HttpServlet class is an abstract class. but we dont override all the methods why?

Hi,Can the manifest file generated using inetconv on Solaris 10 manually removed or some command needs to be executed. ?Soes any special care needs to be taken in order to delete the service manifest file.Thanks.Regards,Hemil

Hi, I'm trying to switch my Solaris 10 box from DHCP to static IP. It worked out of the box with DHCP. I've read through the forums and googled, and I think I'm almost there, but not quite. My network interface is bge0; the desired IP is 192.168.2.5 with hostname server2; and the router is ...

folks,I'm trying to setup a SVN server on Solaris 10 Sparc. I got everything installed and the SVN server up.Code:# svcs -a | grep subversiononline 18:31:25 svc:/network/subversion:defaultPort was set to 3691 using: svnserve --daemon --listen-port 3691 --root /export/home0/subversion and it ...

Hey everyone, I recently was trying to configure ldap on SunOS 5.10 and accidentally edited the pam.conf file to use ldap verification for the login and remote login. After I rebooted I realized that I hadn't worked out all the ldap configuration kinks and when I got to the login screen, the ...

Hi,We have a 2 node T2000 cluster,The first one configures external EMC storage and VERITAS VxVM stuff.The second one, when installs VERITAS must see the external storage and the already configured VxVM items.after it is registered to the EMC we issue a devfsadm command but it doesn't see the ...

Hi,I have downloaded solaris 10 installation CDs from site, verified them with checksums and burnt then into 700MB CDs. When I put the first one into CD-Rom and issue "boot cdrom" it prompt smthing like:there is no executable file ...What is the problem?

On solaris 10 I have configured the snmpd.conf file and then I run /usr/sfw/sbin/snmpd to start the daemon. How ecaxtly should I configure it in the rc directories to come up at boot time. I am confused about /etc/init.d/init.snmpdx. I'm not that experienced with /etc/rcX.d/SXX scripts and how ...

How to enable/disable services while doing a jumpstart based installation.thanks & regards,rathi

We modified the normal files to do this and yet we still don't see the change at logon. Anyone know if this changed in release 10 or if running on an X86 has an influence.

I managed to get 10 installed and running. Have root and one user setup and got a number of updates except several require manual installation. Haven't been able to find out the instructions to do that.I have a good bit of years with Linux and WIndows but new to Solaris so I need a bit of ...

I downloaded and install solaris 10, relise 6/06, sparc.uname show me "SunOS 5.11".I tryed install 10_Recommended, but system says that incompatible release.There are where Recommended patches for this kernel?

hi guys i can ask you some clues on can disable (wheel button) on solaris 10 (sparc) i have some application problems using a scrolling mouse. somebody of you know how disable wheel scrolling function?Thank you.

Hello,I am running Sol 10 11/06 on a Sun Blade (64-bit). After installing patch 119059-27, an imaging application that is vital to my workflow will no longer run. I get a Segmentation Fault.The application is ENVI Freelook, and is available for free ...

I am trying to add a new user so I can do some software testing.I am usinguseradd -d /home/test -s /bin/bash test I can log in using ssh however I can not login using the X GUI. I see the problem seems to be that there is no home directory and I can not make one. I am doing all this as root. ...

Greetings,I'm not having much luck with the forum and I was thinking it may be my selection of forum area to post in. I'm currently developing in C on an E25K running Solaris 10. I'm trying to write high-performance code to take advantage of my environment and I need to know where I can post ...

I've got about 20 T2000 systems all running either the 6/06 or 11/06 release of Solaris 10. They're all using the e1000g driver for the on board NICs. They're all connected to various gigabit switches in our environment. My problem is that I'm getting nowhere near gigabit speeds out of any ...

Hi,How do I increase number of ptys in Solaris 10, also what command to view how many total currently set?I try to put set pt_cnt = X and rebooted, seems to be not working.Thanks!

