Hi,I齧 having question about Oracle installation using Sun cluster 3.0My I install Oracle in the array? What is the better solution: Install oracle in the array or install in the nodes?ThanksFran

Hi,I齧 a having a question about the the step to install sun cluster 3.0 in the servers.May I install Oracle in the array after or before start the cluster installation?ThanksFrancine

Hi. I want to be able to start up Oracle in an OPS environment when there is a cluster transition on a node (i.e., a node joins the cluster). In Suncluster 2.1, Sun gave you the script: /var/opt/SUNWcluster/user.scripts/<clustername>.reconfig.user_script. In Suncluster 2.2, they took this ...

Hi everybody.I would like to have one server active and a passivebackup server, which is ready to take over in case theactive one crashes. It is important that the failover timesare around 1 second. The active server is handling allthe requests, the backup server is just standing by. It isOK ...

We have a (non-cluster-aware) client-server application that has several background client programs that do asynchronous processing. In principle, these can be distributed among an arbitrary number of hosts, although in practice usually all reside on a single host.These clients are administered ...

I m currently hving a pair of E450s with external storage A1000 running sun cluster 2.2 with OPS. There are some messages that are generated when i stop/start the cluster.The followings are some messages extracted from the message log. Can someone pls advise on what does these means. Thank ...

HelloI am trying to use SunCluster 3.0's High Availability functionality. I want to build in failover support for 3 of my network dependent application services which run as daemons. Using the Agent Builder Wizard I was able to create a package which I added to both the nodes of my 2-node ...

Is there a monitoring tool for multiprocessor machine running Solaris 2.7?

HiWhat is logical host?Samebody has one example for the lines that i must include in /etc/host?I don齮 have TC.Thanksfsant

Hi,I am trying to create a sun cluster application using the GUI version of the Agentbuilder, "rtwiz".I successfully execute the create and configuration steps. I install the package.When I start the cluster application from the /opt/SUNWsample/util directory,it fails in the step when it is ...

Hi,Can somebody tell me what the "Confdir_list" extensionproperty is used for in a scalable service.When I am trying to create a resource of a particulartype, then the VALIDATE method fails because it cannot determine the value for Confdir_list.What should this property be set to if I havea ...

Hi,When I run the scswitch command on the resource groups I have createdfor getting them online, I get the message that the resource group failedto start on chosen node. Does anybody know the reason why a resource group cannot be broughtonline. What are the typical reasons why this ...

I have a cluster with two nodes both of which are addressed by ashared address.When I start my application on 1st cluster node, then the secondcluster node has the following prints in /var/adm/messages file WARNING: IP: Hardware address "Ethernet address" trying to beout address "shared IP ...

I've used the Agent Builder to create an agent for the Sun-supplied "echo_server" demo network-aware service but when I run the generated "startecho" script it reports"VALIDATE method failed -- check syslog for errors"but /var/adm/messages contains"method <echo_validate.ksh> completed ...

I have a cluster on 2 nodes E450 with Oracle installed (not OPS). I recently patched the system + cluster package to get rid of the following problem: hareg -N doesn't close down Oracle completely. After patching I didn't have this error for 2 months until this saturday.Entries from ...

Pls question:at install sun cluster 3.0 completed,how to do test the cluster successfull?

We'd like to try out Oracle 9i RAC in the Sun Cluster 3.0 environment I've been able to get an eval of the Oracle 9i RAC software and we have the Sun Cluster 3.0 package from the soldc download. In order to complete our installation and eval I think we need SC3.0 agents for Oracle. Can anyone ...

I'm trying to work out (hopefully using system calls) which controller each disk is on.I can to it backwards by calling ioctl(fd,DKIOCINFO,...) on a file in /dev/rdsk, to get sdXXX in dki.dname.But this only works on disks that aren't mirrored or under a volume manager of some kind.Any ...

Hi,I notice that import a Disk Group in fail over take about60 sec. Is it logically?Is there a way to reduce this time ?

