Hello,as I wrote in the subject my SUN V210 hangs after "Hardware Watchdog Enabled" on boot. If I want to shutdown the system with the "power button" I am getting the message "WARNING: Failed to shut down the system!"..This failure occures after I mounted the harddisk in another hardware ...

After upgrading from Solaris 9 up to Solaris 10 with Oracle 9.2.0.8 we've got performance degradation. %Sys time doubled. Database has almost 70% writes , very intensive application. Smth about 100G SGA . 278 G phys mem and 136 CPU-s on SF25K. Everything is bad. Coming back to the old Solaris ...

I have 3511 populated with 400 gb HDD. Now i have created 2.9 TB filesystem. the filesystem shows full with 500 gb of data. I found that the inodes are full. So please suggest me a way so that i can get full access of the file system 2.9tb and i want it as a single filesystem. So what options i ...

Hello Experts,Is it possible to install two different Sun Studio versions on the same machine?i'm working on Sun Solaris 8 (UNIX) and have already installation of Forte Developer 6 update 2.And I would like to install (separately hopefully with no conflicts) Sun Studio 9.Is it ...

Hi,I recently went to a fielded system to do some work on our Sun boxes. Long story short is that I installed patches from the Recommeded cluster from the 4/13/07 timeframe, and after the reboot both of my Sun boxes got in a state where the screen was blank with a black background. During the ...

Hello all,I'm a bit disapointed, I've just achieve Solaris 10 x86 u3 HW 11/06 installation on my new Dell Precision M90 successfully from the DVD and it does not boot, I can only boot in Solaris Failsafe.Using "kernel /platform/i86pc/multiboot -kd" option, and ":c" command in the kmdb, the ...

i can not install Solaris 10 because my disks label is EFI instead of SMI. I found solve of this problem in archive, i know i should change the label by format -s but it is impossible because when i attempt i receive message "no disk found". Do you know how i can change disks label in other ...

Newbie question!I have set up a Sun Fire v245 server which will be used as a test server. This server came with Solaris 10 preloaded and also equipped with components from the Java Enterprise System. To the point,Every time my users login they get a message that says "JESv4 Message of The Day ...

Here's the situation.I've got a sparc machine that I'm trying to install Solaris 10 on. I've verified the equipment in the approved hardware guide, so I'm not worried about that.I get through the installation process and am asked to reboot without a single problem. The problem occures ...

Guys i wanna mount ntfs drive to my solaris system....Anyone can help me to do that task....It is very much needed to me... Thanks for viewing...................

Greetings experts,would you please help me to acquire a better understanding:1. In SC 3.0 and SC3.1 SCSI-3 PGR is used in a 3 nodes cluster for both, the DCS and the QD disks (in a 2 nodes cluster traditional SCSI-2 Reserve is used for DCS and PGRE for QD devices)2. In SC 3.2 the same applies ...

hi, I'am triying to install solaris 10 on a set of new servers, installation goes smooth, screen shows perfectly, and graphics are apparently ok, however, on the first boot, the computer freezes on the login screen, we get a black screen with a thick pink line at the top and it freezes.Also, I ...

Hi,i have problem with network interface bnx0 on solaris 10 on DELL BLADE 1955. I install new solaris 10 to machine, install drivers for network card. Configure network interface bnx0 on /etc/hosts, /etc/networks, /etc/defaultrouter, /etc/hostname.bnx0. after reboot, is interface bnx0 ...

Dear all I have 2 boxes ( V880, E3500 ) both are connected to Multipack , which i want to build cluster later . unique scsi-initaitor as been setup , both system cannot see multipack for troubleshooting i connect only V880 to multipack and use terminator at other end , i can see multpack at Ok ...

Hi,We are installing Oracle10g RAC with Oracle clusterware with ASM on Solaris 10. Does anybody have a installation/configuration manual for this combination. Thanks,Murtuja

I have a two node cluster with an attached disk for quorum. The systems went down and the device that I had quorum on lost all of its data. Now the systems are sitting at the boot screen saying they cannot get quorum so they won't boot. I tried to do the amnesia recovery, but the system I ...

Hi,I am attempting to install solaris 10 on a v245 from a flash archive created on a sun v240 and it fails with the error:ERROR: Postdeployment processing failureAnyone have any ideas it there is a problem going from a 240 to a 245?Thanks,Darren

Hello everyone,I apologize for asking what is a very FAQ, but I am unable to find an appropriate answer anywhere on the interweb.The facts of my unfortunate situation are:1. I am a newbie in the SA world.2. I am even more of a newbie in the Solaris world.3. I am administering a Production ...