I installed a new full load of Solaris 10 U3 (ie 11/06) on a sparc box (V210).Ran install_cluster in the latest recommended patch set and it installed abouta half dozen patches.That seemed low so I rebooted and ran install_cluster AGAIN and it succeededon thirty four (34) patches!Whats with ...

HiI wonder is anyone here can help me see the light....V245S10VxVm 4.1Encapsulated the root disk, updated /etc/system. Rebooted the server but it is hanging...............Hardware watchdog enabledip_arp_done: init failedFailed to configure IPv4 interface(s): ce0Hostname: s2NOTICE: VxVM vxdmp ...

I have 4 cd set of solaris 10. I have an 80 GB hard disk with four partitions(NTFS). My current o/s is xp. Do i need to do any partitions in my hard disk before starting the installation? (I mean deleting any logical drive).Previously i tried installing by removing the logical drive for a ...

I have a HP DL385 with 4 SATA drives, the machine crashed today for unknown reason and rebooting was not possible since the boot-archive got corrupted.I booted into failsafe, I get a prompt but I also get"No installed OS instances found".Apparently the SATA driver I loaded from a separate disk ...

Hello,The proc files are causing problems for Disk Analyzer and File Manager on Solaris 10.It seems they are being read in a continuous loop. For example: in file manager, I click /proc folder then I can click /0, then /cwd, then /proc, then /0, then /cwd etc....In Disk Analyer will ...

Where can I find help on the info in the /etc/release. Here is what I have for my server now.Solaris 10 11/06 s10s_u3wos_10 SPARCCopyright 2006 Sun Microsystems, Inc. All Rights Reserved.Use is subject to license terms.Assembled 14 November 2006.Is s10s_u3wos_10 a build number just like Nevada ...

Hi,Have a v440 which passes full diag routine. with brand new solaris 10 dvd received from sun, with a freshly formatted 9gb hdd. When trying to bbot from the dvd, "boot cdrom", i get the following cycling through.Hardware watchdog enabledsvc.configd: smf(5) database integrity check ...

Hi all!I know this subject having been handled on many forums, but I'd still need some help in configuring Solaris 10 11/06.I just got a laptop based on Uniwill M30EI0 -platform with which I can't get full widescreen resolution 1280x768 working. I'm using Xorg server and have downloaded the ...

Hi All -When Locale is set to en_GB.ISO8859-1 and sort done, the output does not match the sort done on the same file with Locale set to en_US.ISO8859-1. Please note that both are using the ISO8859-1 char set. Why is the difference?Your input will greatly help.Thanks in ...

Hello,I'm following the same aim, i used /usr/sfw/bin/pdf2ps but i received the following error: gs: not found. So i tried /usr/sfw/esp/bin/pdf2ps i then i obtain a ps file.But my pdf was with arial and Century Gothic font and when the ps file has generated i obtain an other font. It seems ...

Hi,Recently, we started getting WARNING messages from our ISP that one of our box IP generating malicious traffic.We have a Solaris 10 Box (OS patched upto date - services like telnet, snmp are disabled already) with that IP (ISP mentioned), is generating malicious traffic. I confirm it doing ...

Hi there,Is there a Solaris command to show all the network interfaces in a server(plumb/unplumb etc...).I have a V880 that has an eri0 on board, plumbed up. It also has a coupleof ge0, ge1, and ce0, and a qfe card.ifconfig -a only shows eri0.(I am using something like "dladm show-link", but ...

I am running Solaris 10 on an X2200 M2 machine, fully patched with all the latest patches.I am trying to run an application, which I have configured and tested to run in the global zone, ie locating the startup script in rc3.d works. However, when I created a non-global zone to host this ...

Hi,I'd like to migrate a couple of zones off of a very busy T2000; mostpackages on the target machine for the move are on a more recent patch-level than on the machine where the zones come from.How trivial is the move, can I patch them up from their new globalzone after a forced attach? ...

