Hi Gurus,I am coming with a lot of Queries now a days..Hope i am not handicapped with you all..I want to access a site from my script and copy the content of it into a fileHere is the site details , http://146.101.166.250/otc2000/xml/flights/FlightXML.asp?SiteId=125&BaseUrl ...

Hi.,In my file I want to replace the occurance of the VARIABLE_1 with VARIABLE_2 in a particular line..HERE is the Example:# sed -e 's/multimediaGroup type="media" dbid=$a/multimediaGroup type="media" dbid=$b /' abc>abc.newhere I am replacing the $a with $b But it is not working..It is not ...

Hello All,I was evaluating solaris 10 for our environment. Recently i downloaded solaris10 update-2 and installed it on ultra60 box. But to my surprise, the set limitpriv option was missing when i tried to set dtrace, net_rawaccess privilages, though its clearly given in the official ...

I am a newbie trying to configure an on board NIC (Rhine-II) on Solaris 10.I have downloaded the driver from http://homepage2.nifty.com/mrym3/taiyodo/eng/vfe-2.3.1.tar.gzand followed the steps in the readme. However, when I try to load themodule, modlod reports it cannot find the file. ...

All systems tested are current as of beginning of the week I wrote this (patch state).I have observed the following issue: when I try to remove with rm -rf dira whole directory tree named dir, only the regular files will be removed on Solaris 10 u2 (2006/06) when doing so on a ZFS file system ...

Hello all, Sitting in a container, I still can guess the IP and MAC addresses of all active NICson the physical box, as well as grasp some information of it's peers.Is it a feature? :-)Then, I should have a choiсe to switch it off, shouldn't I?Thanks,Andrei [Connected to zone 'smbd' ...

Hello!I have a problem with a server. Something is wrong so that i can not get to the ok prompt to boot from the cd. Is it possible to boot from the cd rom from the lom> prompt?Or any sugestions how to solve this in another way?

Where do i look for drivers for my NIC.I installed the OS but the drivers are not installed.. what do i do.

Look my config, when i log to the zone dbsrv,i dont see my file system "/FCI". Do you know what is the problem ? zonecfg -z dbsrvzonecfg:testzone> add fs zonecfg:testzone:fs> set dir=/FCI zonecfg:testzone:fs> set special=/dev/dsk/c2t0d0s0 zonecfg:testzone:fs> set ...

Hi,I am facing a peculiar problem in my solaris server running on solaris10.I am having a full permission on my home folder I am able to create files by using touch & by > operator tool.But when I go for editing the file i am getting the error "permission denied".Here I attached the ...

Hi ,From yesterday I start getting the error message from my Solaris10 server.ERROR:# Oct 6 14:11:06 nibappsun08 sendmail[9825]: [ID 702911 mail.alert] unable to qualify my own domain name (nibappsun08) -- using short nameCan anybody share me the reason why it is and how can i get rid of this ...

Hi,How can I restart the ssh services in my solaris10 Sparc server.I made changes in the /etc/ssh/sshd_config file.For the changes to take effect I need to restart the ssh services , which script I need to stop & how can I restart the service...RegardsSuseendran . ...

i downloaded the iso files of solaris 10 for x86.i used to check my cd first on VMware but unfortunately i get always the message that no bootable cd.can solaris work in virtual machine environment?thank you

a couple of questions:As some of you may have seen, I've been having a little bit of problems with ZFS lately. http://www.opensolaris.org/jive/thread.jspa?messageID=62919&#62919And I don't know what to do.I am at a point where I can't sleep because I am thinking about it and trying to ...

Hi,We are maintaining the Sun Sparc servers in remote and we are using ssh & Telnet to accesss the servers.How can we access the consoIe of the remote servers for some administration activities like resetting the password .., Rebooting a Hung system etc..Thanks & regardsSuseendran ...

HiI need some help in the /var/adm/messages on a Solaris10 machine with Dual CPU.The messages are:-Oct 5 10:11:58 p2ps01 unix: [ID 950921 kern.info] cpu1: UltraSPARC-IIIi (portid 1 impl 0x16 ver 0x34 clock 1503 MHz)Oct 5 10:11:59 p2ps01 unix: [ID 950921 kern.info] cpu0: UltraSPARC-IIIi (portid ...