Sorry for the noob question. I inherited a Sun Fire V240 as part of my network and have little Unix experience. I have been able to get by managing this system via SSH but are increasingly in the need for some GUI. For example, the APC Network Shutdown app for Solaris requires it runs from a ...

hi,I am trying to upgrade from solaris 9 -> 10. Part of the process we use is to use the solaris 10 binaries and point to solaris 10 libraries. Issue is: they cannot seem to be running and i was wondering whether this is because we are still running on sol9 kernel. This process has worked ...

Hi --just for kicks, I was trying to install Solaris 10 (x86 natch) on a SuperMicro H8SSL-i board. It uses the ServerWorks (Broadcom) HT1000 chipset for its SATA interface. But at the initial device detection, I get a failure at the PCI detection, IDE reset, etc.I thought from this HCL entry ...

when i try to create LV with RAID 1+0, after creating 20 LV, 21th LV show some error with same command.[code][b]smscsrv01 #vxassist -g historydg mirror lv_hisdata24 historydg_3 historydg_5 historydg_6[/b][/code]vxvm:vxplex: ERROR: Volume lv_hisdata24-L01, plex lv_hisdata24-P01, block 1328867: ...

Hi all,I downloaded the images of Solaris 10 form Sun, burned them and installed...it all worked out well and now I have dual boot XP and Solaris. On the first boot, it asked me to register with Sun the software and some stuff then I realized that I couldn't manage to get connected. I'm using ...

HelloI have a non-STREAMs based character device driver. I want to implement my own xxchpoll() routine.As per the man page of chpoll(9E), if anyyet is not set, the driver must return an instance of the local pollhead structure.... In which routine (xxattach, xxopen etc) do I store this local ...

Dear gurusI wanted to run Oracle 9i and Oracle 10g R2 in same cluster ( two node ) , in different Resoures Group .runnning on Solaris 9 the databases are quite small in size Is it possible to do , any hint will be helpful Regards

HiI have setup a two nodes cluster with sun cluster 3.1 u4 on sun v890+StorageTek6140.On the cluster runs oracle RAC with oracle 10g+clusterware.When all thing finished ,I mirrored the bootdisk with SVM on the nodes,but during boot in solaris,it panic like this:Jun 23 15:14:37 hisa ...

I am wondering what is considered as best practices related to adding more storage devices. I have a Solaris Cluster 3.2, a failover resource group with a SZBT resource and a HASP resource for the zone root path. Now i have to add more storage devices (for Oracle to the zone). The additional ...

Please check it for mewhat is the key to make me crisisroot@cdwprod # ps -eo pid,pcpu,args | sort +1n0 0.0 sched1 0.0 /etc/init -2 0.0 pageout74 0.0 /usr/lib/sysevent/syseventd 387 0.0 /usr/lib/picl/picld 466 0.0 /opt/VRTSob/bin/vxsvc -r /opt/VRTSob/config/Registry 499 0.0 /usr/sbin/rpcbind 522 ...

Hi, I have two node cluster 3.1 and VNBU .while adding drives in L500 tape library.The primary node detects the new drives.and driver for VNBU ,sg drivers also built.but in secondary server we are not able to get the drives in VNBU (sg.conf) /kernel/drv/sg.conf.If any one who has worked on ...

hi,i need help with solaris 10+san. On one server with solaris 10 i connect lun from san. I dont now as...maybe. On new server i need connect new lun...have anybody step-by-step manual for this?on solaris on sparc i dont have problem, or on solaris 10 is big problem...help ...

Hi all,I have installed SMCgcc 3.4.6 on solaris8.But when I execute gcc, I get the following error:ld.so.1: gcc: fatal: libintl.so.3: open failed: No such file or directoryKilledldd -d gcc gave me the following info... libintl.so.3 => (file not found)libiconv.so.2 => (file not ...

Hello Sun Guru's,I need sun guru's help , I am oracle DBA and the sun administrator has left the company with out knowing the cluster console login details.In my enviroment I have got two clustered nodes and I have got the root password for both of them.After opening the cconsole it says ...

