Solaris 9 comes with ssh. I have been unable to locate the packages for SSL on the Solaris 9 CD's.Do I have to install OpenSSL or does SUN have SSL packages for Solaris 9.Thank You

Hi AllI've this nice sun fire v480, but I was wondering if there is a tool to figure out how many cpu's are inside this machine... !(I'm running Solaris 8)Any suggestions ?Thanks in advanceLuca

Hi forum,I am a 1st time Solaris user from the Linux land & SGI Irix land.My Solaris 10 is installed from ISO image within a VMware vitural PC. Realized that Solaris is a bit different from Linux and seems to be more spcific and flexible. I am just figuring out my initial installation.* ...

where get iso image for old version os Solaris it is less than 8, such as 2.7/5.7/7, 2.6/5.6/6 and s.o.; reference.

I have a pentium 4,915 chipset with SATA HDD (80GB), 256MB RAM. I downloaded Solaris OS 9-9/05 from Solaris website(all the four CDs-Solaris Installation CD, Solaris Software CD1 & 2, Languages CD.) First i boot off with Installation CD, entered all the details, did the partition exactly ...

The SunFire 280R has 11 external disks. Disk 11 has Solaris 9 installed.In attempting to install Solaris on another disk, the following message appears at the command "boot cdrom" command:--krtld: load_exec: fail to expand cpu/$CPUkrtld: error during initial load/link phasepanic-boot: ...

Hello, I've trying to install Solaris 10 for the past half hour and it always freezes.When I try to load up using the Solaris entry in grub, it prints out the following:-panic[cpu0]/thread=d3627de0: BAD TRAP: type=12 (#mc Machine Check) addr=0-The hardware is as followed:Amd 64 XP+ 3.2 ...

Dear forum, I wonder if any one can help me out ? I'm from the University of Kent and we have an old Sparc-Ultra which runs our Scanning Electron Microscope. Unfortunately i've just had to rebuild the machine and the only Operating System the microscope software runs under is SunOS 4.1.4.Of ...

I am trying to install Sol 10 1/06 release.Problem CDE fails, with Error Opening PAM libraries ?Log in to console (as root) fails with:open_module:/usr/lib/security/pam_authtok_get.so.1 error messageAt the same time I am missing /usr/lib/mps/libnss3.soThanksMilan ...

I have attempted several installs using sol10 and sol11(nevada) and have never been prompted to enter my network information. Here is my main network card<a href=" http://www.sun.com/bigadmin/hcl/data/sol/components/details/14.html" target="_blank"> ...

hii m new in this forum so plz guide me.thanksi m recently joined an organization where Sun Ultra Sparc system is present and not working from long time. They don't have password of that system. i m have downloaded solaris 10 sparc and burn cd's. there is 4 cd's. i m insert cd-1 in cdrom and ...

I'm trying to install Solaris 10 1/06 for x86 on the following:Gateway 5400 (PIII - 450), 256Mb memory, two 13Gb HD.The system currently has an old beta (S10_b72) on it.When I boot from the CD, the GRUB menu comes up with three choices; no matter which one I choose, I get:Error 28: Selected ...

I have a system that was staged for another platform (Solaris 9) and sent to me for use in another application.I want to reload Solaris 9 and partition the disk space for my specific application.I can't get system to boot off the CD ? Keep getting this error. Enter filename ...

Hello all,Sorry if I'm posting this on the wrong group.I have a solaris 10 with raid of / (volume manager-mirror)I lost the passwd of root.Then I did :# boot cdrom -s# mount /dev/dsk/c0t0d0s0 /tmp/a# cd /tmp/a/etc# cp shadow shadow.bkp# vi shadow (chaged de passwd of root for nothing)# umount ...

Hi,I was wondering if it is possible to add additional apache modules to the bundled Solaris apache2 on Solaris 10 using the bundled gcc from /usr/sfw? I have managed to do that with php (with the help of <a href=" http://meljr.com/~meljr/AMPSolaris10.html" ...

I have a Sunfire V240 that I have been asked to install Solaris 2.5 on. I have only installed Solaris 8 and it has been a while. From some research, it seems that 2.5 may be too old to support the hardware in a Sunfire V240. Is this correct? Thanks

HiI am trying to install Solaris 10 1/06 on an Enterprise 450 but cannot get it to boot from the CDROM any more. The CDs were burnt from ISOs and I have tried several (e.g. burning at 1x speed).I have successfully run up the 1/06 installer from CD on this machine, but that was before installing ...

