195 byte By
grayfoxa at 2007-11-27 10:08:07
Would a pci video card from a pc or mac be compatible with a sun enterprise 220R server ?.(Im assuming the mac one probably is since the mac uses open firmware and so does the sun.)
5421 byte By
elbowza at 2007-11-27 10:18:46
Hello all:I am using an Ultra5 system with OBP 3.25.3, Solaris 8 [10/01]. I have a 160GB Seagate ST3160812A disk drive that I am trying to use as a second drive (primary slave).I have installed the drive on the primary channel as a slave and performed boot -r. The /dev and /devices directories ...
Hi everyone. I want to learn Solaris and I just happened to find somene who was giving away a like-new U5 workstation. My problem is that it does not have a keyboard or mouse and it does not have USB ports although it does have a serial and something that looks like a ps/2 port but has more pins. I ...
611 byte By
grayfoxa at 2007-11-27 10:38:30
Hey this is my first sun server and im having a bit of a problem :/.I can't seem to get any output in hyperterminal from this sun 220R from any of the serial ports on the back.Just incase im doing something Very noob heres a picture of how I have it hooked up.It goes from the usb to serial ...
<p>I have a V240 (2x1.5ghz) and I am trying to connect to it using the hyper terminal on Windows XP, but all I get is unrecognizable characters. I have my port set to COM 1 ( using a Cisco crossover cable), 9600-8-N-1 , and it connects, but the just spits out gibberish.</p>
16076 byte By
A.Skwara at 2007-11-27 10:49:24
Hello.For some time now, on two of my servers, the yellow Service LED is on. The servers are working fine, though.In the ALOM logs, I also don't find anything useful:winds01_sc> showlogs -vNOV 24 17:43:18 winds01: 00040029: "Host system has shut down."NOV 24 17:57:38 winds01: 0000000a: "Power ...
1088 byte By
kansukeea at 2007-11-27 10:52:44
Got this free U5 and just today I received a keyboard and mouse I had bought on eBay. So I went ahead and tried to install and didn't even know how to boot from CD (I am totally new to Sun hardware). So after googling a bit I have gotten as far as the point where after booting from CD and filling ...
<p>See above.</p>
Hi All, I have experience installing x86 based system Linux and Solaris. I never installed Solaris on Sun servers, so I decided to explore Solaris on sun machines, I have purchased from Ebay a Sunfire V100 server with 512 MB RAM, CD Rom etc. Now I have the sun box without OS installed or unknown if ...
42470 byte By
golfballa at 2007-11-27 11:15:31
Hello not too experienced with E2900, we have a problem, it will not bootAny help or advice how to progress would be appreciated also any indication as to what the problem may be.SB2 and SB4 have been disabled manually.Thanks in advanceConsole output LOMlom>lom>poweron/N0/PS0: powered on Fri Jul 20 ...
293 byte By
Aijaza at 2007-11-27 11:21:05
<p>hello there.</p><p>I have an ultra 10 with the following specs:</p><p>type:SUNW,ULTRA-5_10;sparc;sun4u</p><p>I would like to add more RAM to the system. Is there any documentation out there that details the various steps needed?</p><p>Lookin to hear from you,</p><p>Regards,</p><p>Aijaz</p>
<p>Hi </p><p> Does anyone have information on the Service processor (ilom or the Alom card) on the sun fire v880 and E450 servers.....</p><p> If someone can help it would be great......</p>
<p>I have the motherboard listed above. Can anyone tell me what systems this was used in and if it had any other part#'s associated with it?</p>
Hi all,We've just set up a Microsoft VPN internally on Windows 2003 SBS, and we need to allow access using the firewall.I have gone into the Port Forwarding page and set them to the correct path, and also I have gone into the Adaptive Firewall Utility, and enabled the PPTP and also set the custom ...
361 byte By
mpecha at 2007-11-27 11:41:14
hi,Sun Fire 280RForget password for RSC, No OS1. turn off server on which password is unknown. Plug cable to port A2. plug cable to port B on the second Sun Fire 280R. Exec 'tip hardwire'3. power up server. wait for blinking lamp and double press power button4. no console in the 'tip'.Whats ...
<p>This is an Warning message that got on the Embedded Lights Out manager of an X2200M2 server:</p><p>"DIMM 4 has single-bit error"</p><p>I also have a orange flashing light on front of the server.</p><p>What does it mean exactly ?</p>
<p>Does anyone know if the V215 server will support an XVR-2500 Graphics Card?</p><p>Thanks,</p><p>Joel Silverstein</p>
Hi All,Coming monday I get my Ultra 20 M2 (jay!) and I was wondering what kind of things people have tried upgrading/modifying. From the customer stories at the sun page I already saw that people have had great success with various nvidia graphics cards! I am specifically curious about* Other AM2 ...
<p>anyone ever see this during a setup?</p><p>WARNING: Hardware address cc:cc:cc:dd:dd:dd trying to be our address 192.168.10.10</p><p>I'm setting up a T2000 and going through newtwork setup, but on boot up I get that error/warning.</p><p>any thoughts?</p>
<p>Does anyone know the disk drive height limitation of Sun Ultra model 140E? What are the disk drive interfaces supported by it? I'm having a hard time looking for documents indicating Sun Ultra 1 model 140E's specifications and limitations.</p>
<p>Does anyone know the disk drive height limitation for Sun Ultra 10? What are disk drive interfaces supported by it?</p>