<p>I would like to know where is the ulimit value stored in the shell. And how to get or modify it using the C program</p>

Hi Friends,I have installed Firefox and it is working perfect. Now when i installed the flash plugin and tried to access a flash file embedded html file, it is not working.The error log is as follows:LoadPlugin: failed to initialize shared library /opt/sfw/lib/firefox/plugins/libflashplayer.so ...

Hi Friends,I have installed Firefox and it is working perfect in my Solaris X86 system version 5.10 . Now when i installed the flash plugin and tried to access a flash file embedded html file, it is not working.The error log is as follows:LoadPlugin: failed to initialize shared library ...

<p>I wonder where did 'whereis' command do in solaris. I thought it was not a platform specific uinix command.</p><p>Mahima</p>

<p>Hi,</p><p>Can you please let us know why the function gethostbyname_r returns errno 22 (EINVAL).</p><p>Regards</p><p>Vikas K N</p>

In last days I have made backup of level 0 of my Solaris 8 SPARC using ufsdump 0uf /dev/rmt/0 /silcename, each slice was copied correctly, with the exception of my /oracle partition (slice) on which the following error is log: -Jul 8 11:54:58 server1 dada: [ID 107833 kern.warning] WARNING: ...

Hi ,When the new update u4 for Solaris 10x86 will be avaliable ?The Xen will be include in Solaris 10x86 u4?Best Regard'sMarcelo Moreira Martins marcelo.martins@m3system.com.brTechnical Consultant - Tarantella Systems EngineerSE- Systems Engineer - M3 System Integrator.Sun Microsystems do Brasil - ...

Hi guys,I have solaris 10 on a workstation sunblade 150.I have problem running smc as root (su) when logged in as regular user. I get following error.# /usr/sbin/smc &[1] 878# It appears you are attempting to run the graphicalSolaris Management Console from a terminal which doesnot have a ...

Two machines, A, which is Solaris 9 and B which is Solaris 10.Both built by Jet, some months apart with the following as the locale definition.base_config_sysidcfg_system_locale=en_GB.ISO8859-15Both systems have the /etc/default/init set the same, ...

Can anyone tell me what method is best to take all the data from one system : Sunfire V250 to another system Sunfire V125.Using Solaris 8 on the source machine.Planning to upgrade on the SunfireV125 after the restore, to Solaris 10 and all its apps.The only apps installed on the source machine is ...

hello! admin!environment: 2 X E2900 + 2 X Brocade fc switch + 1 X SE6130system:solaris10U2;cluster 3.1;userd MPXIO Two machine hostname:one is systong ,the other is synbak.At synbak execute format is Normal.But at systong execute format#formatSearching for disks...doneAVAILABLE DISK SELECTIONS:0. ...

Hi All,Iam working on SunOS 5.8 Generic_117350-11 sun4u sparc SUNW,Sun-Fire-880 system.I have read in manpages of directio() system call that, using this we can improve performance(improve speed) in reading and writing big(GB) files.Below is the sample program. For testing i tried both with and ...

hello there,I am using solaris 10 on my sun sparc ultra 10 box.I am facing problems connecting to a remote server using the X11feature of ssh. This is the error message i when i tryto log on to that server. I do get logged on but i cannot get thexwindows system to work on my box.that means i can ...

After a bit of searching I've found this question asked in various places in this forum without having an answer. Is anyone able to help me and the others ...

Hi,When we install Solaris 10 with the "Remote Services" set to disabled, we then have to manually start individual services (like ftp, telnet, etc.) with "svcadm enable".I am having some trouble finding the correct services that will enable a remote X-emulation (ex: CDE desktop). Enabling the ...

Ive recently installed Solaris v10 X86 and have two questions. The system is a Dell E521 with 4GB RAM and 1GB SysKonnect NIC, and internet is provided via a cable modem, thats plugged into a Netgear router, and the Solaris 10 box is plugged into the Netgear router via a CAT5 ethernet cable.1. I can ...

I am trying to install Solaris 10 U3 via jumpstart. I would like to set up the server so that it is running SVM after the install. The following profile gets close to what I want:filesys mirror:d0 c0t0d0s0 c0t1d0s0 8192 /filesys mirror:d10 c0t0d0s1 c0t1d0s1 8192 swapfilesys mirror:d30 c0t0d0s3 ...

