Hi,Is it normal for the network ALOM on a T2000 to perform as ifI was using an acoustic 300BAUD connection? If it's not - howdo I change that behaviour?Cheers

Please need help.NETRA 440 with two 72 Gb HDD after installation of Solaris 9 after reboot can't found second disk HDD1. Under format also i have only first disk. When i change slot and move this disk to slot 3 or 4, system can recognise disk, but after boot again same problem.I try to put ...

Hi All Gurus,The Ultra 10 still boot from net and cdrom, but not from disk. I already reinstall the OS.Please help.Thanks.Andry

I am attempting to jumpstart Solaris 9 9/04 patch level Generic_118558-28 onto a brand new V490 that uses the 1.5Ghz USIV+ processor. The OBP level is 4.18.1.I am getting the error:krtld: load_exec: fail to expand cpu/$CPUkrtld: error during initial load/link phasepanic - boot: exitto64 ...

Hello,I have an Ultra 10 box with an extra video card inside. Everything was working fine, and then I got curious and decided to open it up to see what's inside. Now it won't start anymore. I turn the computer on, the fans start spinning, but nothing gets displayed on screen. I can hear the ...

I am running Sun Blade 100. I do not have access to system since the previous admin did not left anything. Is there any way to reset the password without logging into root account?

How I can get IP address from my new Sun Blade 2500? I want to install OS from network but I didn't know how I can get the IP from the machine. I'm newbie.

I'm trying to compile my rf driver (8139D chipset).I did install SWFgcc.But when i'm trying to make the rf module, it says that mac.h isn't available.So i did download it from the opensolaris project, and put it into the /usr/include/sys/ directory.But i got errors like:gem.h:170: error: ...

I installed Solaris 10 6/06 on an IBM Thinkcenter 8136 but NIC (Broadcom xtreme 5751 Gigabit) was not detected. I checked the HCL to determine availability and found a link to a driver provided by Broadcom.The installation of the driver is successful with a warning that says "devfsadm: driver ...

I have an E4500 that crashed today and when it came backup it wanted to run fsck on /opt.I read the messages file but i am not sure what it is telling me.Here is the error logs.Oct 13 16:36:03 myserver SUNW,UltraSPARC-II: [ID 632919 kern.warning] WARNING: [AFT1] WP event on CPU8, errID ...

What is the default root password for a Qube 3 running Cobalt Linux?

Hi,Windows decided today i can't use my ps/2 keyboard.My dad pulled out an old sun USB keyboard he had lying around.I was wondering if their were any drivers that would get thefunction buttons to workOn the bottom it says "Type 6 USB".if you can direct me to a good keymapper that will ...

we have 3310 HW/CTRL with 5x72HDD connecting to v880 server , when we check the size in the storage we find around 360 but from the format command we find the old setting which 4x72HDD=288Gb , i did reboot -- -r , but nothing change the size of the partition in the storages diffrent than what ...

Hi, first of all. Thanks for checking the post.My question is on some hardware architecture. More specifically why there has been no products in the public sector like this.Now, if you take 3 seperate systems, 2 of them running as servers, one connected to the internet (A) and one private (B), ...

Hello,I have a combo Ethernet/SCSI card which I am using under Windows XP. While the SCSI part is detected and working under XP, the Ethernet Card is not.I booted Linux to get a little more information about the device:03:00.0 Bridge: Sun Microsystems Computer Corp. EBUS (rev 01)03:00.1 ...

HiI've got at singel CPU SunBlade 1000(750Mhz) and thinking of upgrading to a 2-way system.Depends on what I find I'll just add another 750mhz CPU or two 900Mhz. It there a big difference in preformance between the 900Mhz non Cu and the 900Mhz Cu cpu?I just looked in the Sun System Handbook ...

Hi,I have problems booting up my Sun Netra 1280, cause SB0 has been flagged as disabled. Mon Oct 16 09:55:01 noname.example.com lom: Agent {/N0/SB0/P0} is CHS disabled.Mon Oct 16 09:55:01 noname.example.com lom: Agent {/N0/SB0/P1} is CHS disabled.Mon Oct 16 09:55:12 noname.example.com lom: ...

