I'm currently in the process of configuring an HA cluster to replace a single machine. The original machine had virtual interfaces plumbed for several different networks, which remote sites connect to for FTP and other data. I'd like to know how to do the same using the cluster (3.1 on Solaris 9 ...

<p>I would like to know where is the ulimit value stored in the shell. And how to get or modify it using the C program</p>

Hi Friends,I have installed Firefox and it is working perfect. Now when i installed the flash plugin and tried to access a flash file embedded html file, it is not working.The error log is as follows:LoadPlugin: failed to initialize shared library /opt/sfw/lib/firefox/plugins/libflashplayer.so ...

Hi Friends,I have installed Firefox and it is working perfect in my Solaris X86 system version 5.10 . Now when i installed the flash plugin and tried to access a flash file embedded html file, it is not working.The error log is as follows:LoadPlugin: failed to initialize shared library ...

<p>I wonder where did 'whereis' command do in solaris. I thought it was not a platform specific uinix command.</p><p>Mahima</p>

Two machines, A, which is Solaris 9 and B which is Solaris 10.Both built by Jet, some months apart with the following as the locale definition.base_config_sysidcfg_system_locale=en_GB.ISO8859-15Both systems have the /etc/default/init set the same, ...

Can anyone tell me what method is best to take all the data from one system : Sunfire V250 to another system Sunfire V125.Using Solaris 8 on the source machine.Planning to upgrade on the SunfireV125 after the restore, to Solaris 10 and all its apps.The only apps installed on the source machine is ...

hello! admin!environment: 2 X E2900 + 2 X Brocade fc switch + 1 X SE6130system:solaris10U2;cluster 3.1;userd MPXIO Two machine hostname:one is systong ,the other is synbak.At synbak execute format is Normal.But at systong execute format#formatSearching for disks...doneAVAILABLE DISK SELECTIONS:0. ...

After a bit of searching I've found this question asked in various places in this forum without having an answer. Is anyone able to help me and the others ...

Ive recently installed Solaris v10 X86 and have two questions. The system is a Dell E521 with 4GB RAM and 1GB SysKonnect NIC, and internet is provided via a cable modem, thats plugged into a Netgear router, and the Solaris 10 box is plugged into the Netgear router via a CAT5 ethernet cable.1. I can ...

I am trying to install Solaris 10 U3 via jumpstart. I would like to set up the server so that it is running SVM after the install. The following profile gets close to what I want:filesys mirror:d0 c0t0d0s0 c0t1d0s0 8192 /filesys mirror:d10 c0t0d0s1 c0t1d0s1 8192 swapfilesys mirror:d30 c0t0d0s3 ...

Hi All,I've been tasked with doing a storage assessment of our Sun servers. We need to find out the following from our servers:1. Largest files2. Duplicate files3. Total used space4. Total free space5. Files not accessed in over a year6. Files not backed up.7. Output should be easily put in a ...

dear all,i am new in sun system & i have sun sparc 20 with external HDD 9GB .this HDD faile & i replace it with the new one HDD 18GB & format it as the old one for (/var , /usr2, /usr4) and i restore usr4 & usr2 successfully & /var but when I make a reboot & making df k I ...

dear all,i am new in sun system & i have sun sparc 20 with external HDD 9GB .this HDD faile & i replace it with the new one HDD 18GB & format it as the old one for (/var , /usr2, /usr4) and i restore usr4 & usr2 successfully & /var but when I make a reboot & making df k I ...

Hi,I have a Solaris sparc 5.9 setup. When I give the command crontab -e, instead of opening an editor the control comes to the next line with 0 displayed. Then I have to use CTR+Z to come back to the prompt. The have pasted the screen shot of the same:$ crontab -e0^Z[2]+ Stopped crontab -e$Kindly ...

<p>hi</p><p>on a solaris sparc 9 environment <b>mailx</b> command is unable to send mails to the outside world. What could be the reason & needs to be checked?</p><p>thanks</p>

I have a question regarding memory and swap calculations in Solaris.I have box that has 2GB of RAM and 3GB of swap. I use ps command to check how much memory each program consumes. When I sum results I get numbers those are much smaller than memory and swap sizes: sum of the total size of the ...

<p>Hi,</p><p>Good day !!!</p><p>Is there any chance of data corruption of the tape drive or the hard disk if I apply metdetach in the multi-user mode and take a backup of the detached hard disk ?</p><p>Thanks</p><p>Shamim A M Zaki</p>

<p>Hi , </p><p>How do we can configure Dynamic DNS server on Solaris 10 OS , in Linux boxes we can use "dnssec-kegen" and associate with dhcpd.conf , how like same we can do with solaris ,</p><p>any help will be highly appreciable </p><p>Thanks in advance </p><p>Kinshuk</p>

Dear all Oracle malfunctioned on Sun Cluster 3.2 running on Solaris 10 , and try to failover few times and after i dont let be restart resourse group .i tried to change Pingpong_interval but was giving me the following errorsJul 22 00:21:50 PR5 Cluster.RGM.rgmd: [ID 674214 daemon.notice] rebalance: ...

