I just installed the four Apache2 packages onto my system, but SMF isn't working right. The service didn't appear in svcs -l after they were installed, so I tried importing the manifest manually, and am getting the following error. Any ideas?# svccfg -v import ...

Hi How do I grant access to other member in my unix box.thankssiva

Hi All ,After restarting the sun box, the route entry was gone. How can i put route entry permanent.Regards,R. Rajesh Kannan

Hi All ,I need to add a static route to our SunOS 10 box. I know I can do this using the route command but, how do I make this change permanent?Regards,R. Rajesh Kannan.

Hi all, my first time here.I need to get hold of a reference detailing the directories, files and commands for Solaris 10. I did search the Sun site's documentation but can't find it.I'd like to modify an existing QNX script to run on S10 (eg command paths, command parameters etc.). I've ...

Dear forum,I'm getting the a.m. message whe SOL10 6/06 restarts on a x2100 X86 server.I've come across the following doc regarding the release notes of SOL10 6/06: http://docs.sun.com/app/docs/doc/819-5947/6n80cmc6f?a=viewI'd have to "2 - List the SUNWbreg and SUNWbrg localization packages ...

Hi.I'm trying to install the 06/06 release of Solaris 10 on one of our Sunfire X4100 machines. Everything was going fine until it came time to register and update the patches.At first, sconadm just hung up and did nothing. I found a thread about installing SUNWjdmk-base and stopping and ...

I have a TLI based network app that has worked fine on lots of Solaris OS versions, including the previous generation Solaris 10 on Intel hardware. The app fails on 6/06 version of Solaris 10 on x64 Intel (happens to be Dell hardware) under light loads.t_listen is returning TLOOK. t_look ...

Dear support,i have tried to install xsun or xorg. but all the time i have following./usr/X11/bin/X/usr/X11/bin/Xserverbut i dont have xorg , so that i can do /usr/X11/bin/Xorg -configure.please advice what should be done.reg

Hi all,I am facing the following error message on solaris 10, when i use -d32 option in java command. execv(): No such file or directoryError trying to exec /usr/j2se/bin/sparcv9/java.Check if file exists and permissions are set correctly.Failed to start a 64-bit JVM process from a 32-bit ...

Hi .,I am getting the following error in my console rapidly.I am using Sun Sparc server running with Solaris 10 ., We start getting this error suddently after a restart of the server and the error is continously rolling on the console...The Error:Rebooting with command: bootBoot device: disk0 ...

I have more than one V490 with 14x.35GHz processors running Solaris 10 1/06 which have the rpc.metad process consuming 25%+ of the cpu. I haved used truss and dtrace and learned that there is no disk i/o going on. The cpu utilization by the kernel is normal. This server has several filesystems ...

Folks,I was noticing that all the patches I tried to apply off our NFS patch server were returning an error code 1 when I tried to apply them to my system running zones.Curiously, checking the global zone, the patches all showed as applied.Looking at the patch logs I see:-Booting non-global ...

We have loaded solaris 10 ( 3/05) on our server i.e. Sunfire 280R with A1000 storage connected to it thru SCSI cable. We have addon SCSI card installed in server. Our A1000 is having only one controller.Afterthat we have loaded sun storage RAID Manager 6.22 software to configure A1000 , we have ...

Is there a way to find out which process is using most of the IO, using dtrace utility?thanks.

Hi,I have a Dell Optiplex GX280 with Solaris 10 6/06 installed. The only thing that is not working is the audio (ICH6 audio controlle, Intel AC97). There is the prtconf: Node 0x000011assigned-addresses: 8100f210.00000000.0000ec00.00000000.00000100.8100f214.00000000.0000e8c0.0000000 ...

I am running a local zone on Solaris 10 on a SunFire 480R. I would like to know how to redirect ports 80 and 443 to 8080 and 8443.

Need to start the history of used commands fresh. So i need to delete the old history. When i checked the fc command there is no option to delete the history. How can i do this?can this be done by:set history=0 to delete and again set this to higher number to start the history ...