Hi,Is it allowed here to put job offer?Regards,Daniel

Hi,I have this problem trying to unzip the solaris 10 patches. The file is called 10_Recommended.zip. If I use the following command i get this:#file 10_Recommended.zip10_Recommended.zip:English textand when I unzip the file i get this error message:#unzip 10_Recommended.zipfile #2084: bad ...

I need to install Solaris 10 on an Windows XP Pro system running HPFS. I cannot find instructions (on the Sun website) about whether the Solaris 10 installer will recognize that XP is already installed, and whether it sets up dual boot automaticaly.Can anyone tell me how to approach this, and ...

Hi, I just installed Solaris Express Developer Edition 2/07 , but i can not connect to the internet. I don't know how to configure thid acces

Hi,How the enter French or German chars?I have installed French language packages. Kind regards,Daniel

Hello,How can i activate IPv6 in Solaris Express Developer Edition?

HiAs I want to know that is there any firewall available inbuilt with Solaris 10 like IPTABLES in Linux. Also as I have heared about Sun Screen Firewall was available upto Sun Solaris 8. Why it was stopped after Solaris 9 & 10.Can you give me more details on ...

I setup my mirror, sub-mirror, and meta database to enable SVM to use raid1. When I change my vfstab to the meta locations I am able to boot, but are unable to write on the disk. Does anyone know why this might be happening that may cause my root disk to act like this? Thanks in advance!

Hello there ! i am trying to jumpstart a v240 machine from a jumpstart server, which contains the media dump (of solaris 10 sparc)from a CD . But initially the jumpstart is started the pacakges are installed properly and the patches are also installed properly (10 recommended patches) . After ...

Hello. I had a Sun Technician install an XVR-100 card into each of my 4x490s. I am trying to boot my Solaris boxes to display on a KVM switch, though I get NO display? Any suggestions?To do anything, I need to at least get a promptRegardsJeff W

Hi,Do you know how to change keyboard layout to French?System configuration:Solaris 10 (SPARC) installed on SunFire v245French languages packages installedConnection to server by a Remote Desktop from WinXPThe output from the kbd command is as follow:bash-3.00# kbd -tUSB keyboardbash-3.00# kbd ...

Dear all,I am trying to install solaris 10 in sun blade 1000 and getting a problem that disk doesn't exist ......... After several tentatives, I understood that I need to format a harddrive as it is new. I formeted it with boot cdrom -s and the problem still persists.I bought a 73g HDD and the ...

Hello,I'm experiencing something really strange when editing crontab, when I type:crontab -eI get a number and everytime I hit enter a question mark ?For example:bash-3.00$ crontab -e292???The crontab file was not changed.Any ideas why is ...

Hi Everyone,I am very new to Solaris world. I have an Ultra 20M running Solaris 10 (x86), and a Linksys 350N router connected to a cable modem. But I am not able to go online. Please can you help me with the commands or steps I need to take for configuring the Solaris for accessing the Internet ...

Dear fellowsWe just migrated to Sun Solaris 10 11/06 and installed sucessfully. When we run Sun Solaris after entering login/ user name it do not accept password. While the password is correct. Please help usFarooq

Would anyone show me how to configure my cable modem connect to NIC, but it can't connect to internet. I take the cat5(connect from modem) plug back to windows xp system at NIC it's working fine.have done so far:#ifconfig -a plumb#ifconfig -a auto-dhcperror:ifconfig: lo0: interface does not ...

I installed Solaris 10 on a Dell Dimension 3000 with two hard drives. I put Solaris on HDB2 (second partition on second hard drive).The partition was previously occupied by NetBSD.The other operating systems are:Windows XP on HDA2Slackware Linux on HDB1 Debian Linux on HDB3I use Grub to boot ...

For versions previous to 10, Sun would release a collection of patches in the form of a Maintenance Update to bring the system up to the same feature point of a particular CD release.I recall reading somewhere that this isn't going to happen for Solaris 10 at all.Does anyone know what the ...