Like Hp-UX, make_tape_recovery command can take complete Operating system backup. I want take similar type of backup in solaris. Can anybody suggest on this.

Hi all!When I have just finished setting up Solaris 10 on my PC (x86 - Intel), I realized that the X-Windows is not a part within CDs. Anh I do not how to download them, exactly, I do not know about their address in Sun website. Would you like to guide me?Thank you very much!Message was edited ...

There don't seem to be any dhcpd patches in the 6/27 9_Recommended patch set,but were getting "Bus Error" messages in starting in.dhcpd. Even in debugmode, this is all that's printed.System (Enterprise 4500) had been up for about three months, with nointervening patches. Anyone seen/solved ...

I just took the plunge wiping my system to install Solaris10 to familiarize myself with it and evaluate it's approprietness for a couple of projects.I've had linux running successfully on the system just before installing Solaris10 so the hardware should be functioning.Now after the Sol ...

Sun Cluster 3.1 is working on 2 nodes, I want to add one more node to this. Can anybody give installation procedure and explain to me how heartbeat will work for more than 2 node cluster.

Hi,I have recently acquired a Dell XPS210 desktop machine on which I was hoping to make a contribution to the OpenSolaris community. I have spent 5 days trying to install 4 different flavours of Solaris, all to no avail. These are:Solaris Express Community Edition v11 build 67Solaris Express ...

Hi,Has any one installed cluster 3.2 on 2 nodes with one local zone each, when oracle is running on the local zones.1. Where to install the oracle binaries? ( Global or local disk)?2. How to define the Storage res-group for the zones (HAStoragePlus)?3. Is any one has all the steps to a perform ...

Hi there.I noticed a bug in fgrep (SunOS 5.9 Generic_118558-30 sun4u sparc SUNW,Sun-Fire-V890). This one bothers me a bit: If I use a fgrep -f and giving a long list of patterns (here 17000 stored in a file, each line 1 pattern, Size 300kb) the result is sometimes (not eachtime) faulty. I would ...

I am a new user of sun solaris 10. I am using sunfire 280 for test. I am trying to install Quantum DLT7000 tape backup device to my sun fire. Is there any one who can tell me how to do it step by step? Thank you very much.

hi,top command shows that the swap is too low (57G in use 382M free) and at the same time, the memory is at ease: 32 G real and 13 G free.is it possible to have a low swap while free RAM is ok?thanks.

Dear all I have Sun Cluster 3.0 running on Solaris 8 , i want to upgrade Solaris 8 to Solaris 9 , without touching cluster Is it possible ?Regards

Hi,Sun are here helping us build a 2 node cluster on V245s, solaris 10, Solstice Volume Manager,Cluster 3.1 using EMC CX700s for disk storage. Everthing appeared to be Ok until we tried to sync the disk sets across sites. Some disk sets worked Ok ,others never got past 0% and gave the error ...

hi,OS: Solaris 10 11/06SOFT: Sun Cluster 3.1u4system disks of both nodes has raid1.after 6 monthes i've found that /global partition is not in raid and mounts as partition of first disk and etc.is it possible and how to migrate two partitions to raid1 of every ...

Hi,I installed Solaris 10 11/06 on x86.My server has an active usb to ps/2 adapter on wich i connect PS/2 PC keyboard and mouse.I've updated xorg to 7.2 with solaris packages.my xorg.conf :Section "ServerLayout"Identifier"X.org Configured"Screen0 "Screen0" 0 0InputDevice"Mouse0" ...

Hi!I can successfully create Solaris packages using build variables as shown in the following prototype file.Please note that I may use the build variable $VersionTAO within the path.!VersionTAO=1.4.5f none usr/tao/lib/libTAO.so.1.4.5=/usr/tao/$VersionTAO/lib/libTAO.so.1.4.5But when I replace ...

Solaris Express Developer 5/07 5.11 x86 install Asus P5RD2-VM Seagate drives:Disks c1d0 c2d0 Solaris configures via installer c1d0(boot) allowed to use entire drive.Disk two c2d0 is already configured with Bootloader (/dev/sda) sda1 60 gig ext3 (Ubuntu) sda2 1 gig swap remainder sda3 fat32 for ...