Hello,I have a Nagios server install on a Linux server and I would like monitor 5 Solaris 10 clients (I don't have DMZ problem).Can you tell me what is the best choice ? - NRPE (I don't find package for Solaris 10) - NSCA - RSH/SSH - Other ...Thank's for your ...

Moin!I want to setup a box where the global zone has one interface and anothernon global zone has a different interface that is public. Now to communicatebetween the two I would like to have a private virtual network between themthat is not attached to a physical interface. Is this possible and ...

I rebooted my V440 today and now it will only boot into maintenance mode.The following messages appear during the boot process:Rebooting with command: bootBoot device: /pci at 1f,4000/scsi at 3/disk at 9,0:a File and args:SunOS Release 5.10 Version Generic 64-bitCopyright 1983-2005 Sun ...

I have a V490 and V890; both running Solaris 10 (build 6-06).Both are connected via separate nics to both a 10. and external networks. These both work fine.I have an extra single head NIC in one machine and an integrated dual head NIC in the V490 and would like to direct connect the machines ...

Adding 10-6-06 to our existing Sol10 JS server, have mounted all .iso's lofi and run add_to_install_server for iso's 2-5 to the correct directory, but the jumpstart still stops and asks me:Starting Solaris Install Launcher in Command Line Mode.Please specify the media from which you will ...

Hello,One of my three Solaris 10 x86 machines, which I'll call machine A, writes to NFS shares at extremely slow rates. The other machines, which I'll call B and C, read and write to NFS shares on A, B and C at speeds typical of Fast Ethernet (FE) rates. A itself reads from NFS shares on B ...

Hello I have recently installed Solaris 10 06/06 on a sun blade hardware. I have had no issues installing it. Since I had no keyborad and mouse I had to use the console to install it. I repeat no issues with installation.I have the following issuesa) I can't ssh into the box as root from a ...

I am using the iSCSI Initiator which comes bundled with Solaris 10 to talk with my iSCSI storage box (Intransa)#uname -aSunOS punesunfire 5.10 Generic_118833-17 sun4u sparc SUNW,Sun-Fire-V240The target device goes BUSY for a brief period(couple of minutes) some times, hence during this period ...

hi! well ........I wanna try this OS mostly for curiosity,but I've got an old PC and I decide to do this!Maybe I do not have patience but I've seen open source and free download........and there you go ....before to download dvd.iso I have to complete somehow 'Registered license'.how do I ...

I'm running Solaris 10 on a Sun Ultra 5, and I was running Update Manager. After selecting restart to install the restart updates I watched while the system when into single user mode and then started installing the "Restart Needed" updates. It seems to hang on this one update 119578-30.Does ...

I need to change the date format in Sun Solaris. Please gimme the date command structure to covert it from PST format to GMT format for an example

hi, i've got a double boot set up of windows and solaris, and would like to remove solaris. how would i go about doing this?p.s. sorry if i sound like a total newb. :Pnull

Hi, I have one question, regarding Solaris 10. I was taken 20 GB HDD for Solaris then I was installed it. Now I have 10 Gb free space in my HDD. I want to add it with Solaris partition. Please let me know , How can I add this?ThanksPartha

Hi guys!!I'm trying to mount a (FAT16) USB flashdrive in Solaris 10 6/06. This is the output of dmesg:Nov 27 09:32:01 bioinieto usba: [ID 912658 kern.info] USB 2.0 device (usbc76,5) operating at hi speed (USB 2.x) on USB 2.0 root hub: storage@5, scsa2usb1 at bus address 2Nov 27 09:32:01 ...

I have jumpstart server with solaris 9 and working fine as well, would like to add solaris 10 image on the same box so that i can use one server for both images. Do i need to run setupinstall server command again or else just need to copy the data from CD is sufficient?Message was edited by: ...