I keep getting the following in the log when executing 'vncserver':ld.so.1: Xvnc: fatal: libstdc++.so.6: open failed: No such file or directoryxsetroot: unable to open display 'tubeamp:33'xterm Xt error: Can't open display: tubeamp:33twm: unable to open display "tubeamp:33"I ...

<div align="left">Hi,I'll start with thanks for your consideration and thanks in advance.I know this deserves to be retired/upgraded/chucked in the bin, but I am stuck doing this to try and upgrade an old bespoke program.Please take the time to read this, someone out there may have the ...

Hi,I want to install Solaris10 from DVD on a Blade1000.After resetting the Blade1000 it founs the DvD.Boot cdrom will start but does not found a bootable file.another Sun was installed correctly with this DvD.Any hints what to do?

i've a problem i've buyed an ultra 10 (used)i've reinstalled solaris 10 01/06when it boot the o.s. it give this error message "hme0: Link Down - cable problem?"and network don't work.i cannot ping my router but i've gave to my sun an ip of the same netmask (sun ip 192.168.1.88 ...

where i can find it?i've downloaded this<a href=" http://javashoplm.sun.com/ECom/docs/Welcome.jsp?StoreId=8&amp;PartDet ailId=Sol10-Comp-Full_image-SP-x86-G-F&amp;TransactionId=try" target="_blank"> http://javashoplm.sun.com/ECom/docs/Welcome.jsp?StoreId=8&am ...

I am trying to install Solaris 8 on an Ultra 10 I got. It had a blank harddrive, a vga port and a 13w3 port. Looks ready to rock and roll.I downloaded and burned the sparc iso, at a nice slow speed, powered it up, put the CD in the drive and held down stop-a but I get no signal. I tried an old ...

I'm trying to install Solaris 10 from CD on a netra t1 everytime though it gets to creating devices and fails with this errorCustomizing system files- Mount points table (/etc/vfstab)- Unselected disk mount points (/var/sadm/system/data/vfstab.unselected)- Network host addresses (/etc/hosts)- ...

I want to upgrade solaris 9 4/03 to solaris 9 9/05 to upgrade I boot with cdrom to use suninstall. The problem is:When I try to upgrade our server, I never passed the function "upgrade" , I can only select "initial install"The server is a SunFire V240 The Partition table ...

I have found an unused JNI FCX-6562-L HBA card. I need to get it working.I tried to get the drivers from JNI. However, I was told that this particular card was made by JNI for Sun, and that JNI drivers would not work with it, and that I must find out from Sun how to install it. I have searched ...

I've re installed Soloris 8 on an Ultra 1. When i try to run a program i get an error which tells me the program can't find the path.For some reason i have to type ./program name to get it to start. I didn't have to type the ./ previous to the install. Lastly the path isn't shown at the ...

Hi,I'm having a Sun Blade 150 Workstation (quite old one). I'm having IDE CDROM & one USB CDROM. I'm having Solaris 5.8 installed on it. Now I want to upgrade it to Solaris 5.9 9/05.First I tried to install it from the IDE CDROM by giving the command "boot cdrom" from OK ...

Can you remove a package like SUNWuium andthen immediatelyadd it back in like:pkgadd SUNWuium ?This package happens to be for use of locales.Will removing then adding it break anything ?Is this a "good" or "ok" thing to do?Rather do this than re-install enitre Solaris CD ...

Now I can't boot. boot -r doesn't work.Can someone help?Thanks.

Morning all: Need some pointers about repairing an IDE disk. Sun Ultra 5 Solaris 10. booting, shows errors on ide0,0. I was able to boot from a CDROM, it sees the ide device. I齧 wanting to mount that disk and see if I can delete some files and run fsck. I can齮 figure out the mount command. ...

I am trying to locate the zfs packages in the 1/06 Solaris 10 release. Is it hidden under another name or did it not make the release?

HiI have a SUN Blade 1000. I loaded Solaris 10 a few days agoand had it running pretty good until I ran an update program. Now I cannot boot the dam thing. IT just hangs at a * prompt somwhere in the boot process. I would like to re load Saolaris 10 but do not have a clue how tomake the machine ...