Hi.We have a Dell 1950 from last August that we need to install Solaris 10 on. It has a Broadcom NetXtreme II Gigabit Ethernet network card in it and is attached to a gigabit switch. We have the latest drivers for the Broadcom NetXtreme II card installed on the server.After installing Solaris ...

I just got a Sun Ultra 40 M2 Workstation.I'm using the workstation to run a Java SE application that has clients connect to a serversocket using my static IP address.I have the system currently set up and running on my windows xp pc.So I have all the info from my ISP and I hooked up my int to ...

We are currently running the Sunfire X4200 M2 and need to drastically reduce the amount of noise produced by the fans. The room that this system runs in is hardly bearable. What methods may be used to dampen / eliminate this sound?

Hi!I have installed Solaris 10 in my PC: Indel duo core, 512 MB RAM, and 160 GB HDD. I have sound card of Creative.But I cannot access my sound device. The solaris says the it cannot find any sound device.Please someone help me solving this problem.

I'm trying to back up my entire 880 machine running Solaris 10. I've tried using flarcreate and have looked into ufsdump. ufsdump appears to be the easiest route to go, but I'm a little confused when it comes to specifying exactly what you want backed up. In all of the examples a specific ...

I have added a route byroute add 10.224.36.0 -netmask 255.255.255.224 10.224.18.1I can even ping to that IP. However when i do a traceroute it gives-->$ traceroute 10.224.36.1traceroute: Warning: Multiple interfaces found; using 10.224.8.152 @ ce0traceroute to 10.224.36.1 (10.224.36.1), 30 ...

Couple questions... Im running Solaris 10 on an x86 system1) My audio is Realtek High Def Audio (on board). On their[Realtek] site they have several unix based Drivers that are said to work with Solaris... But which ones?Listed on their site is Others, Linux(Kernel version 2.2.14 or 2.4), ...

CORE4007: Internal error: Unexpected Java exception thrown (java.lang.OutOfMemoryError, no description), stack: java.lang.OutOfMemoryError Can u pla provide me the solution asap?

Hello all!I am a newbie with Solaris, please help me to resolve this problem following: I setup successfully Solaris 10 on my PC, during the processing, I did not choose value option for DHCP (Option No), then, the host name was unknownI set the name for NFS as Ora9i. But when my Solaris ...

Hello.Could you Help Me?1.Is there a C++ Compiler on Solaris (CC) already installed?How can i Use? I always got the following message when i try:"/usr/ucb/cc: language optional software package not installed"2. Is this a PATH problem? How Can I permanently Modify my PATH? Which is the file and ...

Hello,I磎 looking for tha best options of free antivirus for Solaris Express Developer Edition. Can anybody tell me?

Dear all,We are testing two of our servers for mq series connectivity. The scenario is, when one machine is shutting down it抯 services there are some scripts that do a dns update, which removes the ip address and relates it to the ip address of the other node on our dns server, and the update ...

Dear all!My PC, x86, memory is 512MB and CPU is Pentium 1.8GHz on which I installed Solaris 10, but when I finished the installation, I could not use the GUI, instead of, only console logging with root/password. How do I can use the GUI - XWindow?Thank you for your ...

Hi All, I am in the middle of a rather picky situation. Can anyone tell me if using a global file system( Enabling global via vfstab ) on a cluster running RAC is recommended? I know the effect it has on the interconnect but i am going through lots of debates with my DB admins saying they need ...

I have got a problem with the installation of Solaris Express, Developer Edition 5/07 on an x86 system. I intended to have three partitions: 1) FreeBSD 2) Solaris 3) WindowsXPThe partitions were created and sized using fdisk on FreeBSD. The installation runs perfectly well unto the point where ...

i just got my ultra 40 m2 workstation and have got my int working and downloaded and installed my jre and libraries for it that i need.but the problem i have run into is with the updates.i am using the update manager to download and install all the updates for solaris.there were 122 at first ...

Ive tried running the avaliable x86 Flash Player 7 for Mozilla, Ive also tried copying the files to foxfire's plugin directory... neither browsers will display imbeded flash, eich informs me a plugin is still required.Has anyone had this problem or know a solution to ...

I want to use the function setenv and unsetenv in my application, but I found the couple of functions only be implemented in the libc.so.1 on solaris10. ( I did not find the implementation in libc.so.1 on solaris9)Currently, I must use the above functions both in solaris9 and solaris10, so I ...