I am evaluating several platforms for clustering and am interested inSun Cluster 2.2. Can someone help me fill in the answers to thefollowing feature list? (some are yes/no, others may require longer answers). Some of the answers I can glean from the documentation, others I haven't been able ...

I am evaluating Sun Cluster 2.2 for the usage as clustering software within our project.Can anybody say me, if there is a dependency between Sun Cluster 2.2 and Sun hardware ?Can I use Sun Cluster 2.2 with other hardware platforms running Sun Solaris 7 and Veritas Volume Manager ? ...

We are looking at clustering two E6500 servers. However, we will not have the clustering software available to us for another month. Currently, we have one of the two servers built, and I would like to migrate some scripts to this box for testing. If I migrate our scripts from our current ...

We are looking at clustering two E6500 servers. However, we will not have the clustering software available to us for another month. Currently, we have one of the two servers built, and I would like to migrate some scripts to this box for testing. If I migrate our scripts from our current ...

I am trying to learn more information about clustering & provide some documentation for Junior admins to learn. I can't seem to find any website with good current information about clustering with solaris other than the Sun White Pages. any suggestions or locations would be greatly ...

Hello,We are planning to implement Sun Clustering. We also use Netscape Enterprise Server 3.6. I need more information regarding set up / Software available for Netscape. ThanksJignesh

All the configuration settings for clustering are done through kregedit - which seems to be a GUI based registry editing tool. Can we access regedit without X? Does it exist in config files that can be edited from a command line?

Can we run the Oracle Parallel Server together with other HA-Service like Blaxxun Community-Server on one Sun Cluster 2.2 ? Have everyone experience with this configuration ?

We have a 2 node cluster and want to nfs mount filesystems between the nodes. I can see why this is not supported, but are there any work arounds to this?Duncan

Hello,Now we have a problem about Sun Cluster.But we cannot isolate the cause.So we'd like to raise the log level of the cluster software.I think we can do it.I'm soory that we don't have any manuals about SUN hereAnd this is an aregent issuePlease let me know how to change the log ...

Does anybody have any experience running third-party disk storage devices (RAID, solid state disk, etc.) in either a 2.2 or 3.0 production environment?Robert Davidrdavid@imperialtech.com

The main question is, in order to have an Oracle standby server, can I use Sun clustering, or is there a failover solution outside of clustering, but not third party. We basically want to just have a standby databse that can take over if one fails, but we're unclear on the time frame that the ...

Hi All, Can somebody provide help/pointers on how to make (java or c++) application cluster aware ? In our application We are making cluster of two solaris m/cs for higher availability.The application which are running on the m/c are written in java and c++. TIA Regards Praveen ...

We are clustering the Orbix 2.3 in Sun Cluster enviornment. Did anybody face any problem in making Orbix cluster aware. If so all the pointers and suggestons will be helpful

As described on SunCluster documentation, the minimal supportedserver platform are Sun Enterprise 2 for Cluster 2.2 and Sun Enterprise 220for cluster 3.0.Does anyone know if it's possible to have a simple 2-node cluster (2.2 or 3.0) environment composed by :-2 Ultra10 servers (1 internal IDE ...

I have SUN 5 (256M RAM, 9GB int IDE HDD + 2 SCS Unipack HDD)(soft OS Sol 7, Oracle 8.1.4, OAS 4.0) Sun is doing NFS file service what is used by IBM servers(connected in cluster) for to copy to the SUN external disks db exports and back-ups (shares are "mount hard"). From one node to Sun's ...

hi i am going to upgrade all the cluster system in my project for solaris 2.6 to 7 and i want to know if there is going to be any affct on the clusters (sun cluter 2.2).

Hi!Has the Cluster 3.0 package an SNMPv2 Agent includet?Where can I find general information on it and how to handle it?Thanks,cAner

When Sun Cluster found a fault(may cause failover or not) and repair it, how to inform the administrator or administrative software? Here is a example. The NAFO backup group has two adapter. Sometime the active adapter doesn't work and automatically failover to the inactive adapter. We should ...

Hi,Is it possible to configure three Sun E10000 nodes in a cluster so that the first 2 nodes will be in scalable mode with dynamic load balancing and and the third in failover mode?. The application running is a web server with Oracle databse at the back end. The node in failover mode is meant ...

Is it possible to get the SUN CLuster Software for freee in any SDC solution?

I need to trap this event, and make some software handle the situation. Is there any event or message or interrupt generated when some one pulls out the LAN cable or the interface card is down ? If yes where n how can I trap one?Ciao...

Any idea the possible of the cluster startup fail ?Error meesage attached Recent Error Messages on sunpax2May 31 23:20:49 sunpax2 ID[SUNWcluster.pnm.pnmd.2002]: initial: Bk_gp (nafo0) Status (OK); Adp (hme0) Status (OK)May 31 23:20:49 sunpax2 ID[SUNWcluster.reconf.ccd.1701]: sunpax aborting ...

Hi,I'm new to SUN and looking for advise on the components required to run a SUN clustering.Thanks in advance,YC

How to define a failover service?

I've registered a service in cluster using following command:hareg -r sigService -m START_NET="/export/home/pdx/sig/bin/startc" -m STOP_NET="/export/home/pdx/sig/bin/stopc" -d "oracle" -h "pdxsig" -a 1But during cluster startup service startsup on both servers active and standby .How can i ...