We are having problems with reverse DNS resolution for our private IP addresses.We first noticed this when our syslog-ng was not displaying name in the log entries, but rather IP addresses.Nslookup and dig reversed resolved the addresses fine, so we don抰 think the issue is in DNS.We further ...

Hi AllI get this error on compiling. Any idea what this is and what needs to be done to fix this.Thanks in advance.Regards

Hello,I have a setup in Solaris 9, where in a multi threaded java program triggers mailx command to send emails."mailx" command is executed using Java's Runtime.exec() method. Now the problem is, out of some 100 mailx command that is triggered, atleast 4 or 5 mailx command hangs. i.e., when ...

Hi,I'm trying to find out the which process is using port no 8010 If i do a ps -ef, then it displays all the ports, if i do a netstat then i get the open port, Since these two doesn't have anything in common, I cannot relate both.(If PID was there in netstat, it would have been easy)In ...

Apparently the new release has a couple of things I have difficulty with at install. These issues are not in the previous 2/07 release:1) 5/07 installs the NIC with DHCP active and no way can I get the static IP address to stick even tho' the various utilities and files call nge0 address at my ...

The missing files on Companion Dvd SFWgprnt SFWhpijs SFWssl. .Why include a package that can't be installed (complete) in the Companion Dvd?Can anyone advise where the remaining packages might be obtained?I tried the openssl from http://sunfreeware.com/openssl-0.9.7g-sol10-intel-local.gz but ...

All,My SUN box is v440 and using SUN5.8.In one of my apps, there is 'ulimit -nS 1024' value in scripts.What I want to know is where the value of user's limitation in configuration files ?Or how could I do that ?In linux, it seems to be set in /etc/security/limits.conf file. right ?If so, ...

Hi,My requirement is to work on ORACLE 10g Database using Solaris 5.8. I want to know whether it will work successfully in the long run or what is the best version of Solaris which can be used with ORACLE 10g. Thanks

how t ochange the default umask value. umask commands changes the value only for a perticular session. Which file(s) must be modified to alter default umask during boot time. I dont want to write anything in .profice or .bashrc. I want to change the umask before that.

Hi all,I mounted the directory containing cluster 3.2 but can only see the features for cluster 3.2. I download the right "cluster3.2 zip" file.Could someone give some directions?thank you, peter

I've seen refrences to SC 3.2u1 on sunsolve & have noticed some patches were released for SC 3.2.Looking on docs.sun.com I can't find any release notes on it (only for 3.2): http://docs.sun.com/app/docs/doc/819-6611?q=sun+cluster+3.2u1&a=expandThe docs on docs.sun.com say that there is ...

<p>hai </p><p>i am installing solaris on server .</p><p>i do not have sun keyboard .</p><p>and i want to come out of installation</p><p>can anyone suggest solution</p><p>thanks </p><p>priya</p>

Hi all:2 nodes and 7-30 databases. Start in 7 databases and grow to 30. So I guess I need 7-30 resource group, 1 per database.This 7-30 are spread in both nodes. If 1 node fails, databases switch to the other node.Which is overhead of switching 10 oracles resource groups, for instance? Could it ...

<p>Hi guys!</p><p>Does any one knows what is the quick way of getting ls -la output in solaris? I worked with HPUX for 8 years and used " ll " command for that. Now I am having problems in solaris with this command ( force of habit).</p><p>Thanks in advance!</p><p>MK</p>

HiI installed solaris 10 on my dell optiplex 740It has NVIDIA(R) Quadro(R) NVS 210SiNorth BridgejAnForce 430iSouth Bridgej display.But it is not in the list of supported ones for solaris 10-> http://www.nvidia.com/object/solaris_supported.htmlHow do I make the display work for this?Thanks in ...

Hi,I've got a program running 5 differents threads.On my local machine, each thread is running in the same time that the others.On AIX, I can see that all CPUs run the diffferents threads.But on Solaris 5.8, it seems that the java process used only one CPUMy server :Solaris SunOS 5.816 CPU ...

