rb wswapfreere mfpi po fr de srm0 m1 m5 m7insycsus sy id 0 0 102 7577592862512 75 287 107 69 70 0 36 2041 6920 841 8894492this is the snap of vmstat , Which shows 102 processes have been swapped out ( column "w" ) . Wat does that convey ?Does that have any impact on CPU utilization ...

hi guys i can ask you some clues on can disable (wheel button) on solaris 10 (sparc) i have some application problems using a scrolling mouse. somebody of you know how disable wheel scrolling function?Thank you.

Hi!I am trying to apply patch 118855-36 on Solaris 10 6/06 s10x_u2wos_09a X86 with Kernel Generic_118855-19.When I try to install the patch in single user mode I receive the followingerror messages:118855-36 failed to install due to a failure produced by pkgaddThe log /var/sadm/patch/118855-36 ...

Hello,I am running Sol 10 11/06 on a Sun Blade (64-bit). After installing patch 119059-27, an imaging application that is vital to my workflow will no longer run. I get a Segmentation Fault.The application is ENVI Freelook, and is available for free ...

I am trying to add a new user so I can do some software testing.I am usinguseradd -d /home/test -s /bin/bash test I can log in using ssh however I can not login using the X GUI. I see the problem seems to be that there is no home directory and I can not make one. I am doing all this as root. ...

Greetings,I'm not having much luck with the forum and I was thinking it may be my selection of forum area to post in. I'm currently developing in C on an E25K running Solaris 10. I'm trying to write high-performance code to take advantage of my environment and I need to know where I can post ...

I've got about 20 T2000 systems all running either the 6/06 or 11/06 release of Solaris 10. They're all using the e1000g driver for the on board NICs. They're all connected to various gigabit switches in our environment. My problem is that I'm getting nowhere near gigabit speeds out of any ...

Hi,How do I increase number of ptys in Solaris 10, also what command to view how many total currently set?I try to put set pt_cnt = X and rebooted, seems to be not working.Thanks!

I installed a new full load of Solaris 10 U3 (ie 11/06) on a sparc box (V210).Ran install_cluster in the latest recommended patch set and it installed abouta half dozen patches.That seemed low so I rebooted and ran install_cluster AGAIN and it succeededon thirty four (34) patches!Whats with ...

Hi Everyone,Can you please let me know how to install solaris 10 on the laptop which has already got windows vista.I have a seperate drive (S:) 10GB for solaris OS.I have got Sun OS 10 DVD from Sun.I tried to install but it was stuck at..when i select Solaris among the three options to boot.It ...

HiI wonder is anyone here can help me see the light....V245S10VxVm 4.1Encapsulated the root disk, updated /etc/system. Rebooted the server but it is hanging...............Hardware watchdog enabledip_arp_done: init failedFailed to configure IPv4 interface(s): ce0Hostname: s2NOTICE: VxVM vxdmp ...

Solaris 8,9, & 10 for Sparc all display disk manufacturer information on the format command output: 0. c1t0d0 <SUN36G cyl 24620 ... >1. c1t1d0 <SEAGATE-ST3360704FSUN36G-0826 cyl 24620 ... > But for X86 this information is not displayed:0. c1t0d0 <DEFAULT cyl 17846 ... >1. ...

Hi,We are backuping several directories (/database, /index) to a backup tape. How could I find out how much space these data are taking on the backup tape? we use the cpio command to backup.Thanks,Cinderella

hi i just downloaded all the segments to make a instilation dvd and it says i need to combine them into 1 useing a line of code in msdos... i never use dos and cant figure out what it means to type inMessage was edited by: unh0lygh0st

Hi,I am installing Solaris 10 on V40z which comes with a trident blade 3D graphics and using an old compaq v55 monitor. After installation, Java Desktop does not come up and it stays in init 3.What is the likely problem and remedy? This is really frustrating it seems Solaris always have these ...

Hi all,Here is my problem...1) Installed Solaris 10 on my laptop as the only OS, worked fine.. 2) Created two partitions on my HDD - 30 GB and 50 GBa) Installed WINXP on the first ( 30 GB ) partitionb) Installed Solaris 10 on Second Partition ( 50 GB )Now when I reboot after installation and ...

I have 4 cd set of solaris 10. I have an 80 GB hard disk with four partitions(NTFS). My current o/s is xp. Do i need to do any partitions in my hard disk before starting the installation? (I mean deleting any logical drive).Previously i tried installing by removing the logical drive for a ...

