis displayed on the consoleWhen telnet connection attempt made to the box it allows login ...

Has anyone determined what could cause the following warning messages to display? Everything is running fine or appears to be. Prtdiag shows no problems; netstat -i shows no errors, collisions, etc. Here are the messages: Feb 9 10:06:27 proddb1 pcisch: [ID 100033 kern.info]Feb 9 ...

Hello,I've got a Sun V120. Today the fault light is on.From the lom I find : +1d+2h29m25s supply rail 4 FAULT: failed +1d+2h29m25s fault led state - ON +11d+8h32m44s supply rail 4 recoveredBut the light is still on, Why it is not off?Thanks

I have a 240 here that will only power up to the ALOM. I am connected through the serial port via hyperterm on a windows box. If I power on either way the power light does not come on on the front of the server. Issuing the poweron command from the sc prompt will spin the fans and disks but I ...

hi everybody,I am getting a problem with internal tape drive.My Netra 20 Server having Solaris 8 in it is online and is busy, and I am unable to shutdown. When I tried to take a backup in tape, error message displayed"No such Devices or Address"I went to /dev/rmt directory and deleted ...

I have several machines that are giving the following from prtdiag -v:Current sensors: -Location Sensor CurrentLoLoWarn HiWarnHiStatus -PS0FF_OC - ----okayPS0FF_NR - ----failedI have loaded ALOM 1.5.3.Other info:SunOS eiecimg 5.9 Generic_112233-11 sun4u sparc SUNW,Sun-Fire-V250OBP 4.11.4 ...

I am trying to share a StorEdge 3310 between a Sun Enterprise 220R and a Sun Fire 280R. In order to share the disk via Solaris9 SVM disk sets, the disks needs to be addressed similarly on both hosts ( must have the same c#t#d# ).I have installed Solaris9 on both, with 1 internal disks, 1 ...

Hi Guru's,I want to setup an Sun Cluster for testing purposes and have the following hardware to use : - 2xNetra t1 105 1GB/2x18GB/1Gigabit Adapter (for Interconnect)- Netra st d130 Storage (3x18GB). (just one)When I try to setup the d130 I get an SCSI-Error.I have changed the ...

I've been having serious problems with our four Sunfire b1600's. Wondering if anyone else out there is seeing it. We have four of these chasis with anywhere from 5 to 12 blades in use.We also have spare unused blades in each chasis. When we go to usethe spare blades, install os and boot up, ...

Hi everbody,has anyone of you experienced this and helps me understand what is going on?The ONLY powersupply of our Sun Fire V210 seems to be faulted (but not failed!). LEDs indicate that, but everything still works. I get this error message on the console every 15 minutes: Apr 4 13:01:05 loop ...

Hi,I'm new here and did a quick search, but... I can't find the stuff I'm looking for.I have a Sunfire v100 and the hardware light on the front of the box is a solid amber. Does anyone here know where to download the tools to test the system for possible failures, or exactly which logs to ...

Hi All,I have one 280R server. How to recover 280R LOM password?Regrads,Tim

Dear all expert,I am the beginner and I bought a Sun E3500 server but i can't boot it up. I placed a solaris 10 installation in DVD-ROM, how can I boot up the system from that DVD and install it?While i boot up the system (diag) , i saw a white screen and showNo ONLINE status! Check H/W and ...

Good Morning, I received a "(ID 796976 kern.notice) System booting after fatal error FATAL Sys Hardware" in my message log. The server booted itself only once. Can anyone tell me what problem this relates to?Thanx - Eric

Hi to all!can anyone provide me some troubleshooting procedure regarding my problem below...im trying to install a brand new SEAGATE ST373453LC to my netra t1 105, but i cant get rid ot the message below...the new scsi drive is the only scsi drive that will be installed in my new system....by ...

Is it me or prtdiag -v no longer displays temp. info.Currently I only see Temperature sensors:LocationSensor StatusMB/P0 T_CORE okayMB/P1 T_CORE okayMB T_ENC okayPS0FF_OT okayPS1FF_OT okayAnd I believe it used to display the actual temperature...TIA... ...