Hi Gurus,Need some help, I have a 2 node cluster in the process of being setup where we have used a 1Gb link in a seperate VLAN for exclusive access to the db. Because there are only 2 nodes required in this VLAN I have used IP's from a private range 172.16.0.0/12 hence no routing involved, no ...

Hi All,I've been tasked with doing a storage assessment of our Sun servers. We need to find out the following from our servers:1. Largest files2. Duplicate files3. Total used space4. Total free space5. Files not accessed in over a year6. Files not backed up.7. Output should be easily put in a ...

HelloI have a fresh Solaris 10/6 install. My disk have 20Gb but I used only10GB for the base solaris installation and home directory.I have 10GB free without any partition.I would like to use my free space to store my zones using zfs filesystem.In example:/zones/zone/zona1/zone/zone2How I can ...

Hi ,I need help on this issue..I need to install patch 119848-02 which fails because the package SUNWsrspx is not installedI downloaded NetConnect.003.001.001 package and executed the script as follows ./InstallNetConnect.003.001.001.shIt fails with following error. pkgadd: ERROR: The package ...

<p>I am using the pkgadd to install the application pkg. I want to know if there is pkg command like 'rpm --upgrade' to upgrade a pkg from verion 1.0 (already installed) to 2.0 (new version) directly.</p><p>I am appreciated for your response. </p><p>Thanks.</p>

dear all,i am new in sun system & i have sun sparc 20 with external HDD 9GB .this HDD faile & i replace it with the new one HDD 18GB & format it as the old one for (/var , /usr2, /usr4) and i restore usr4 & usr2 successfully & /var but when I make a reboot & making df k I ...

dear all,i am new in sun system & i have sun sparc 20 with external HDD 9GB .this HDD faile & i replace it with the new one HDD 18GB & format it as the old one for (/var , /usr2, /usr4) and i restore usr4 & usr2 successfully & /var but when I make a reboot & making df k I ...

Hi,I have a Solaris sparc 5.9 setup. When I give the command crontab -e, instead of opening an editor the control comes to the next line with 0 displayed. Then I have to use CTR+Z to come back to the prompt. The have pasted the screen shot of the same:$ crontab -e0^Z[2]+ Stopped crontab -e$Kindly ...

<p>hi</p><p>on a solaris sparc 9 environment <b>mailx</b> command is unable to send mails to the outside world. What could be the reason & needs to be checked?</p><p>thanks</p>

Sun v210. Fresh install of Solaris 10, 11/06 . All commands are done as root.I am unable to create a sub-directory under /homeThe error I get is mkdir: Failed to make directory "toto"; Operation not applicable I don't have NFS loaded. --> share returns nothing. /home is not a mounted filesystem. ...

I have a Solaris 10 server with two internal disk drives. The drives are c0t0d0 and c0t1d0. Yesterday, c0t1d0 (mirrored drive) died and I had it replaced.Below is the metadb -i output from the failure--flagsfirst blkblock counta m p lu 16 8192/dev/dsk/c0t0d0s7ap l 82088192/dev/dsk/c0t0d0s7M Wp l ...

I have a question regarding memory and swap calculations in Solaris.I have box that has 2GB of RAM and 3GB of swap. I use ps command to check how much memory each program consumes. When I sum results I get numbers those are much smaller than memory and swap sizes: sum of the total size of the ...

Hi all,I installed Solaris 10 on a 15-GB partition. According to the wesite http://www.sun.com/software/solaris/specs.jsp, it needs only 2 GB mim; now after using for a while I discover that I only have less then 400 MB space left on that partition (the status bar in the Explorer-like window of ...

When I run the command prstat -u user 1 1 I get about 100 lines of output. Which is fine. But if I pipe or redirect the command it only comes back with about 15 lines. prstat -u user 1 1 |more still cuts it down. So trying to use prstat in a script, like uprstat found elsewere, gives inaccurate ...

I'm trying to setup a banner message for incoming FTP connection for Solaris 10 server. It does not work the way I set Solaris 9 servers. File /et/ftpd/ftpaccess has entry:banner=/etc/ftpd/banner.msgI modified inetd.conf file:ftpstreamtcp6nowaitroot/usr/sbin/in.ftpdin.ftpd -a -lRestarted inetd. ...