I have 4 cd set of solaris 10. I have an 80 GB hard disk with four partitions(NTFS). My current o/s is xp. Do i need to do any partitions in my hard disk before starting the installation? (I mean deleting any logical drive).Previously i tried installing by removing the logical drive for a ...

Greetings experts,some time ago I participated in a SC3.0 (yes, that's quite some time ago) training. Besides other, we learnt how to make NFS HA. In brief we constructed a triple ("a resource group) consisting of 3 resources: the logical host, the NFS application and the HAStorage ...

How to add An HAStoragePlus resource to a resource group with 2 Virtual Nodes. (zones)Do I need to define the zones with this storage lofs or any other type?Thanks

Hello I've a SB 150 with Solaris 10 loaded. I tried to install top utility using pkgadd command and it showed that the package was added successfully. Following is the package name that I installed:top-3.5.1-sol25-sparc-localAfter this I have rebooted the server also. But when I type top in ...

Hi All ,I want to know what is "wizard" password and "dubug" command in sendmail.Regards,R. Rajesh Kannan.

We rely on the usual sort order, observed generally on Unix and up to 6/06 in Solaris 10 too, but since we installed 11/06 on one SPARC system, the (default) sort order of directory entries returned by readdir seems to have changed. Is anything known about this? Does anybody need an

Hi,I'm having a problem with a large group (about 2500 members). I first thougt this is a Directory Server Problem, but the Server Log is identical for small and large groups and does not show any problems. Additionally even if i put the group (with all members) into /etc/group, I still cant ...

I have a HP DL385 with 4 SATA drives, the machine crashed today for unknown reason and rebooting was not possible since the boot-archive got corrupted.I booted into failsafe, I get a prompt but I also get"No installed OS instances found".Apparently the SATA driver I loaded from a separate disk ...

Hello,The proc files are causing problems for Disk Analyzer and File Manager on Solaris 10.It seems they are being read in a continuous loop. For example: in file manager, I click /proc folder then I can click /0, then /cwd, then /proc, then /0, then /cwd etc....In Disk Analyer will ...

Hi,I am given the task to make a bootable backup of the OS (Solaris 9). I know I can use ufsdump to backup the system in single user mode. However, to make a backup bootable, shall I backup the file system to a DVD? Any advice will be greatly appreciated!Cinderella

I'm having problems getting the driver to load for this nic on this laptop. I've tried the various other suggestions found in the forums (boot from cd, sys-unconfig, ifconfig plumb, etc.) but I think my basic problem is that the driver isn't recognized/loaded.prtconf shows that "driver not ...

I have 2 enterprise 250s and 1 Ultra10 all running Solaris 9.Due to recent network changes I have to change the subnet mask on the ethernet interfaces. I change them fine with ifconfig but when the system reboots the subnet mask and broadcast address revert back to what they were before the ...

Where can I find help on the info in the /etc/release. Here is what I have for my server now.Solaris 10 11/06 s10s_u3wos_10 SPARCCopyright 2006 Sun Microsystems, Inc. All Rights Reserved.Use is subject to license terms.Assembled 14 November 2006.Is s10s_u3wos_10 a build number just like Nevada ...

Hi,I have 2 identical x86-64 servers running the same version of Solaris 10 (details below). One arrived about a month before the other, so I set them up separately and, although I kept notes etc and tried to set the second one up the same, it isn't working quite right. The issues I have, ...

Hi there.Building gcc 4.2 on Solaris 10 on x86 failed:=> ./configure --prefix=/rwthfs/rz/SW/UTIL.common/gcc/4.2/i86pc-pc-solaris2.10 --with-gmp=/rwthfs/rz/SW/UTIL.common/gcc/gmp/i86pc-pc-solaris2.10 --with-mpfr=/rwthfs/rz/SW/UTIL.common/gcc/mpfr/i86pc-pc-solaris2.10 ...

Folks'es,before I go and drown my desperation in whatever, I give it a last try in this forum. Here is what my troubles are:I have a DELL E521, with AMD X2 5600, 4GB RAM, 500GB Disk, ATI Radeon X1300 Graphiccard with 256 MB.It is currently running Vista Business x64.All is well with this and ...

Hi,Have a v440 which passes full diag routine. with brand new solaris 10 dvd received from sun, with a freshly formatted 9gb hdd. When trying to bbot from the dvd, "boot cdrom", i get the following cycling through.Hardware watchdog enabledsvc.configd: smf(5) database integrity check ...