Hello All,I'd like to install a better video card on a v20z we have. Does anyone know of a good 3d (prefer nvidia) video card that will fit in the v20z? Thanks.--ryan

We have a new V210 with 2x1.3GHz CPU, 2GB RAM and 2x73GB HDD. It came from Sun's rental company with Solaris 9 installed, as requested, and the following partitions on disk 0:0 - root 4GB1 - swap 4GB3 - /var 4GB4 - unused5 - unused6 - unused7 - /export/home 56GBOur aim is to mirror root, swap, ...

Hello,We're installing 5 V210 servers through jumpstart, but there is one server where the disks are on a different controller, at least so it seems. With 4 of the servers, the disks are on c1t0d0 and c1t1d0, but the 5th is showing his disks on c0t0d0 and c0t1d0. This is quite annoying for ...

Hello,My DVD device is not seen by solaris.Seen by probe-scsi-all at the O.K. prompt.OK boot cdrom worksAfter booting solaris, I put a CD on the device, but the volmgt doesn't show nothing. volmgt stop and volmgt start, but nothing in /cdromMount manually doesn't work.No link in /dev/dskNor ...

Hello every body,when i try to boot the system i have the error "Fcode map-in doesn't match decoded register type" Data Access error, and then still at open boot mode.i have this error after the installation of the driver SCSI 115667. my system work with two disc, and i configure the ...

Do the V890 and V490 platforms support RSC cards, or ALOM+ cards?According to the Sun System Handbook the V890 IO board has a slot for an ALOM+ card. But...Why can a purchase both RSC cards and ALOM+ cards when only ALOM+ cards should only technically fit (according to the IO board layout)? ...

Can any one please answer this can i boot the 450 in 32 bit if i am running solaris 8 .any help will be very helpfull. Thanks in advance .

All, I have a SunFire V880 configured with Solaris 8, Veritas Volume Manager 3.5 and a 2nd PCI I/O Controller using DMP on 12 Interal 73GBFCAL Hard Drives in a 5 Column Stripe/Mirror with 2 OS Drives/mirrored. Im getting the following errors on my Physcial Devices reported from iostat -En . ...

Hello, I am new to Sun hardware, but have spent many many hours using the Solaris O/S. I have recently been asked to set up a lab for my team and was given a Sun 5500 as my first project. They have given me complete control to do whatever I want with it, but I am having trouble just getting ...

I've just spent a week getting all our Sun boxen hooked up to a private network for the RSC/SC ports and redirecting console I/O to these RSC ports. All appeared to be working fine - telnet into the RSC, halt, diddle the OBP, printenv, reboot - true console access via this RSC card.Then we ...

I'm having problem with seagate ST318203LC not showing up as 18.2GB capacity on Sun Enterprise 250.. I ran the format command and print the partition table and this is the result:AVAILABLE DISK SELECTIONS:0. c0t0d0 <SUN9.0G cyl 4924 alt 2 hd 27 sec 133> /<a ...

Can any Please answer this question as I have an E 450 and that has a backplane installed that can hold 20 Disk what is the MAX disk Size that I can buy for this servers is 36, 72 or 146 GB or larger then that .Any help will be appreciated .thanks in advance

Hello,Since few days, I have A SunFire V880 which stops alone.There is the last message written in /var/adm/messages before the reboot:todds1287: [ID 429363 kern.warning] WARNING: Power button is pressed, powering down the system!But, nobody pressed on the button.Did somebody already ...

This week, our E-4500 server restarted 2 times automaticlly. At first time,I can't find any error in /var/adm/messagesbut I found some infomation in "prtdiag -v"Most recent AC Power Failure:=============================Fri Sep 26 01:59:24 2005Power Supplies:SupplyStatus ...

OK, I'm stumped. I've tried everything I can think of up to and including replacing CPU's and I can't figure out what's going on.I have an Ultra E450 with 4 UltraSparc II CPU's... there is no O/S installed - haven't even been able to get there...Here's the VERY repeatable problem:1. A ...

My E450 Firmware and probably OpenBoot are way out of date...I don't have a running system so I can create a bootable disk with the flash images on it....Is there anyway to create a bootable flash image on a floppy without a running box?My OpenBoot is 3.7 and everything reported from .version ...

Hi all,Can you tell me how to check the CPU/memory usage from the command line.Is there any command for that.David

I am having a problem with a SunFire 280R Server. The server reboots at random times by itself. I have two other 280Rs that do not do this. We went ahead and upgraded the OS to Solaris 10 and still have the same problem. All that this currently on it is the OS.Does anyone know where I can get ...