I thought that /tmp was cleaned at reboot automatically and w/o any configuration changes to the system, apparently I am wrong..How can I cleanout /tmp automatically when the machine is rebooted?Thanks

i am new user how can i install the packages on the extra dvd for solaris

hi, im not a very good english writer,please understandmei磎 have a sunray 100, this show me the login screen, but when i try to login with a valid user (not root), it try to login, but comes to login screen every im try to login.thanks for your help

I've got a Sunray 100 conected to a server, it shows me the log in screen, but when i try to log in with CDE, it tries to load the graphic interfase, but it takes me back to the log in screen. (the username i'm using is a valid one, and it isn't the root)

I'm downloading 5 Solaris 10 ...iso.zip files. I want to load up Solaris 10 into a vmware virtual machine so I need a bootable CD. Anyone know how I create that after I have this download?TIA

Hi AllOs: Solaris 9SC: Cluster 3.1VXvm:Veritas 4.0EMC:Powerpath 4.2When trying to register a new disk group ,i get the following error.Please suggest a solution.#scconf -a -D type=vxvm,name=testdg,nodelist=node1:node2,preferenced=truescconf: Failed to perform an add operation on a device group ...

Two nodes HA system, use command "crs_stop ora.hostname.gsd" to stop gsd on the first node, the java program executed by script gsd coredump on the second node.This problem first found when reboot first node, or executed /etc/init.d/init.crs stop/start on the first node.

Hi to all,I'm looking information about the "+" simbol at the and of permissions of files or directory.thanks in advance ByeTug

Hello,which global filesystems are supported by SC in addition to QFS?Can I use Veritas Cluster File System? Is there anything else?Thanks,-- leon

I installed a 5-node cluster, and my DID devices aren't all matching up correctly...particularly one node on d16 and then the 4 LUNs noted in bold at the bottom...Exactly what does the cluster use to identify the same LUN across nodes? tx2spfld80:/global/.devices/node@1/devices/pseudo# ...

I'm trying to install SunScreen 3.2 on a Solaris 9 server. It "seems" to install, but I'm thinking it's not installing completely. I run the GUI install from CD 2 of the OS CD's, and everything goes along just like the instructions indicate until it comes to the "Installing SunScreen_3.2" ...

I have one workstation(hp xw4300) , with Solaris 10 (x86) and one Digi Sync570i card.The system may hangs at any time, from a few minutes to a couple of hours, when the card is receiving data frames.I doubt the system hanging is caused by the driver module for Sync570, however, the same driver ...

I've got a 2-node Cluster (SC 3.1) on Solaris 10x86 606 running. Uptime is about 171 days. noticed a java process allocating about 1.3 GB of RAM. This happens only on one node. The other one shows max. 256 MB allocated by a particular java processes.Is there a memory leak in the SC3.1 ...

We have a highly customized jumpstart framework where I work and from reviewing the documentation online for Sun Cluster 3.2 I've got a few issues:1) We cannot do the flash archive approach where we place a flar in it's own sun cluster 3.2 jumpstart tree because it would mean porting all of ...

Guys,My Sun cluster running an SAP R/3 system is giving me some trouble. Our SAP system and Oracle database running on out Sun machines went down and the cluster seems to have stopped responding. I am unable to log onto the Sun Plex manager. Although I can still telnet into both machines ...

v880 with 8 * 900 cpu 32gb internal hdds 146*10 without raid ,oracle data uploading & other i/o tasks take longer to perform then other intel server,did this server or application req. any kind of tune up or parameters changing

HiCan someone answer my query...i installed solaris 10 on my new dell laptopthe installtion was successfull but i wasnt able to connect to internetthere was no sound device detectedthe most serious problem is that it is corrupting my windows partition and im not able to dual booti had to re ...

I'm one Solaris Installer question away from completely automating my Solaris installs and I'm wondering if someone has run into this before.I'm configuring the primary interface to use dhcp. This means that I'm unable to set the netmask in the sysidcfg file. However, I keep getting ...

after installing Solaris 10 network interface is not recognized what did I miss

Clock of all players is two time faster than the real time and system clock.Such a mysterious behaviour is concerned to all players installed:Java Media PlayerRealPlayerMad playerThis corrupted clock results in double frequences etc.What is this?