Greetings,I am getting no $DISPLAY (DISPLAY: Undefined variable. ) on the solaris 10 system when doing an 'ssh -X hostname' from my linux workstation. Can someone please help?I've installed Solaris 10 01/06 Core System Support Software Group to this sun4u sparc machine. I've additionally ...

I'm sorry if this is in the wrong forum, but I didn't see a better/more relevant spot for it.Is there a way to download the Solaris 10 without having a SunSolve account? When I tried to download it I get redirected to a login/register page which requires a SunSolve support contract.Thanks in ...

Hallo to everybodyTo whoever could help me, I wish to describe a big problem I am facing on my SOLARIS 9 server (UltraSparc III+).I am porting some C applications (without multithread) from UNIX SCO to Solaris 9 (I am using Sun Studio 10.), but all the executables generated end with a ...

I have an Ultra 10 and I am trying to install Solaris 8 on it. I have actuall real Solaris 8 CDs. I put it in the cdrom in, hit stop-a and type 'boot cdrom'. The system resets. When it boots it I get: Can't open /pci...etc Can't read disk label Can't open disk label package Can't open ...

After shutdown I am not able to boot the machine.Displays:Warning: missing name/number? on line 1 of /etc/name_to_major... same for all subsequent linesPanic[cpu0] /thread=10408000: couldn't find major number for 'rootnex' .....I am able to boot it with the Sun OS Cdrom ...

hii would like to know whether we can have two OE (solaris 8 and solaris 9) in a single hard disk (C0t0d0)if yes please tell me the procedure how to install two OE in a single HD

I need to reload several Sparc Stations that are using 4.1.3. Does anyone know where I can obtain an old copy?

Hi to all, I have a problem with booting process of Solaris 9, installed on Netra 240 server. So the problem is, that after power interrupt event, the server doesn't boot, it goes in boot prom state and I have to manually write "boot". The parameters in "eeprom" concerning ...

I have installed solaris in PIII 500 and all works perfect during instalation, but when reboot to run this message appear:<i>boot:source: open of '/etc/bootrc' failed</i>I try to boot with the software CD1 of 2 and it say the sameI'm changing from windows and my knowledge of unix ...

I have Solaris 9 (Intel Platform). On disk exists two partitions: x86 boot & SOLARIS. I want mirroring this disk on other disk in system.Were I can receive step-by-step for this procedure. In docs I can't find this procedure.Michael S. AndrosovEXPOCENTRe-mail: <a ...

Hi can anybody tell me if i can mount a NTFS partition under Solaris 10?Thanks for ur help.

Can somebody give me some advice.I am trying to install Solaris 9 using a Boot floppy and CD, the installation seems to proceed okay, with the exception of an error regarding the SBpro ( i assume this is the SoundBlaster Pro on-board Sound card). When it gets to the Disk Slicing stage it asks ...

I would like to use a USB flash drive for data transfer but I'm not sure how to mount it to the filesystem.When I do a 'mount /dev/usb/mass-storage0 /mnt' I get an error saying '/dev/usb/mass-storage0 not a block device'.How do I mount an USB flash drive?

Hi All,I have a problem with a script. when executed over a Solaris 8 over sparc machine it executes properly but when the script is executed on Solaris 8 on Intel Platform it says 'error on line 1'. I am new to shell scripting, but I dont think there is problem with the Interpretor line on ...

This is the first time I have installed Solaris 10 on my PC. I have an ASUS A7N9X-E motherboard, which includes a Marvell 88E8001 Gigabit LAN. Solaris seems to have installed OK. How can I find out if there is an appropriate driver for the onboard LAN? It is not on the hardware compatibility ...

Hi ,I installed solaris 10 on my home pc.The keyboard stays always in US qwerty.I have a Belgian keyboard ( Microsoft Multimedia Keyboard ).I tried with setenv and locale , but it stays always in qwerty !Can someone help me ?ThanksHans

Hello All, I'm trying to install Solaris 10 GA 03/05 on a Dell Inspiron 8000. It currently has Solaris 10 b-72 installed on it, running with no problems. When I went to install the newest release of Solaris 10 it now hangs (keyboard is still responding) at "Discovering additional network ...