Hi, I am looking for ANY Wirless PCMCIA card that is supported by Solaris 10.I was searching the net, and could not find anything.Sun's HCL lists only a couple supported Wirless cards, but they need third party drivers for $99 (www.Lynnsoft.com), which will never buy.I am thinking of ordering ...

cd /usr/apache2./apachectl startBut testing http://localhost is not successful.It seems that httpd is not running.

I've just installed Sol10 on an E4000. Keyboard +monitor fitted (TGX+ framebuffer). Everything is fine until I leave the system for a while. The monitor goes into sleep mode and then won't wake up. Reboot is needed then it all starts again. I haven't seen any patches that might affect this. ...

Enjoying Solaris 10, but I hav one petty gripe.Every time I click a mailto: link Mozilla tries to start Sun email and calendar. Don't want it. Don't need it. I use Mozilla's mailer.How do I alter this value-subtracted configuration back to Mozilla's default of invoking its own mailer? ...

Hi all,I have trying to set up Apache server in Soalris 10, and to compile with gcc but I am having problems.The first part of ./configure --prefix=... is fine, but when I type make I am getting this:# make===> src===> src/regex<=== src/regex===> src/os/unixgcc -c -I../../os/unix ...

I may have missed something very basic but here is my problem: I have installed Solaris10 from the four CDs and booted up ok - but I can only boot into command line Unix - I was expecting to see a GUI desktop. Where has the GUI gone?

I performed a fresh install of Solaris 10 on a Sun Enterprise 250. When I go to login to JDS or CDE, it continually loops back to the login screen. I can login through the command line though. I checked /var/dt/Xerrors and didn't see any messages related to the problem. Any suggestions would ...

how to install bz and bz2.....then how to use command in bz and bz2

Hi all,The new Solaris 10 support more than 8 slices. Does anyone have any idea how the default VTOC is produced on the Solaris 10 and Solaris 9?Also I wonder what is the meaning of reserved 8MB slice on the default VTOC of our disk.c2t16d0; 0 root 128mb 1 swap 128mb 2 unassigned > "not show ...

I'm trying to connect to targets off a Sanrad vswitch from a Netra T1 running solaris express snv_10. I can see the targets, a devfsadm -i iscsi shows the system bringing the targets online, but I don't see anything in format afterwards.Both targets are fully funcational on a Solaris 8 system ...

Hi we were using directory server 5.1 and following was the syntax of ldapclient command in solaris 8ldapclient -i -a simple -b dc=mycompany,dc=com -D "uid=proxy,ou=Special Users,dc=mycompany,dc=com" -w pwd 210.210.32.20:386Now we are using the same directory server on solaris 10but it seems ...

Hi all,Two month ago, I have download Solaris 10, and there aren't the ZFS filesystem, so I want to know if Solaris have been upgraded and if it now contains the ZFS filesystem.Thanks.Willits

GreetingsI am having problems with Apache 1.3. When I am running the script ./src/Configure my output is:#./ConfigureUsing config file: ConfigurationCreating Makefile + configured for Solaris 2100 platform + setting C pre-processor to gcc -E + using "tr [a-z] [A-Z]" to uppercase + checking for ...

I have a script that I've been using in Solaris 9 to disable incoming mail. The script basically- edits the "/etc/rc2.d/S88sendmail" file- replaces MODE = "-bd" with MODE = " "- sends command "/etc/init.d/sendmail stop" to stop sendmail- sends command "/etc/init.d/sendmail start" to restart ...

Hi all,I have just installed Solaris 10, and I have forgot to install SMC, and I really don't know how I can install it.So, how I can install the solaris management console ?ThanksWillits

Anybody have all of the documentation on a cd image? I cant find it, only the big sections of books.Also I was wondering if tehre are any drivers that need to be installed for usb, and how do I mount it? From what I have found there is no mount command.I am very new to solaris, so thanks for ...