Hi,I downloaded the solaris 10 express developer ed. dvd. I used Sun Download manager for the download. the file e had checksum error. Hence the DVD contains checksum error. Is there any way we could correct the download without the need re-download the entire file. Other files ending a,b,c,e ...

(I already asked this question in the Development Tools Forum http://forum.java.sun.com/thread.jspa?threadID=5149086but it was suggested that this might be a Solaris issue.)It seems that the definition of the CMSG_NXTHDR macro in <sys/socket.h> is wrong on Solaris 32-bit Sparc systems, ...

Dear allI want to know when a particular file system was mounted and i want to kow the complete history of the mounted file system.From where can i get this inoformation.Thanks.Regards

Hi All,I'm trying to put a directory into tape 12/24 GB.The directory size is more than 24 GB.I found you can do it into 2/3 stepstar cvf archive.tar archive will create archive.tarcompress archive.tarwill create another file archive.tar.zis there any command to do this in one step?On linux, ...

DearWhat does the "2(3)" mean in the show disks output under the channel ID (Ch) for Sun StorEdge[TM] 3310/3510/3511:)ThanksMohammed Tanvir

I am trying to install Solaris 10 on an Ultra 10. I have changed the original cdrom to a pioneer dvr-111d. When I run probe-ide it identifies the drive ok, but when I run the install it comes up with an error 'unable to read media'. I tried the media in another ultra 10 fitted with the ...

Hi!I have Windows Vista installed on my first hard-drive (c0d0s0) and Solaris Express, Developer Edition on my second hard-drive (c0d1s0). Both operating systems are working flawlessly but I need to manually set the hard-disk to boot in my BIOS everytime I need to use one of them.I read in some ...

I go through the installation steps for Solaris 10 and everything appears to be fine. Soon after the installation starts, it freezes at 3%. It says installing SUNWcsr. Has anyone seen this issue.

I want to know who kill -9 my process , I want to "sigaction? SIGKILL and syslog it.But SIGSTOP and SIGKILL cannot be blocked!How can I do?Please Help me!

Hi everyone, Attempting to install solaris 11/06 onto a Dell poweredge 6300. I boot the cd, choose solaris from grub it begins the boot and once it displays the SunOS copyright my monitor goes blank as if its in powersave. Any ideas? The same server currently is running Ubuntu linux with no ...

Hello. I wanted to try out Solaris. So I downloadet the files: sol-10-u3-ga-x86-dvd-iso-a.zip sol-10-u3-ga-x86-dvd-iso-b.zip sol-10-u3-ga-x86-dvd-iso-c.zip sol-10-u3-ga-x86-dvd-iso-d.zip sol-10-u3-ga-x86-dvd-iso-e.zipI've extracted it and as you can see, the sol-10-u3-ga-x86-dvd-iso-c-Iso file ...

Dear all,I have the following problem on SunCluster 3.0. The nodes are 2 x V880 running Solaris8.0 10/00.The shared array is a third part, and both the nodes are correctly seeing the shared disk by 'format' command.I'm reinstalling the cluster from scratch: I installed the packages, run the ...

It is okay to perform a Netra 440 1.28 to 1.6 CPU upgrade and a 2GB memory upgrade at the same time (i.e. rather replacing the old DIMMs on the new CPU, can we add the new 2GB DIMMs)? If so, are there any special procedures that are required?

I am new to Solaris and Unix.I have Solaris 10 running on a SunFire V240. A DHCP server was configured and used in the past on this workstation with no problems.I have recently changed the IP address of the workstation by making the appropriate changes in the following ...

HiI have a Sunfire 280R running with Solaris 8.I was installing a patch, when the system panicked.Since, it cannot access the boot area. I tried to select genunix instead of unix, but same error.I then rebooted from the OS CD using boot cdrom -s and was able to mount /dev/dsk/c1t0d0s1. the ...

