My solaris 10 sendmail 8.13.7 server won't relay mail from its windoze clients that successfully connect via pop3 (qpopper). So, only internal mail works from the clients. When you're on the sun server, inbound and outbound mail works to and from the wan via the command line or using dtmail, ...

I loaded Solaris 10 x86 on my pc and after all the loading and file copying and whatnot when it said to reboot the machine I clicked on the "Reboot Now" button, took the DVD out of the tray, and when the machine booted up all I got wasgrub>Now what?I have 1 GIG RAM. 200GIG HD, AMD Athlon ...

I have intalled solaris 10 v11/06 on a blade IBM LS21.1st i'll try with DVD and have error, I searched on the net and found a document which explain what i've to do to install.For that I had to apply 3 patch and driver package to miniroot image.Everything work properly. After installing ...

I recently upgraded my Solaris 10 Jumpstart server (JET) to ZFS filesystems for the media directories. When adding the OS images (add_install_server) from the installation disks (ISO - latest) only Solaris 10 seems to work. The Solaris 9 version fails as it doesn't recognise ZFS filesystems. ...

Hi.We are installing a new server with Solaris 10. It is going to require the use of a network driver installed during installation.Unfortunately, I was given a floppy image of the ITU disk and there are no floppy drives on the server.I have a flash drive I can use, but how do I convert the ...

Hi All,Solaris 10 (Sparc) Generic_125100_07 64 Bit Sparc Ultra 60During boot right in the beginning when it is detecting devices it will die and kick me to maintenance mode with the following error:==========================================================ld.so.1: devfsadm fatal relocation ...

HiAs I have to configure Internet in one Intel based Solaris box [Solaris 10] can you tell me the steps how to configure it as I have Brodband connection of Iqara.

I'm trying to build Apache2 on Solaris 10 using the Studio11 compiler. I have current versions of APR, APR-util, and libiconv installed.Configure runs fine, but make fails withUndefinedfirst referenced symbolin filelibiconv_close ...

A V890 machine is connected to Cisco switches then link to a Nortel firewall. After configuring IPMP. pc can telnet and ftp to the sun machine without any problem. Host is showing some errors in message files. But IPMP configuration was done similar for all the SUN machines. V890 log :May 12 ...

ive downloaded solaris10 dvd version. when i run setup it says after a while that theres a corrupted file and stops the installation. can anybody tell me what should i do.is there any tool that can find the corrupted file and repair it. ive got slow internet connection and it took me about 2 ...

I've got a couple Solaris 10u3 hosts running as NIS slave servers to a Solaris 8 master.I'd very much like to have them stop spawning rpc.nisd_resolv, so they won't try to do DNS lookups for clients.I've done the traditional two things that accomplish this: removing the -d option to ypserv, ...

Hi,I am creating solaris zone on T2000 with Solaris 10.I am able to limit the CPU's available to zones by configuring the pool and assigning it to zone while creating.But I am unable to figure out the steps to limit the physical and shared memory for the zone.Can you please help mw with ...

Hi All, We are looking to lock down some servers by using the /etc/ssh/sshd_config AllowUsers Parameter to specify users that are allowed to connect.We have setup the following..AllowUsers test@server.nameDoesn't work, and no-one can log int via SSH at all..however ...AllowUsers testallowed ...

IntroductionThis assignment requires you to build a Graphical User Interface (GUI) onto the Bank application you built for assignment 1. The main ones that you will need to be aware of are:? ?The Vector of Customer objects is now a private static variable (called customers) of the Customer ...

Hi...I'm very new to Solaris and I'm only installing on it...I had to uninstall the software I installed and reinstall it again...but it seems there are some JDBC or data sources names still on the system and were not removed during the uninstall...it's a sub zone and there is nothing else ...

Hi,I was wondering if it is worth spending $240 to get a one year of Solaris support. I am an independant developer using Java on Solaris 10.Anyone have any thoughts on this?Thanks

For the past several hours, I have scoured the internet searching for an answer to what I thought would be a very simple question. Perhaps it is still a very simple procedure ... I am just at my wits end, though, as to how to do this.What I want is for a "normal" user to be able to shutdown the ...