Hi. I'm a cluster beginner and using Cluster 2.2 with two nodes, I'm having problems with logical IP.Both nodes have got their physical and logical IPs configured in the same subnet (e.g., x.y.z.1, .2, and .3).Primary node is reached fine via logical IP, but when it sends frames back it uses ...

I recently upgraded a Solaris 2.6 SunCluster 2.1 setup to Solaris 8 SunCluster 3.0.After failing to configure everything manually several time I decied to use SunPlex to do it for me. Everything seems to be configured and I am able to add a disket the only problem is that I want to use the ...

Trying to take owner ship of a recently created disket with no drives added returns with no errors but I do not take ownership.# metaset -s usupport_dgSet name = usupport_dg, Set number = 1HostOwner opcbsol1 opcbsol2# metaset -s usupport_dg -ft# metaset -s usupport_dgSet name = usupport_dg, Set ...

We are in the process of implementing T3 storedge arrays. can anyone advice how to oragainise partitions on that any document which can help? any information on building RAID on T3.thanks

I have seen downloadable SunCluster3.0 S/W at site, http://www.sun.com/software/cluster/get.html. This is developer edition.Is this the complete cluster software as trial verion? If not, is there any place where I could find the trial / demo version of SunCluster 3.0?Thanks. ...

After installing VxVM I noticed that it was only showing one scsi controller. This is a two node cluster with 3 sbus swift cards. "c0" is seen and I can view and configure the 3 disks on this controller with vxdisk, vxdiskadm and vmsa but the other two controllers are not seen by these ...

Hi,Does anybody have any info on snmp traps for sun cluster 3. The mib file is provided as part of SYMON (Sun Plex Mgr) but there are no traps. Has any integrated SC3 into HP Openview already?Rgds,Colin

Changing the root shell from ex. sh to bash has become a common thing (taking all required precautions into account,bla,bla,bla). Can this also be done on Sun Cluster, without taking additional measures than the ones required on a "simple" Sun server ? A stupid question, maybe, but then again I ...

Hi, I have installed Sun Cluster 3.0 over 2 domains in a E10K. Everything went allright up to the point where I tried to add the quorum device to the configuration. Adding the quorum was easy enough and I got no error doing it. However - resetting the cluster mode - from install to normal ...

I have a system of 2 Sun E 450's connected by SCSI to two D1000 disk arrays. I applied PROM patch, and now whichever node is booted last, won't boot properly because of this error. So far all I've installed is Solaris 8 MU6 and patches.I assume SCSI ID's are somehow reset to be the same on ...

Hi:I am using sun cluster 3.0 and configured 1 data service with failover feature. I found that the first failover can succeed from Node 1 to Node2. However, if Node 2 goes down, it failed to faile back to Node 1. The log message is [ID 649860 ...] RGM isn't failing resource group off node 2 ...

Hi,We have implemented server and network clustering, and SAP R/3 was working at there.At that time, we could not login R/3 with virtual ip but real ip always worked well.So we have removed the virtual ip and no problems are occured now.Do you think what is the problems ?And i want to know the ...

Any one did an upgrade from Sun cluster 3.0 07/01 release to 12/01 release was there any problem in the upgrade and what was the approach any suggestion

I've installed SunCluster 3.0 on (2) E220R servers with dual attached T3 arrays.Everything starts up fine, and all devices are seen. However, when I go into scsetup to establish the quorum device and clear the installmode attribute, no global devices are found, and I am unable to continue.What ...

We are planning a SC 3.0 implementation for web services (Stronghold-Apache), and are having thoughts of utilizing hardware load balancing rather than SC 3.0 built-in service scalability mechanism. Our thoughts are to utilize the SC for highly available disk resources in a SAN/NAS type ...

Hi, In sun cluster 2.2, i saw the concept of logical hosts being configured with the disksets. And we can change the mastery of the disk groups among the nodes using the haswitch command. How this concept works in Sun cluster 3.0. I didn't get clear idea by reading the document on Global name ...

