Hi All,What's the diffrence in controling cpu-shares (FSS) from the zoneconfiguration (zone.cpu-shares) and doing this from thecluster framework for the resource group ?Which method is the recommended one in this case?(Sol10u3/sparc ...

Server just upgraded to Solaris 9.Why am I getting this message now?rm: cannot determine if this is an ancestor of the current working directoryI have a large number of scripts that use "rm -fr" to remove temporary directories, which is now not happening.

I have a Sunfire V245 that was running on Solaris 9 (very stable). I upgraded to Solaris 10 (6/06) this morning and everything seemed to go smoothly. After the upgrade the system rebooted, but will not boot. I get the following uptput;Rebooting with command: bootBoot device: disk File and ...

Hi all,Please help, while creating the file system using Volume Manager, it gives an error - Line in vfstab has too few entries. And it wont create the mount point. Please help, what does it means?Thank u in advance!!:-)

I am new to solaris. My prob is as follows:I have 2 hard disks, one 40gb and another 160gb.Hd1 has 3 partitions.Hd1p1 : win98Hd1p2 : WinXpHd1p3 : Back-upHd2 has 4 partitions of 40gbHd2p1 : LinuxHd2p2 : back-upHd2p3 : FreeHd2p4 : FreeI want to install solaris on Hd2p4 and boot it using a 3rd ...

I have Fedora core 6 installed on a desktop. I need to install Solaris 10 also in a dual boot. I have 2 hard drives. Fedora core 6 is installed on the first hard drive. I'm just looking for the easiest way to do this so that I may practice learning both operating systems. Any help is much ...

I am new to UNIX (Sloaris 10 for x86 platform)I have a problem that I can't surf internet. However I've done the installation steps well.In installation I entered host name , system IP address, router IP address.I can ping my router but everytime I've opened mozilla browser I see message ...

Hi, anyone know where i can get solaris driver for intel 3945ABG wireless card for my laptop? or atleast how i can work around it. Please help

Hi everybody i recently install this O.S. to my notebook. The installation goes well but when i enter in a new session some devices doesnt work such like:ethernet device : Marvell Yukon 88E8036 PCI-E Fast Ethernet Controller sound device: Intel 82801GB ICH7 - High Definition Audio ControllerSo ...

I was trying to aquinted with Samba on Solaris, I downloaded the latest samba software from http://samba.org , used the gunzip command to convert to tar, and used the tar xvf to extract it. and then I did the following# cd samba-3.2.2# cd source#./configurethen i got an error that the system ...

Hi, I have a problem identifying how the wtmpx log being trimmed / null daily.Everyday the output of 'last' command only display the login of the current day not the previous days.How could I set that daily the wtmpx file is being copied to other file such as /var/adm/wtmpx.0 Fyi, OS: Solaris ...

Hello,I'm trying to implement the method of John Howard's paper "Customizing the JumpStart Boot Image for Recovery" written in 2001in order to add our restore software in the boot image. While this perfectly works with Solaris up to version 9, the SMF approach in S10 changed this ...

Hi everybody !!! I'm a newbie in Solaris 10. I had some problems in installation Solaris 10:I downloaded installation packet for x64/x86 (DVD) on site Sun.I want to install Solaris 10 on my PC AMD 2500+.I connect to internet through a LAN. 1)In process installation, some steps for configuring ...

Hi all!I try to install SC 3.2 on Solaris 10 x86 but get strange error# cd /pathc_to_SC_3.2_distribution/Solaris_x86# ./installerThe installer you have invoked can run only in Sun platform. Please invoke the installer for Solaris_x86 platform.I try to download SC 3.2 for Sparc platform and ...

Hi,we have a replicated filesystem /data, but I want to avoid a directory /data/tmp to get replicated to its standby machine.Is there any options availble to do this?

Hi, thanks in advanceI'd like to create a new file system for dump more than one and half million files.I can't create an ufs file system but when i begin to restore files in this i found a problem "inode-table overflow".I've reviewed my backup if i try to restore only less than one million ...