Hello Solaris gurus,I am trying to install Solaris 10 11/06 x86 on my SONY Vaio laptop. I already have Windows XP installed and I have reserved about 9 GB for Solaris (same hard drive). I have been reading threads on a bunch of different forums about dual-booting XP and Solaris. I had done it ...

I want to add an additional disk to a Solaris 10 server.In the past, I used Disksuite on Solaris 8 server.I do not see Disksuite on Solaris 10.Is Disksutie part of Solaris 10or Should I used Format uitility to add the hard drive and then volumne manager to extend the new hard ...

I installed Solaris 10 in my machin ,but i choos default language .how can i change it to Frensh.

how to find last modification time of a file in solaris in timestamp format and not as human readable date?in unix i could do it by stat command but stat is not available in solaris.

Hi,I am new to Solaris. I have done a new installation of the 10 on a sparc and it went well. I need to block all the unwanted ports, for this i have edited the /etc/services. After a rebooted, i don't see any effect, i can see the ports are still listening.Any help is ...

On my desktop machine, a SPARC Sunblade 1500 I use the Java Desktop and successfully run such things as gedit, gnome_terminal, Eclipse, and Oracle's SQL Developer.I'm trying to determine what packages I need to have installed on my development server box so that I can run those applications ...

Hello,I have a problem that I have not been able to fix. I am using gdm to login to my Solaris 10 x86 server, but I am initally only able to log into the Failsafe Terminal. Once I log into the Failsafe Terminal, I can exit and log into any other mode (JDS, CDE, and Failsafe JDS). This is the ...

there is a bug:4852269 which sums up my problem well.I have a solaris 10 sparc with a big nfs shared raid5, and most of the other suns I have run solaris 8. the access time from sol8 to sol10 is awfull.Is there some config/patch I can apply to the solaris 10 box?I have put on the latest ...

Hi,My system go panic when I rebooted my V100 after patch it with EIS Jan 2007 version. The error show below :panic[cpu0]/thread=30000f4dca0: BAD TRAP: type=31 rp=2a1002ff340 addr=38 mmu_fsr=0 occurred in module "genunix" due to a NULL pointer deferenceied to the systemI had search through many ...

Hi guys,i have two sunfire v440 servers which i have loaded Solaris 10 OS on them and i have installed a Web and DNS server on them..However i would like to synchronize both the servers for FAILOVER,so that incase one is down (crashes),the second can take over.I believe their is a daemon which ...

Hi,Can you please let me know the diffrence in "pam_dial_auth.so.1" from solaris 9 to solaris 10.we are using the pam model for authentication purpose in our software.It was working fine for solaris 9 but while implementing our software in solaris 10 it is not authenticating. pam_authenticate ...

is it possible to use Solaris as terminal server (like win2000 server or win2003 server)

Hello,I have some zones set up in solaris 10. When i try to scp a file to any of the zones, i get the following error:"shell-init: error retrieving current directory: getcwd: cannot access parent directories: Inappropriate ioctl for device"1. /export/home is mounted using lofs in to the zone ...

Hi,Is there a tunable time out parameter for the ssd driver?In my case the I/O freezes forever. I would expect that the other half of themirror would be accessible, but its not.Any ideas, comment much appreciated.RegardsUlfMay 23 10:31:59 dceuxa2 scsi: [ID 107833 kern.warning] WARNING: ...

Can someone plz explain to me how to write a shell script to check date?

Hi,I am getting the following error message while trying to execute a program through dbx.(dbx) runRunning: dev_server(process id 16372)t@1 (l@1) signal SEGV (no mapping at the fault address) in mutex_lock_impl at 0xfd2b8dcc0xfd2b8dcc: mutex_lock_impl+0x0010:ldub[%i0 + 5], %i4(dbx) wherecurrent ...

hello!I just installed Solaris 10 and I'm trying to setup an ftp server (with ftpd) but I don't know how to do thatmy server doesn't need any security or authenticationI'm looking for the default shared files directoryAlso wondering what to change in what configuration file...This OS looks ...