I'm building a evaluation system consisting of Sun Cluster 3.0 and Oracle Parallel Server. I've installed the cluster software and pre/post patches as recommened on PatchPro and I'm just about ready to install OPS. However, when I attempt to apply the lastest OPS patch recommended ...

In cluster environment, is there a way (ioctl()?) to determine whether given SCSI disk is in reserved state?Thanks,Ilya.

Hi. I'm trying to add a logical host to a Sun Cluster 3.0 cluster, and it keeps giving the error:not all hostnames are on the same subnetNow, despite the obvious nature of this error, it doesn't make sense since a) all cluster nodes are on the same subnet (xxx.xxx.214.xxx), they are listed in ...

Any questions about Sun Cluster 3.0 solution:Storage:--Q1: D1000 array has 2 independent differential UltraSCSI channels, but howmany interface boards ? (if the 2 channels are handled by a single adapter,the D1000 is not a real HA architecture)Q2: Is the new D2 array supported in a Sun Cluster ...

Hi,I am trying to install Sun cluster 3.0 with Clariion.I can see the same disk in both nodes of the cluster. Even with scdidadm -L, everything looks fine.But when I try to install the quorum device, I get a panic in one or both servers.I have check the major and minor number of the devices, ...

When setting up a SC3.0 environment (two nodes/hosts, each of which with 1 and only 1 path to a disk subsystem, 2 heartbeat cables, 1 quorum disk) I experienced an astonishing phenomenon:Once an NFS service is defined (HA-protected), it comes to a host failover, i.e. when the heartbeat cables ...

I am installing sun cluster 3.0 and it gives me an error saying:failed to add cluster transport adapter - unknown adapter of transport type, trtype=dlpi...My network card is syskonnect - interface is skge0.....What is wrong....Thanks

Hi,we have a SF 3800 and want to build an ORACLE cluster.Can we cluster the SF3800 only with another 3800? Or can we mix HW, like 3800 with V880?Other SUN servers do support mixing of HW, but for the 3800 this is not (yet?) available?TIA,Ad Dijkhoff

Dear All Greeting !I have a iPlanet Messaging Server 5.0 SP2 clustered on SUN A1000 SCSI RAID with 2 nodes. cluster1 is my mail and cluster2 is my ldapsrv. The following is the commandline log generated by scadmin startnode command.My ldapsrv i.e. cluster2 is working fine, but my messaging ...

Hi,I am looking into porting my application to a Sun Cluster. it is an application which depends on the physical host name of the node on which it is installed. Is it impossible for my application to be ported to the cluster? (because this is one of the pre requisites in the white paper.any ...

I already have a quorum disk configured on my 2-host cluster attached to a fibre-channel RAID array, however I need to replace the quorum disk. So I added the disk, reconfigured scdidadm, and it shows up as d77. I go into scsetup and it runs the following:scconf -a -q globaldev=d77then gives me ...

The objective is to migrate existing Sun Cluster to new storage. Is there any written procedure for such storage migration? Environment is a combination of SC2.2, SC3.0, DiskSuite and VxVM.

Sorry for this; I'm sure this has been answered before, but please could anyone tell me if vxDMP is supported under Suncluster 3.0 or not. If there's supporting documentation, so much the better.Many thanks,Simes.

Hi all,I am trying to install Sun Cluster 3.0 on 2 Netra 1 machines. I'm having problem setting up the private network interconnect. I'm just using a simple cross over cable, and the operational lights are on for the 2 ports. However, when I install, I get the following error:scrconf: Failed ...

HiI have installed Sun Cluster 3.0. The installation was successfull. I am configuring two test machines (Netra T1 and V100, running Solaris 8). After reboot, I am getting this message on the screenExecuting last command: bootBoot device: disk File and args:SunOS Release 5.8 Version ...