Hi,First and foremost, I hope that this stands in the right place. I'm new to these forum, and seen the fast that this is not high performance networking, I have put this here. I hope this is right?Now to the point. I have just installed solaris 10 as my first non windows OS. Perhaps this was not ...

Hi Guys,Need some help please, setting up a new server SunFire V240 with Solaris 9 SPARC.Only after setup complete have I realized that the passwords for all users, including root, can accept any digit as a replacement for any numeric value that exists in their passwords.E.G. If the password is ...

hi people,i need solaris 9 installation cd image ver. 12/03 and/or later but i can not find it any where. i need to reboot the system in single user mode, make some changes to driver_aliases file and reboot the system but of course in order to do this i need solaris 9 installation cd which i don't ...

<p>Hi All,</p><p>I have 2-node Sun V880 database cluster in ORACLE 10g RAC. Now i want remove V880 Server from Cluster and add new V890 Server in to that. Is it possible? Cluster combination of Sun V890, V880 will work or not. Please suggest me.</p><p>regards</p><p>BVB Kumar</p>

I've had this problem on several other Sun based browser products. Sun Managment Console does the same thing to me. Basically I've installed the cluster portion of the Java Enterprise Suite. I try to launch the admin console using. http://mynode:6789and the browser wants to download a BIN file. ...

<p>hi, I am newly to solaris, i just install solaris OS from DVD, anyone can tell me how to run a exe file on Solaris? because many application or driver need me to run exe file to run or install.</p>

Hi All:I've been away from Solaris for a while, so sorry for the dumb question...I installed Solaris on an x86 box, configuring it to use DHCP. (SunOS unknown 5.10 Generic_118855-33 i86pc i386 i86pc)The host name is coming up "unknown". Is there any way to set the host name on the DHCP interface? ...

Hi, yes I know what you are thinking, you should definitely set up IPMP before doing the cluster install. But, what if you didn't. SC3.2 and Solaris 10 06/06I just set up a single interface group on each node, but scstat does not show IPMP groups set up, it actually looks like this:-- IPMP Groups ...

Hi,I want to expand my root partition which is extremely small (4Gb). I installed some programs and I am almost full. The home directory is far to large for my needs (92Gb). What would be the simplest way to do this. I am quite new in Solaris. Or do I have another method to install new programs ...

<p>Hi everyone</p><p>I can't install the driver,which the system notes me that:the driver havn't attached.</p>

the init process on a solaris box is using 20% CPU. I am not sure whatit is doing. truss output shows it is looping. Could someone explainthis section of the truss output:setcontext(0xFFBEF318)Incurred fault #6, FLTBOUNDS %pc = 0x00031D04siginfo: SIGSEGV SEGV_MAPERR addr=0x0000000CReceived signal ...

hello to everyone! :) I' ve installed Solaris 4 days ago and I really need help , I m confused! : S . .. where can I find driver for my integrated sound card CMI9880 e and first of all how can I install them since I did not manage to find in the terminal a command line like the .\config or the ...

Hello,I wrote a script to check the version of Firefox and update it if its older the 2.0.0.5.It seems that -lt, -gt, or -eq does not look at anything after the first decimal. So, if my current version is 2.0.0.4, Firefox does not get updated.The portion of code that is giving me a problem is ...

I connected two systems with a crossover cable for Oracle 10gR2 RAC like below commands.systemA> ifconfig bge1 plumbSystemA>ifconfig bge1 192.168.2.101 netmask 255.255.255.0 upsystemB> ifconfig bge1 plumbSystemB>ifconfig bge1 192.168.2.102 netmask 255.255.255.0 upThe I connected with a crossover ...

Hello Genius,We ve written the coding in java swing for hotel billing projectwe ve done all the things. our billing size s 4''x4''after printout we tear off the paper bt giving nxt printthe page jumping upto 1.5'' then print we ve to avoid how to avoid page feeding we checked all printer ...

I was shipped a V240 from another office. I don't have the root password or the ALOM password. I figured there would be simple documentation from Sun on resetting the ALOM password so I could get to the ok prompt to reboot the computer. Unfortunately most of the ALOM documentation indicates ...

<p>Hi</p><p>I've tried searching the forum about "Project Janus" for running linux apps</p><p>under Solaris but i found only posts from 2004 year.</p><p>So, what's going on with this project and is it ready yet or am i missing</p><p>something ?</p><p>Thanks in advance.</p>