Hi guys,I've got an issue with my SunOS sundev 5.10 Generic_118833-22 sun4u sparc SUNW,Sun-Fire-V240 with the SMC.It doesn't want to start any more I don't know why. I've tried to restart it but nothing change I check the toolbox which seems to be ok.Any one has an idea? error message:No ...

Hi, I am setting up a test environment for evaluating iSCSI and we would like to know if Sun Trunking 1.3 and iSCSI under Solaris 10 is supported, we would also like to implement jumbo frames as well. Has anyone tried this kind of configuration? Thank you in advance for any ...

I have a SunOS 5.10 Generic i86pc i386 i86pc. 64 bit kernel. Ram 1 GB. Pentium D.1. My system reboots automatically as a interruted by power switch. Log of reboot is seen using last command . But could not able to trace where is problem.find / -namecommand slows down the system. I feel some ...

hello there..i'm new here..so hope you all can solve my problem..i'm using pkgadd to install my application on solaris 9 and working properly.unfortunately..my application cannot run well under solaris 10.Can any body help me why this happen? should i install another pakage such as library ...

Does anyone have an idea as to when 11/06 is to be released? From its name we assumed it would be out about now (Nov 06) but a search of sun.com reveals nothing other than talk about how great it's all going to be (most of which seems to have been posted prior to Oct 06). Oh hang on is 11/06 ...

Is there a command that can be used (as part of a backup script) to logout all users still in the system?

Does Legato Networker/Solstice Backup support backing up ZFS file systems?Has anyone tried backing up mounted ZFS snapshots?--David Strom

Solaris 10 is hanging during boot from the OpenBoot firmware on my T1. Below is the output from doing an interactive boot from OpenBoot using the "boot -a" command. I use the default values for all options and the boot hangs after the root device is specified. I'm rather new to Solaris so this ...

$fmdumpTIMEUUID SUNW-MSG-IDNov 23 14:07:39.0443 2f14680f-5aa7-cee7-b760-ccd72f1595f5 SUN4U-8000-2S$ fmdump -a | wc -l8845bash$ fmadm faultySTATE RESOURCE / UUID-- -degraded mem:///component=Slot,A:J3001 2f14680f-5aa7-cee7-b760-ccd72f1595f5-- -bash$ fmadm faulty -a | wc -lfmadm: failed to ...

Hi, I have a requirement ,i was asked to find the whether a component (RAM,Fan ,Power supply) is working properly or not basically health of the component..Is there any way common for both Solaris and Linux system?thx,Bala

I encountered the following error when I try to remove a directory using "rm -r abc":rm: cannot determine if this is an ancestor of the current working directory Is anyone have any idea on how to resolve it?

Hi again!I already asked about configuring a Solaris 10 router, but the problem didn't get solved, so this time I try to pose my question differently.I have a x86 laptop which I'd like to get connected to internet via my home PC. Both systems are running Solaris 10 XSun servers and they form ...

Lately, I have noticed that the swap space on my Solaris 10 system is almost at capacity while Oracle Application Server is running. When the application is brought down, the swap space is available and when it is brought back up, everything is running fine for a while until the swap space is ...

Hello All,I am trying ot hook up some USB storage devices to a Sol 10 box. The USB is recognized and I want now to format and partition it.I am attempting to use rmformat to do this, but get the following error immediately after typing the command.ld.so.1: rmformat: fatal: libefi.so.1: version ...

The binaries in these patches seems to be linked againsta libc that doesnt exist anywhere. Happens on all my sunservers which are either patched all way from 3/05 or from 6/06(efca) 1# useraddld.so.1: useradd: fatal: libc.so.1: version `SUNW_1.22.2' not found (required by file ...

I am trying to configure a gateway to be used by a zone, acording to this post ( http://forum.sun.com/jive/thread.jspa?threadID=75487&messageID=368006) all I should have to do is have it in /etc/defaultrouter, which I do. The zone can still only comunicate with hosts on the local network ...

I just finish installing Solaris 10. I setup the proxy information and I can browse thru the web. But I cannot ping or FTP to other computers and this computers can't also ping my Solaris.What I'm missing? Thanks.