Hello everyone !!!I need some help with my SB1000.I've got a Sun Blade1000 workstation with two 750 MHz CPUs, 2GB RAM, two hard drives (18 and 36 gig), XVR-100 video and such...Recently i started seeing some weird behavior.The box reboots for no reason and there's nothing in the ...

hi,I have a blade 2000, but today I got a broblem. the system can't boot. when i power on it, after 4 beeps it power off automatically.

hi,I have power supply Astec AA22760 from SunFire V210 server. I want use it for "especially" power supply for universal use. Can anybody give me pinouts of all three connectors of this power supply?Thank you in advanceChris

Good afternoon,I see the forum has changed since I was on this last. I noticed that in the Other Sun Hardware the messages prior to March 2006 do not exist. If my brain is still working correctly, I recall reading that the SunPCI cards had problems with Windows XP SP2. The write of the post ...

Hi I wonder that DDR2-667 RAM support is availabke SUN server? if it is available, which server?The other question is, remote access support is available or not? if it is available , HOw? with SSL support Remote access? Which server support remote access by using SSL? if it is not available, by ...

Hi, I wonder that SUN storage is support iscsi connection. on SAN architecture, SUN storage use fiber channel connection, but if I want to use iscsi connection, in this case can I add this feature to SUN storage by adding extra card, or sowftware? is it possible or not?

I'm looking to upgrade from my old DLT7000 tape for my E4500 server. I don't want a tape library/robot, just a high-capacity single drive. Could I use a SDLT 600 tape drive without needing a high-speed board?Thanks,Harry

I saw this cable "APC 51061-6" available sale on some website. Is there anybody using it for your Sun workstation with a PC monitor now? Please let me know if the cable works fine.

Hi We have 3 v240 server running with 1 USparc IIIi@1002MHz / 4*512MB.Now i need to upgrade the RAM, can i use the second CPU slots to install additional RAM. with out populating the second CPU.since i have used all the 4 slots in the current CPU banks.Thanks Shan ...

2 Questions.- how can i tell if my X4100 is M2 or not so I can get the correct drivers, etc?- X4100 and X2100 w/ Windows Server 2003 does not recognize Control-Alt-Delete from Raritan DX216 KVM Console Workstation, but my HP, Dell and other Windows 2003 Servers do. Why won't the Sun X2100 and ...

While in OpenBoot prompt I need to obtain physical address (I have the virtual address). The reference says that this should be done via address pgmap?call... but my prom seems to not support this command because when I type 'address pgmap?' I receive 'pgmap? ?' ... so it seems my version ...

Hello,I'm wondering about some hardware details of the new V125s.According to sun.com website it ships with 1.0 Ghz UltraSPARC IIIi, will that one be approx. comparable to an older V210 with 1GHz UltraSPARC IIIi or are there more things to think about like the System clock frequency (on V210 ...

Hello,I want to upgrade server from subject line from one processor to dual processor. My question is: what modifications must be make on software? I have Sun Solaris 5.8, Veritas Netbackup, LUM Licence Server installed on this machine. Any help will be apreciated.

I just got a sun fire v120 with preinstalled solaris 9, I use serial port to connect to lom from my laptop. System prompts me for console user and password, anybody knows the default password for root user?

hi everybody. i'm sure this problem has a simple answer, but i can't find it...i recently bought an ultrasparc 10 on ebay and installed solaris 10 on it. this worked fine, but seeing as i only had a keyboard at that time and no mouse, i got bored with it quickly and decided to install gentoo. ...

I own a Sun Blade 2000, which I got off of eBay. I can get no useful video output from the Creator 3d (either series two or three) on four different monitors, one of which is a somewhat recent HP vs17. An old Micron gets nothing even when set to a resolution and sync rate which I know beyond a ...