I have been searching all over for this, and I believe I am supposed to use kdmconfig. Problem is that kdmconfig does not appear to exist on my system (find / | grep kdmconfig. Everything works fine just cant get the resolution to change...I get all kinds of kdmconfig.png files..Any ...

I am trying to disable NFS client in Solaris 10. In Solaris 9 I would simply rename /etc/rc2.d/S73nfs.client to /etc/rc2.d/s73nfs.client Since /etc/rc2.d/nfs.client does not seem to exist in 10 I'm wondering how to do this.Thanks in advance for the help.Max

How to Install & configure samba 3.0.10 on sun solaris 5.9How to share the sun solaris folder in windowsXp

Hi all,I am a little noob under Unix, and I need to add folder to my $PATH variable, but I want at each startup these path.I want to add these path :/usr/sfw/bin/opt/csw/binI add them in the file /etc/profile, but nothing is done.I use bash.Thanks ...

Can someone help me add a user and password

hey all i'm new here and i wanna ask you about gcc on solaris 10.i've downloaded 4 CD's of solaris 10 and have installed all packages these CDs ( in 4 CDs ) but i don't know, i can't find the GCC inmy solaris 10 machine, so where's the GCC ?or maybe there is another CD of solaris 10 ...

Can anyone explain how to best keep Solaris 10 patched with all the latest security updates? I read about Sun Update Connection Services here: http://www.sun.com/service/sunupdate/Which indicates this is NOT a free service but is available for a 30 day trial. Is Sun going to make security ...

Hi all:Before install oracle,we need configure Kernel Parameters in /etc/systme,such as shmsys:shminfo_shmmax,but accroding solaris document:Solaris Tunable Parameters Reference Manual,they have removed some parameters used by oracle,such as semsys:seminfo_semvmx.I'm confused by that manual,if ...

Hi buddiesI have installed Solaris 10 on SPARC SUN 280R Fiber channel. I was able to configure apache. When I tried to installed phpnuke it was susccessful as long as the files path are concerned the Mysql dbase was also susccess ful. When the I access the Document root the php module seems to ...

I am trying to run Samba on Solaris 10, but Swat isn't working. Samba was started but I can't tu run Swat. I don't undestand what is problem.Plase Help me

I downloaded the DVD images and made via copy /b file1 + file2 the needed iso image on Windows XP Pro.Now I cant make a bootable DVD with Nero or Alcohol 120%Can anyone help pse or may advice which programm to use ?tks in advance

Hi.i'm kind of new to solaris, and i'm wondering how can i make the console behave like a linux console, what i mean is, set colors to directories when listing them(i've seached for dircolors command, but it tells me that does not exist such comand), also i'd like to use the tab key to ...

Hi. I'm not sure if this is the right forum for this question, so my apologies in advance if it's not (and I would appreciate being pointed to the right place).My question is about the speed and efficiency of using TCP sockets vs. other IPC mechanisms (e.g. message queues) to communicate ...

On an Ultra 5 running Solaris 10, I want to start a session of either Java Desktop System Release 3 or CDE and display it on another system running an Xwindows server (running on a Windows box, but I don't think that matters). I also don't want to add a VNC layer to the picture.The network ...

After building all of the necesary prerequsites I am trying to compile mysql-query-browser on Solaris 10 (x86). I am getting some errors (shown below) when I run the configure script for the mysql-gui-common components. Can anyone tell me how I might fix these errors?configure outputchecking ...

I just upgraded my GCC to 3.4 using newly downloaded companion CD. Unfortunately, it can't compile my sources any more., and keep saying "__builtin_va_alist is undefined". Google didn't help me out of this.Now, I reinstalled GCC 3.3.2 using package from Sunfreeware. It has no similiar ...

I've just installed Solaris10 x86 in my PC. I have two disks: No. 1 with WIN_XP and a lot of data.No.2 with only Solaris10 just installed but I can't boot to it. When I reboot the PC it goes directly to WIN_XP. I suppose that it may be because when I installed Solaris, I deselected the 1st ...