Hello,I am running Sol 10 11/06 for sparc, fully patched. A few weeks ago, smpatch and Sun Update Manager (SUM) started behaving very badly. smpatch analyze works OK, but smpatch and SUM now hang apparently forever when updates are being installed. smpatch will download selected patches to the ...

HiKindly note that as I have solaris 9/10 installed with no. of softwares like1. SUN ONE APP SERVER2. ORACLE3. MYSQL4. APACHE WEB SERVER5. IPLANET WEB SERVER6. IPLANET PROXY SERVER.7. NETSCAPE WEB SERVER ........As in case after long time I want to check which softwares has been installed with ...

Hello all, i just installed solaris, its the first time im using it and i m having trouble setting up the network.I did modify /etc/nsswitch.conf to use dns. I edited /etc/resolv.conf to add the dns server ip.Now i m stuck and dont know what to do. I m using a switch and a router, and solaris ...

Hello everyone,I just installed Solaris 10 on a Sun Enterprise 220R and I would like to have access to xdmcp from within my network (port 177 is closed on my external routers) I have checked the gdm config file and its all set.I am trying to connect using reflectionx or xming.I heard I might ...

Hi -I just installed Solaris 10 from cd. Logged in as root. Created a user account and setup the password with "passwd". I then logged out and tried to login with the new user account but no luck. It acts like its going to log me in then takes me to the text screen and then back to the login ...

Hi allI am having trouble in running my code on 64 bit compilation bu sun studio 11.The same code is working fine on 32 bit compilation.I am using the following compile time flagsCC -g -xs -xarch=v9 -xO0 -D_XPG4_2 -D__EXTENSIONS__tried to debug the code using dbx and it is showing address ...

I had a setup in which network based installation was working. Now I am trying to install Solaris 10 in a machine in which Solaris 10 was already install as I want to do some enhancements to the installation process. But now the setup it self is not working. It invokes the begin script of the ...

Hi,i would like to configure mpxio for Netapp SAN Storage on a Solaris 10 6/06 machine. Format -> inquiry gives me Vendor:NETAPPProduct: LUNRevision: 0.2so i changed the /kernel/drv/scsi_vhci.conf to:device-type-scsi-options-list ="NETAPP LUN", "symmetric-option";symmetric-option = ...

whats the proper way of creating new accounts from the command line?

Hello i m installing Solaris 10 on for x86. I m following the tutorial for installing solaris 10.After the welcome screen appears i dont have the network connectivity screen. I go straight to set date and time.What could be the problem ?

Hi,I have installed Solaris 10 on a V240.I have installed Storage foundation Veritas VXVM VXFSI have don't encapsulated disks.I have installed patches 123003-02 123630-01 and 123005-05At boot svc:/system/basicreg:default not start.If i look with svcs -a i see maintenance for this service and i ...

Our var partition filled last night and crashed the machine with various errors writing to the mirrored Disk. I was able to bring it up and clear some space on var, but now a metastat is reporting Needs Maintenance on both submirrors as below. This is present for all the mirrors. Also on boot ...

I would like to know the proper way to convert a disk labeled EFI to SMI. I have looked at some documentation and they state not to use format -e to convert the label, but to use fdisk.>> However fdsik seems to only work on Solaris for intel x86 and not SPARC. due to the lack of any ...

Hi All,How I change Screen Resolution to 1024x768 in CDE?Thannks

I have a Belkin F5D7010 wireless card with RT2500 chipset .I have been trying to set up this wireless card on Solaris10 (IBM thinkpad R40 box) for the past week, without success. If i use ndis wrapper I am getting $chicago$ Segementation Fault core dumped error while running ./ndiscvt -i ...

I need to install a driver for my RT2500 PCI wireless network card on my Solaris 10.So I went to the ralink website (the manufacturer of the network card), and downloaded the linux (well supposedly the unix driver) binary file. Burned it to dvd, and copied from the dvd to my solaris computer.So ...