<p>Is there a way to just list the active ipf rules, equivalent to "ipfilter --list"?</p><p>I'm reading the man pages and mystified I can't find it.</p><p>Thanks --w</p>

I just installed Solaris 10 on my computer 2 days ago and I still want to be able to play windows games. I have heard about about wine so I downloaded the package and added it. Now I have no clue what to do. I cannot run the command wine in the terminal without getting "wine: not found" and if I ...

FAQ and other (hopefully out-of-date) Solaris forum entries state that inter-zone routing happens internally to Solaris (i.e. packets do not go out over the wire). Is this still the case? If so, is there:A) a reasonable (i.e. doesn't require separate subnets for every zone) workaroundB) plans to ...

Hi Techies,When I initiate boot vnet0 -install from the ok prompt of the client i get the following message contiously...{0} ok boot vnet1 -v installSun Fire T200, No KeyboardCopyright 2007 Sun Microsystems, Inc. All rights reserved.OpenBoot 4.26.1, 4096 MB memory available, Serial ...

<p>Hi,</p><p>Good day !!!</p><p>Is there any chance of data corruption of the tape drive or the hard disk if I apply metdetach in the multi-user mode and take a backup of the detached hard disk ?</p><p>Thanks</p><p>Shamim A M Zaki</p>

<p>Hi , </p><p>How do we can configure Dynamic DNS server on Solaris 10 OS , in Linux boxes we can use "dnssec-kegen" and associate with dhcpd.conf , how like same we can do with solaris ,</p><p>any help will be highly appreciable </p><p>Thanks in advance </p><p>Kinshuk</p>

<p>Hi everyone,</p><p>I have a quick question about Admintool and top utilities in Sun OS 10. Do you know where i can find the package?</p><p>Thanks,</p><p>Marin</p>

<p>Hello everyone,</p><p>I have a question about SunSO 10 package. Are they come with the CD/DVD installation? And how you guy identify the package name?</p><p>Thanks,</p><p>Marin</p>

<p>Can anyone please point me to information regarding virtualizing sun clusters?</p>

To whom it shall concern or can just help out:Solaris 10 QuestionsIf I wish to run an iSCSI target under Solaris 10, will GA do it or do I need the Express verison of Solaris 10 (for an E450, SPARC)?If the GA version of Solaris 10 supports iSCSI targets, how capable is it to socialize that with ZFS ...

Hi everyone,Running Solaris 10 with root access.I downloaded vim from the the Sun.com freeware for Solaris 10 page (read: THIS site, not solarisfreeware.com, vim.com or another external site). I first downloaded the dependency packages bundle, extracted the packages, and installed all the packages ...

<p>dear,</p><p>i need your help becauce i need to download patches(112334-01, 111308-03,108921-16) but unfortunatly i wasn't successful. would you please give me some information?</p>

<p>Please let me know the steps as to how to install Solaris10 using the DVD from Solaris 10 kit DVD. I do not have DVD player on my laptop/desktop.</p>

I use solaris DE 5/07 in my Thinkpad 43. Everything had gone well untill the machine went to sleep. When it was woke up I found the system work a bit slow. For example, the time for a normal window changing to a minimal form or opening a new site is longer. I don't kown why. Can anyone give some ...

Dear all Oracle malfunctioned on Sun Cluster 3.2 running on Solaris 10 , and try to failover few times and after i dont let be restart resourse group .i tried to change Pingpong_interval but was giving me the following errorsJul 22 00:21:50 PR5 Cluster.RGM.rgmd: [ID 674214 daemon.notice] rebalance: ...

Hi,First and foremost, I hope that this stands in the right place. I'm new to these forum, and seen the fast that this is not high performance networking, I have put this here. I hope this is right?Now to the point. I have just installed solaris 10 as my first non windows OS. Perhaps this was not ...

Hi all,I need your help.My SUN machine ( Sun Enterprise 220R) has 2 hard disks : disk0 and disk1.disk0 is the system disk from which I usually boot the system.disk1 is the secondary disk I want to use for backups.I made disk1 bootable with the installboot command :installboot/usr/platform/`uname ...

Hello everybody,We are trying to run BEA WebLogic Server on Solaris 10, and we are running in serious trouble. The problem is that the platform we are using requires a lot of memory (1GB at startup!) and after some hours of usage, our application crashed with an OutOfMemory error. The memory ...