Hi alla newbe question regarding Sun-Blade-150 with solaris 8:I have to mirror with SDS my existing disk that is a Western DigitalWD400BB (40.0GB - 7200 RPM UltraATA/100).my supplier told me that disk is no more avaiable and proposed me tobuy a 80.0GB disk of the same model.If i buy th 80.0GB disk, ...

<p>Will an equivalent patch to 121309-09 be released for Trusted Solaris 8? If not does Sun Alert 102903 apply to Trusted Solaris 8 and SMC 2.0? Thanks.</p>

hi all,i have installed solaris 10 on my intel pc.everything is fine instead my cd samsung make cd writer i am not able to mount.whenever i put a cd into it and loads the tray. it ejects automatically after 3 seconds.i treid stopping vold. and manually mounting cd rom but it did not help.when i ...

<p>Is run level 0 (the ok prompt) the best "place" to be when powering of the box (Sunfire V280) ?</p><p>Thanks</p>

Since today morning I have been facing one error on the console of Sun Fire v890 server which is related to Kernel.Below you find the errror messages:Jul 12 12:38:13 nus620 unix: /platform/sun4u/kernel/misc/sparcv9/sbd: undefined symbol 'sbdp_portid_to_cpu_unit'Jul 12 12:38:13 nus620 unix: ...

HiI am doing DS 5.2 migrate to DS6.1. I have DS5.2 and messaging server 6.2 in cluster environment. I am OK with migration process but how to replace existing ldap resource in cluster with the new setting. My messaging resource is dependent on ldap (5.2) resource. I would like to add new ldap ...

Unable to start X. Went through the text-based installation, everything else wentokay. After installation when booting, X windows start failed again and complainedabout vesa driver. Build: SXDE build 64a. Machine: dell latitude D630 with intel 965integrated graphics. Wondering if some patch needs ...

<p>Hi </p><p>Can any one tell me the merits and deerits of the x86 and SPARC</p><p>Thanks</p>

<p>Hi i need Jre 1.5.0_11 for my sparc 64 bit bit solaris system .Can any one provide me the link to download the same</p>

Hi all, I just completed a fresh installation on an Enterpise 3000 that had Solaris 7 with 10 disks. Only the disks with the OS got mounted by the installation process, and I cannot figure how to mount the other disks. I have manually added the entries to vsftab but am hessitant to modify mnttab. ...

<p>I am planning to migrate a 2-node cluster from VCS to Sun Cluster. how much downtime does this involve? is there any documentation that i can reference?</p>

Hello all! I am new here and also fairly new to SUN hardware. I have an E450 that I am playing with, but I can't get it to power up. I have a sun keyboard and mouse hooked up along with a sun monitor. When I flip the power supply botton on the back to on there are some green lights that light up. ...

I have a client that wishes to extract data from tape. The tape was produced using cpio commands on an unknown unix machine. The tape is a SLR5 4/8gb. The client purchased a drive for me. I installed the drive on my compaq deskpro En series PII/400 . The drive is scsi, and I connected it with an ...

<p>Dear all!</p><p>My PC has only one HDD, but some time, I need the Windows XP to do my private working, and so, I do not know how to set up Windows XP and Solaris corresponding within my PC? </p><p>Thank you very much!</p>

<p>Are there patches for sxde somewhere around? Or do I just have to install the solaris 10 patches? the update manager doesn't work on my system, though every other java application which connects to the internet works, so I have to install them manually.</p>

hi there,need your help.i run #volcheck when i'd like to detect the mounted floppy disk.what about usb thumbdrive? wud like to mount it and access it but i cant see is when i run df -k.please help how i can mount my thumbdrive and the files on ...

Hi everybody,I am trying to install SOL10 on a SUN V120, and the installation goes well, CD1 finishes with install complete, then reboots and asks me for CD2 but once CD2 inserted I get error messages:"Error for command : read(10) --FatalRequested block : 10207Error blockVendor : TEAC Serial ...

<p>Hi,</p><p>We have Solaris 9 with the Sun cluster 3.2 and the Netbackup application is 5.1 MP4, now we are planned to upgrade the Solaris version form 9 to Solaris 10.</p><p>Could you please provide me an Idea How to upgrade this?</p>