Is it necessary for a dataservice to associate a dataservice using scconf after hareg is done?I've a dataservice registered through hareg :hareg -r sigService -m START_NET="/export/home/pdx/sig/bin/startc" -m STOP_NET="/export/home/pdx/sig/bin/stopc" -d "oracle" -h "pdxsig" -a 1This service ...

This message related to previous rpc.pmfd query .What if java process shows resident memory around 500M ?I've two clusters , on one it shows resident memory size 22M and on other it's 565M in top output.Ofcourse it varies few megs.

I need to know whelther Sun Cluster can work with Network Appliance Storage.I need to choose Sun Cluster or other cluster which can support Network Appliance.

I would like to know how that Multiple IPv6 Address setting on Solaris 8.I could create virtual IP address to NIC by ifconfig command one by one. ex) >ifconfig hme0 inet6 addif 3ffe:0:0:1::2/64 upIn this method, the number of virtual IP address is maximum 255 only. I need to create over 255 ...

I've following service registered in cluster.hareg -r egwService -m START_NET="/export/home/pdx/egw/bin/startc" -m STOP_NET="/export/home/pdx/egw/bin/stopc" -d "oracle" -"pdxemg" -a 1The start net method works fine during cluster startup.But when i try to stop the cluster on one of the node, ...

Somebody is working with this configuration ? All the time the fault monitor is trying to connect to sysmaster, and said "DBMS Error: connecting to database: -25572 Network driver cannot bind a name to the port."Dbaccess work's rigth !!!Whta's happens ?Thank's in advance !!!! ...

This is reference to topic dated Jul 5, 2001 12:41 PM I tried manually stop the data service and check the return code using "echo $?"hareg -n dataserviceIt is showing "0".

What does the following error message mean? It is not documented in the manual. Maybe generated by a patch?ID[SUNWcluster.ha.hactl.5016]: Can't add to ccd. Return code = 68 value = <hostname>:haregserv format = hname:ds_name

Hi,Is it possible to reconfigure the Ethernet Cluster Interconnect IP address for a Sun Cluster?Where can I find the informationof the Cluster Interconnect.The default is set at 204.152.65.1 and 204.152.65.17Can we change the IP address?Thanks!Yew Meng ...

Hi,We are trying to compile a certification matrix for our Oracle Applications System.Is Oracle 8.1.7 (OPS) and Sun Cluster 2.1 supported/certified on Solaris 2.6 ?Also, we want to use Oracle Applications 11.5.1. Would all these products work without a hitch or do we have to upgrade the ...

Hello,I have a question about the proper position for the server key in a cluster. You know, the little key on the front of the machines with on, off, secure, diag settings? Right... :) Anyway, my understanding (which could definitely be wrong :) is that the secure position on the server key ...

Q: I need to run 2 "crontabs" for certain users on a 2 box cluster [Sun Cluster2.1]. One crontab for user X if node is primary [has services] and one if node is secondary. There are a multitude of ways to accomplish this [script re-write, using User-Defined Scripts, etc.]Has anyone done this ...

I have a simple C++ application using fork to utilize multiple CPUs on one machine. I have been asked whether this design will be able to make use of other machines in a cluster, should the machine it's running on become too busy. My assumption is that the answer is "No." My question is, in ...

i have two servers with an external hdisk each, one running oracle 8i and the other running iplanet java server.i want to configure these two nodes in a cluster.how do i do it?.can i have both iplanet java server and oracle 8i running on the same server in a cluster.please give me suggestions ...

Hi, Anybody can tell where to find the STREAMS DLPI Specification, 800-6915-01?

I am looking for possibilities to get an email sent (through a shell script) whenever a failover/swithover occurs, so that i can alert a bunch of peoples at the samt time.Is it just to place a script in the catalouge /rcP.d/ directory, which seems to be used last in the "reconf_ener" script.Any ...

Hi everyone,For some odd reason, we configured our 2-node cluster (V2.2) using DiskSuite. We are in the process of adding another node to this cluster. I have heard that DiskSuite cannot be used for a cluster with more than 2 nodes. I called Sun tech support and was told not true. Anyone out ...

How easy to set up a cluster configuration using unix 2.6

Hi, I am Girish working as System Administrator at a Private Company who is into ISP Services in India. I am trying to Install and Configure the Clustering technology on Intel based SunOS. Please let me know how to do that as early as possible ?Regards.

hi, I wan to read the system informations like free swap space, free memory available etc on my solaris machine. I could directly read them from /proc directory on linux machines but i dont know how to read them on solaris machines. Can somebody help me out ?Thanks in advancePirabhu Raman ...

I am building a test system in our lab on admittedly unsupported hardware configurations but the failure wasn't expected to be so dramatic. Setup as follows:2x E250 (single processor, 512 MB RAM)dual connected to D1000 fully populated 18 Gb HDDSolaris 8 6/00 with all latest recommended ...

This is a two node cluster consisting of:2x E250 w 512 Mb RAMboth connected toD1000 with 12x 18 Gb IBM HDDsAfter I got over the initial configuration problem (see "Sun Cluster 3.0 update 1 on Solaris 8 - panics!" in a previous topic), I've run into another (why me?).Post configuration of ...

Hi, I am setting up a cluster evalutation environment by using 2 sparc 5 stations. Can I use the built-in SCSI connector to connect a share SCSI storage?

We are connecting a Sun 3500 to an HP VA7400 storage device, we require redundant paths to our volumes and it has been suggested that we need to purchase Veritas Logical Volume Manager, can we accomplish the above using Solstice Disk Manager? Any advice would be greatly appreciated as we are ...