I have installed on my Dell Latitude D820 and I cant boot into it, as soon as i select "Solaris 10 6/06 s10x_u2wos_09a x86" the pc just reboots and goes back into that dual boot screen. Im new to Solaris and I have no idea how I could fix this. Please helpI have partitioned my HDD into two ...

Hi,I setup a Solaris 10 x86 /1106 jumpstart server. I was able to install a Dell Latitude D420 using this jumpstart server. However if I try to install another x86 machine the booting process hangs after fetching the correct IP from the DHCP server. the last line istTFTP....and after timing out ...

Hi,I am getting the following messagesApr 3 01:02:42 asad SUNW,UltraSPARC-II: [ID 676844 kern.info] [AFT0] Corrected Memory Error detected by CPU3, errID x0003d9ea.9e8a595cApr 3 01:02:42 asadAFSR 0x00000000.00100000<CE> AFAR 0x00000000.15297668Apr 3 01:02:42 asadAFSR.PSYND 0x0000(Score ...

I have a three node cluster with a quorum disk attached to two of them. This makes number of quorum votes = 4. It is my understanding that there should odd number of votes in a cluster. So I would like to increase the number of votes assigned to QD to 2. Is this possible? If not, what are the ...

I have dual boot system. How do I connect in Solaris the above modem that I use in windows to connect to Virgin ( ISP)?

Hi,After changing a new host name in Solaris 9 of a server, I found out that the files /etc/ssh/ssh_host_rsa_key.pub and /etc/ssh/ssh_host_dsa_key.pub still contains of old host name. I believe it should contains new host name instead of the old one. How do I go about it to make the changes in ...

I want to be able to log on as root over the network - enabling this used to involve renaming or removing /etc/securetty, but this file doesn't exist in my newly installed Solari 10. How is this managed now? And where can I read more about these 'deeper' aspects of the system (such as where ...

Hello there.Any drivers out there for intel pro/wireless 3945ABG for Solaris 10?

Hi - I got a Sun Fire V445 and SUN sent me the Solaris 9 media 9/05 which P/N for the installation CD is 705-1542-10.When I run a boot cdrom in the OBP, I get a boot cannot open kernel/sparcv9/unix v445 error.It seems that I should download 9/05 HW from sun, but could anyone confirm that the PN ...

Hello, I'm new to solaris, I need to install solaris 10 on a sprac2000 box. I don't know any of the commands to do this can some one tell me how to get this going?

In a lab cluster I restarted a node that is attached to a SCSI RAID (using 'reboot' command). After it came back up the cluster file system is not visible and mountgfsys service is in offline state and stuck in start method? What could be wrong?# svcs -xvsvc:/system/cluster/mountgfsys:default ...

Hi,We have just migrated from Solaris 8 to Solaris 10. In doing so we have had to bring over our informix instances etc.In the process we have broken the ability for the database to execute:"sudo /usr/sbin/useradd ...""sudo /usr/sbin/userdel..." and various other unix commands.This works fine ...

Hi all guys. I am new with Solaris... and sure I have some problems!!!I just installed Solaris on my MacBook. More precisely on an external usb hard-drive!The installation run well......but, after the reboot I realized the Solaris didn't recognize neither my ethernet card,nor my airport, nor ...

I hate to sound like a newbie, but I am one when it comes to Solaris. I'm having some difficulty installing. I can get to the point where it copies the files to the swap partition that it makes and asks me to reboot. Once I reboot, I load the Active (#1) partition, and it takes me to the setup ...

Hi All,I'm using clustered zones and ZFS and I get these messages below.Is this something that I need to be worried about ?Have I missed something when I created the resource which actuallyis configured "by the book"? Will HAStoragePlus work as expected?Can I somehow verify that the zpool is ...

hey alli installed solaris 10 on my system with configuration intel 915 GAV , 512 mb RAM, western digital 80 gb SATA, microsoft keyboard and mouse but after installation the GUI doesnt come .(while installing it also skipped some of network cofiguration steps,like it didnt ask for any ipaddress ...