All,I got E4500 which I was able to power on once. At that time in the middle of the POST the system turned off by itself. Last few lines of post are here:0,0>Board 0 SIMMs Test0,0>MP Memory SIMM Clear Test0,0>Memory Size is 10240Mbytes0,0>CPU MID 1 clearing 00000000.00004000 to ...

We're the second owner of a SunFire B1600. We bought it from an auction, so who knows who the previous owner was, and if they even remember the password to get into the internal switch. I've been poking the machine for a week, and I can't figure out how to get into the switch to reset the ...

HI guys,I've got a SUN Workstation Ultra40 with Sun keyboard with solaris 5.10 release 6/6 installed.Their is no responds when I try a Stop-A command. Does anyone experienced the problem? Can some one help.Tks

Does anyone know of any cd or dvd drives that are readable in Sun Ultra60 which are not proprietary units? Is it possible to send Sun a harddrive and let them install OS on it and leave the configuration to me? Or purchase flashed BIOS chip for SunBlade100? What may cause memory to be not ...

I'm having quite a bad experience with the X2100M2 series ILO / Service Processor. Initially I was able to install Solaris on the server (with attached DVDROM) without problems. After messing up the kernel I tried to install Solaris using the remotely mounted drive from a windows machine. All ...

Is it possible to run a SunPCI card on an x86 box ?Why ? Simply for the point of doing so.Yes, i agree that software virtualisation such as vmware, or virtual server, would be a better option, but i'm curious.

After installing a new motherboard in a V240 system, I started up the system.It got to the SC> prompt. Now any command such as console -f or resetsc gives me an error saying that the admin password is not set and to set it.So I enter a password and reconfirm it. But then when I try any other ...

I'm using 73gb SAS drives on my X4100/X4200's and one special project is going to require more local (non-SAN) disk space. Can anyone speak to the release of the 146gb drive schedule?Thanks,Doug

hello:we have an ultra 45 and came with ultral 10 loaded. unfortunately the application we use doesn't work with solaris 10. so we tried to load solaris 9 9/05 but failed miseribly (after "boot cdrom"):boot: Cannot open kernel/sparcv9/unixEnter file name [kernel/sparcv9/unix]:any help will be ...

Hi,this is my configuration :- sun x4200 + SG-XPCI1FC-QLC + STOREDGE 3510- RHEL 4 32bit (CENTOS)This is an application server that have to run cobol applications connected to oracleand for this i must use a 32 bit system (rtsora for cobol don't build on 64).But i have a problem with the ...

anyone seen grub not boot correctly after creating raid0 and a fresh solaris install? i cant seem to find any documentation on installing sol10 on a x4100 raid0 disk.sr

I seem to have lost my pre-existing serial/console cable.Any ideas on where I can buy one from ? It needs to be 9pin at the x86 workstation end.

I have a v1280 and trying to use it with a DIGI TS-16 PortServer (terminal concentrator). Can't seem to get it connected, does anyone know if there is a specific pinout for the RJ45 on the V1280

Hello, I am using solaris 9 on my Ultra 10, I just found there is another M64 video card already installed at slot PCI 1, I thought this card should be much better then the default card, so I tried to switch, but seems I can't get it work.I googled and tried the following approach, but ...

Hi, I have Sun Ultra 40 Workstation which comes with Matshita DVD-RAM drive.While I do enjoy working on my U40 workstation, its DVD-RAM drive is wll pretty bad.It just fails to burn DVD/CD-R/RW media too often.Yes, I got it serviced, but it's just the same.So my final hope is to get the latest ...

The manual mentions using PS/2 keyboards with adapters but is there a drawback aside from easy keystrokes? I have a SunBlade100,uses USB,with an adapter for PS2 and scroll wheel mouse,after power on beep code it sits blank screened is this from the keyboard?Someone last nite mentioned the Unix ...

Attempting to load Solaris10 into Ultra60, printout is Boot device:/pci@1f,4000/scsi@3/disk@6,0:fFile and args:Bad magic number in disk labelcant open disl label packageCan't boot device.This appears no matter what I'm triing to load into it,Solaris,BSD,FreeBSD .The drive is one which came ...