Hi AllI dont have the CD for the Sun Cluster 3.1 agent . Please suggest me a link from where i can download the agent for Sun HA For Siebel Server,Thanks/Regards

Dear All1) I am getting this message in /var/adm/messages.Please suggest. scsi: [ID 107833 kern.warning] WARNING: /pci@7c,600000/SUNW,qlc@1,1/fp@0,0/ssd@w5006048c49adea53,12f (ssd125):Mar 20 03:45:37 eairy22 Corrupt label; wrong magic number2) Another error is in scstat Device Group is in Error ...

Hi, I am not able to install Bea Weblogic RFID Edge Server. I gave all permissions to that file.$ ./rfid_edge220_solaris32.bin./rfid_edge220_solaris32.bin: cannot executeCould you please tell me the solution to resolve this issue

When I try to change a property of a resource group, it says the resource group is "undergoing a reconfiguration" and try later.Can I know if a resource group is "undergoing a reconfiguration" from its status?what status is the resource group in when I can change the property of the resource ...

How do I change the Port_List value for an existing Scalable GDS using the scrgadm command?scrgadm -c .....?Thanks.

Hi all, I just installed sol10 11.06 on my nc8230.The only problem is that the CPU fan is not working at all. it can be enabled from the BIOS to run always only with external power switched on, but even then it works on slow RPMs and the laptop overheats.Does anyone have idea about ...

I am trying to install Solaris 10 x86 on a Lenovo 8212-KUA Intel Pentium D 2.8 GHz http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lnd ocid=MIGR-61032The install seems successful, but when it completes and reboots the GUI loginscreen never comes up. I first tried ...

I have just finished installing Solaris 10 on an amd64 box. The installation ended without errors.After rebooting the PC, the X output was wrong, because (I think) the video frequency is too high (my TFT screen reports "Out of frequence"). I booted into failsafe mode, and I was looking for an X ...

Hello,The developers in my department have demonstrated that Solaris 9 seems to be missing the round function. I was wondering if you were aware of this, and if anyone has a workaround.Given this sample source code (round_test.c):#include <math.h>int main() {return round(0.5);}We noticed ...

I am working in a team where sometimes the Solaris 10 OS reboots or crashes due to issues with a device driver/custom pci card the team is working on...Recently I updated dumpadm to write Operating System "core" files to a directory/partition where there is enough space for them (if there ...

I recently downloaded the VMWare image containing Solaris Express Developer Edition from http://javashoplm.sun.com/ECom/docs/Welcome.jsp?StoreId=8&PartDetailId=SES- VM-4.0-Sol-DEV-EXP-G-F&TransactionId=tryIt works great except I have one problem. The login screen resolution is set to ...

Good day Gurus.I am having errors in one node.The command scstat return this error:libsecurity: create of rpc handle to program rgmd_receptionist (100141) failed, will not retryThe cluster doesn't start all the services egg: rgmd.Also doesn't mount global devices.Please help.Best ...

We have a Sun Cluster 3.2 on Solaris 10. The Managed Resources are Solaris Zones:e.g Resgroup xx - xx-hasp (Storage for the Zone Root) - xx-lh (the Service Address for the zone) - xx-sczbt (the Zone boot Resource) - xx-sczsmf (a managed SMF Service in the Zone)How do i allow an arbitrary non ...

I have problems attaching USB2.0-Drives to my Ultra25/Blade1500 workstations. what i did:#rmformat -l..2. Volmgt Node: /vol/dev/aliases/rmdisk0Logical Node: /dev/rdsk/c2t0d0s2Physical Node: /pci@1e,600000/pci@0/pci@1/pci@0/usb@1c,3/storage@4/disk@0,0Connected Device: HTS54806 0M9AT00 0811Device ...

HiI try to mount my usb flash drive, which has FAT32 File System under solaris environment but unfortunately could not succeed. Any Help in this regard awaited .. Below is the abstarct of log==============Mar 21 11:00:52 bgl-nib.a usba: [ID 855233 kern.info] USB-device: storage@3, scsa2usb0 at ...