hi,Sun Cluster 3.1Solaris 10 11/06I need to give rights to do scswitch -n ...scswitch -z ...scswitch -F ...to non-root users. I gonna todo it via sudo.Can someone send real examples how to do it via RBAC ?--mpech

I want to create a simple popup with a OK button when my users logon to the CDE environment informing them about some important stuff.How can I do this the easiest way?/C

can i share 3510 LUN with two server . i am not able to see LUN in second server ,cfgadm show its configured .thanks

Dear all,I got a fresh installation of SC 3.2 and I have a specific problem:The cluster is used as a webserver with many domains and many 3rd parties who need access.My idea was to mount the domains in the home-dir of the 3rd party-user so he could only see his domains.It did that ...

A lot of strange issue with dmfe Hello,This last week, we have a lot of admin messages related to dmfeinterface. I do not understand the origin of these messages. It's verystrange because my system is working just fineBelow are the messages can you help me to understand this?Mar 26 06:04:38 ...

using cd's to load solaris 10 on a dell latitude (4Gb HD and 192 Mb ram) and first disk hangs at loading install media...please wait. Is this system incompatible? Tried system checker to no avail.

I will be using solaris 10 box as a cvs server..where can i download a free cvs server for solaris 10...thank youronald manlapao, scjp

I have two questions regarding the cluster interconnect:1. Is it required to enable Jumbo Frames on the interconnect, even if you aren't using them on the public?2. If you are using the same transport junctions/switches between 4 separate clusters, should each cluster have it's own separate ...

Hi, our server Netra440 just hang at the su1 after reboot, can anyone help ?Our boot -v log:checking ufs filesystemsApr 6 16:05:12 fsck: ea-omcsvr03: /dev/rdsk/c1t12d0s0: I/O errorApr 6 16:05:19 fsck: ea-omcsvr03: /dev/rdsk/c1t12d0s0: I/O errorApr 6 16:05:27 fsck: ea-omcsvr03: ...

How do I convert SunOS 5.9 Generic_118558-14 to a version like Solaris 09/05.

Hello,I've uninstalled WBEM from my Solaris 10 and want to reinstall it.I downloaded WBEM files from www.snfreeware.org but there is no any .pkg file. There is a directory and many files. Should I compile them? If I should compile them , how can I compile? I am new at Solaris thing.Where can I ...

Upon my initial boot into Solaris 10, it asks for my login credentials before I even have a chance to create an account. I've tried logging in as root, to no avail. I know there must be a simple explanation to this, but I can't for the life of me figure it out. Is an account already assigned ...

I am a developer, looking to test Solaris 10 and write apps for it. I installed Solaris on my Averatec laptop (sempron 2600+, 256 MBs ram)I did the basic installation. During the configuration process, it asked for xorg or xsun. I chose xsun and had it run a window test. It froze up and ...

I've asked on comp.unix.solaris newsgroup about x86 max nodes, but nobody replied:Could someone clarify to me what is the maximum number of allowed x86 nodesin Sun Cluster ?The following link http://docs.sun.com/app/docs/doc/819-2969/6n57kl137?a=view states thefollowing:a) section "Cluster ...

Hello people.Me again with stupid questions. As I said, I want to use my computer as server, to serve web pages in local area network, for my family and my neighbours. What I want to do is to set up a network, and on the very first step of the installation I am in dilemma. Should my system be a ...

I need to write an X.25 application for a Sun platform to communicate withan X.29 host.I'm trying to decide what interface to use. I've found the followingcandidates: - TLI - seems like the right approach - introduced for exactly thisreason - to integrate OSI protocols into unix. ...

Hi AllI have installed Sun Cluster 3.1 U4 on Solari10 machines to run Siebel server & gateway version 8.0..unfortunately, the agents' CD does not have developed agent for Solaris 10 and specifically for Siebel 8.0 Can any body guide me from where I can get/download this agent.Thanks & ...

Hi!I had problem with do that and I finally solve. I saw that many peoples have problems with mounting FAT32 so I decided to write how I do that.1. FAT32 must be a primary partition!2. # smc3. In This Computer-> Storage-> Disks check device name. I have c1d0.4. Close smc and type # fdisk ...