Solaris 5.8Sun Blade 150 (64-bit) I have got SYGSYS when call syscall(...) from my 32-bit application.Is it possible to use syscall() in 32-bit applications under 64-bit Solaris?

hello everybodyhardware:motherboard supermicro X7DB8raid areca 1220i had no problems during installation. i use just initialized raid with arcmsr 1.20.00.13 drivers, successfully tested on S10 6/06 release. all partitions are ufs-formattedbut after reboot i suddenly get a pair of errors:Failed ...

I'm trying to put together a BMR solution for two Solaris 9 servers we have, neither has an internal tape drive. I was trying to follow the flash archive/jumpstart documentation but it is not very detailed. I installed a jumpstart/archive server to hold the images of these two servers.On one ...

I just received a brand new Sun Fire X2100.1- Startup the machine...2- Pick Solaris 10 from GrubGet a black screen with a flashing cursor...Fail safe mode works.

Hi all!I know this subject having been handled on many forums, but I'd still need some help in configuring Solaris 10 11/06.I just got a laptop based on Uniwill M30EI0 -platform with which I can't get full widescreen resolution 1280x768 working. I'm using Xorg server and have downloaded the ...

Hi All -When Locale is set to en_GB.ISO8859-1 and sort done, the output does not match the sort done on the same file with Locale set to en_US.ISO8859-1. Please note that both are using the ISO8859-1 char set. Why is the difference?Your input will greatly help.Thanks in ...

I have posted this before.....however no reply or help yet!!please....if anybody has suggestions...I had to resort to FTP files transfer...took 5 days!!Hello all,I have been trying for the past week to mount a 2 TB usb storage device that I built (VENUS box with 4x 500 gb). It shows up when I ...

Hi,I have these environment.- 2 nodes V40Z.- Sun cluster 3.1u4 (x86)- Solaris 10 11/06 (x86)- QFS, SLVM/OBAM- Oracle RAC 10g R2I use the shared disk to make a metaset called racset with SLVM using the did's for the data raw devicesroot@orademo1 # metasetMulti-owner Set name = racset, Set ...

HiI have written a non-STREAMS character device driver for Solaris...It passes the 'modload', 'modinfo' and 'modunload' test successfully.....Now, I have the xxopen(), xxclose(), xxattach(), xxdetach() entry points in my driver.. I am also using the ddi_create_minor_node() function in my ...

Hello,I'm following the same aim, i used /usr/sfw/bin/pdf2ps but i received the following error: gs: not found. So i tried /usr/sfw/esp/bin/pdf2ps i then i obtain a ps file.But my pdf was with arial and Century Gothic font and when the ps file has generated i obtain an other font. It seems ...

Hi,Recently, we started getting WARNING messages from our ISP that one of our box IP generating malicious traffic.We have a Solaris 10 Box (OS patched upto date - services like telnet, snmp are disabled already) with that IP (ISP mentioned), is generating malicious traffic. I confirm it doing ...

signal: 10 -- SIGBUSstack trace:<StackTrace>##### Object: /usr/lib/sparcv9/libaio.so.1assfail(0x10000,0xffffffff72702000,0x0,0xffffffff77e08000,0x0,0xffffffff7b1e975 9) + 0x258assfail(0x10000,0x0,0x3,0xffffffff77d02650,0x3,0xffffffff7fffd66c) + ...

Hi there,Is there a Solaris command to show all the network interfaces in a server(plumb/unplumb etc...).I have a V880 that has an eri0 on board, plumbed up. It also has a coupleof ge0, ge1, and ce0, and a qfe card.ifconfig -a only shows eri0.(I am using something like "dladm show-link", but ...

I am running Solaris 10 on an X2200 M2 machine, fully patched with all the latest patches.I am trying to run an application, which I have configured and tested to run in the global zone, ie locating the startup script in rc3.d works. However, when I created a non-global zone to host this ...

Hi,I'd like to migrate a couple of zones off of a very busy T2000; mostpackages on the target machine for the move are on a more recent patch-level than on the machine where the zones come from.How trivial is the move, can I patch them up from their new globalzone after a forced attach? ...

How do u backup the operating system to 4mm DDS3 tape?...is there a special command to type, or is it just ufsdump?Im using solaris 2.6 platform, and DDS3 drive.Please assist. Thanks a lot.