I'm trying to compile pygtk 2.4.1 on Solaris 10 (x86) running on myAMD64 workstation. When attempting to run make I get the errors shownbelow. Can anyone offer advise as to how I might get pygtk to compilecorrectly?Cheers,Bernardmake outputmake all-recursivemake[1]: Entering directory ...

Hi All,Is it possible to run multiple versions of Solaris on a server installed with Solaris 10. There is some concept like containers - zones , but what I understood from some readings is that the zones concept is to virtually have different servers on the same server to give different ...

HiI newbie with Solaris and don't know how start kde or xfce.I just installed the free software cd from the sun's cds.Thanks in advance.roberto

I am running a SAMBA PDC on a Solaris 10 x86 machine and using IPFILTER as the firewall. Now my Win XP clients have NO ACCESS to the domain due to ipf.conf file settings BUT MAC and Win2000 clients CAN ACCESS. What the deal with Win XP? Anybody an idea? The following settings have been made in ...

Questions that when a system is in single-user mode:1. Who can login in to the system? Only root user?2. If the network service is still available? Like login to the internet?3. Must system run in Console window, not the GUI window like Java Desktop?Any info would be greatly appreciated. ...

Is it possible to install XP+solaris 10(Duel boot)?

I just want to ask a simple questiondefault shell for root is /sbin/sh, but I find /bin/bash is more user friendly. Is there any harm if I change the default shell for root from /sbin/sh to /bin/bash?

I'm using a server with AMD Opteron 252 CPU and chipsets Nvidia CK8-04, Geforce2 MMX 400.Solaris 10 installation goes smoothly. Except when installation is done and machine is rebooted, this error message appears before loading the Common Environment Desktop:"Cannot take control from Bios. ...

> means redirection of std ouput2> means redirection of std err< means redirection of std inputso, what is the meaning ofsmf::sysinit:/lib/svc/bin/svc.startd >/dev/msglog 2<>/dev/msglog </dev/console&2><> ?

Every once in a while when I boot and then login, Java Desktop refuses to load. I have to use ctl-alt-del and kill the process and use CDE. It gives all sorts of error dialogs about settings manager threads etc. Another reboot and it's fine. Haven't discerned any pattern. Just once and a ...

I cannot connect to the 'Net using Solaris 10.I know the IP address of the Speedtouch DSL modem I have but it gives me network unreachable errors. Same if I try pinging it.I know my DNS server numbers, if that's any help.I've Googled, but everything out there is geared to Linux, which has a ...

I need to configure Solaris 10 to log failed ssh login attempts via the syslog facility. It is not aparent to me how to do this. Is it a configuration parameter in sshd_config or somewhere else?

Is there a way to change its configuration? ...Currently I have WindowsXP installed on partition 0 and Sol 10 on partition 1. The boot menu lets me select between the Windows partition and the Solaris partitions but it defaults to the S10 one. I would like to boot Windows every time unless I ...

HiI've been trying to find a solution to getting a webcam up and running on solaris 10 x86 with java desktop so that I can use gnomemeeting and also develop java video apps using webcams.I have looked everywhere on the sun website about webcams but have been unable to find any documentation.I ...

Has any one heard any thing about sun releasing JASS for solaris 10. This is a handy little tool....

Hi ,I am using Intel P4 processor on an intel Chipset , the installation goes fine , but I am only able to login to the console , the video card has been identified correctly and on kdmconfig , I am able to test my display correctly also . but on reboot I am unable to get a login screen . In ...

I have an HP DeskJet 5650, which I've known to be able to print very well under Ubuntu Linux. Now, however, I use Solaris, and I've been having some issues with it.I use JDS, so I went into Add/Remove Printer Utility from the Launch menu. I entered in the appropriate information as for name, ...