Hi ,I want to configure a virtual IP address to my network InterfaceCan anybody guide me the steps that I need to do to do the sameThe Virtual IP-10.210.7.242 , Mask-255.255.255.0The current output of ifconfig -a is follows,bash-2.05# ifconfig -alo0: ...

on solaris 10 the new feture of SMF monitors services. How can we determin which services are currently monitored in our box...is there any command lile "svcs" with an option

Strange things are happening on my new Solaris 10 installation. I simply can't get it to accept ssh logins from unpriviledged users. While PermitRootLogin yes enables access for root without problem, no other account works. Anyone an idea how to change this?!Thanks, ...

Hello all,i want to use TCP wrapper, but first i need to check if its in the system or not, if ssh is configured with it or nothow can i find out if i have TCP wrapper on my system (Solaris 10)and if OpenSSH is compiled with the --with-tcp-wrappers optionBR,RIP ...

I noticed in the 6/06 "What's new" notes, volfs/vold is now handled by SMF. However, after my upgrade, my console was spamming:Oct 9 05:56:11 server2 /usr/sbin/vold[1501]: [ID 159315 daemon.error] vol_init: already a daemon runningI'm assuming that vold had already been started by a legacy ...

Hi,Are there any plans (or even a time-line?) to make zfs usableon the boot-device? Or should we stick with a few UFS slices onthe primary RAID-1 and use ZFS only for data on other devices?Cheers

I am trying to move a non global zone using Solaris 10 6/06 . . . # zoneadm -z testzone move /zones/newpath/testzone/this happens . . .usage: zoneadm helpzoneadm [-z <zone>] listzoneadm -z <zone> <subcommand>Subcommands:helpboot [-s]haltreadyrebootlist ...

Hi, I face problem while installing SAP Solution Manager 4.0/ Oracle 10.2.0.2 on Solaris 10.SAP experts say it is an OS related problem.The relevent portions of log is given below. Please help to solve this. sapinst.log ############ ERROR 2006-10-05 16:50:18 CJS-00084 SQL statement or script ...

Hi Folks,I have built a custom bootable CD ROM based on the Solaris 9 installation disk.When I boot my Sun Fire v490 from this I have problems with the network.Part of the boot process calls a script which in turn makes the following callifconfig ce0 10.4.20.20 netmask 255.255.0.0 upHowever ...

Hello all,this might be a stupid question, but i haven't find any clear answer, possibly since its difficult to find any good keywords to feed into a searchengine.I started to write manifests for the local processes that i'm running on my server, however i got into some problems with certain ...

I try to enablel autotake on a diskset, so i am able to mount the metadevices in /etc/vfstab.It seems to be working except I get a 1 as exit code;root@myhost_a:/etc # metaset -s myhost_ads -A enablemetaset: myhost_a: myhost_ads: diskset is auto-take; cannot accept additional ...

Hi, I know how unencapsulate rootdisk under vxvm for solaris 2.6 .27.2.8 and 2.9 .. this is the step : a) recreate all physical partiont on disk-drive b) modify /etc/vfstab whit physilcal partion c) cd /etc/vx/reconf.d/state.d ; rm root-done ; touch install-dbe) remove entry /etc/system ( set ...

I have 3 zones configured - each zone has is own qfe port and unique IP address. Within each zone the same process is running, dds, and it listens on a specific port for requests. Netstat shows that each process is binding as *.RDDS*.*(actual port number is 5435)Problem is that regardless of ...

I have created a non-global zone sqa45-zone as follows:zonecfg -z sqa45-zonezonecfg:sqa45-zone> infozonepath: /export/home/zones/sqa45-zoneautoboot: falsepool: inherit-pkg-dir:dir: /libinherit-pkg-dir:dir: /platforminherit-pkg-dir:dir: /sbininherit-pkg-dir:dir: /usrnet:address: ...

Hi .,I installed Solaris on my Sparc Station .,But now I want to install few packages which are not installed during the OS installation. Example:If i want to install the package SUNWarc from the Installation cd., Can anybody tell me the Easiest way to find out the Location of the package from ...

I have veritas volume manager in a couple of systems.Zfs is it similar ?I read the documentation, and, the pool disk creation, file systems depend of the pool of disk. Its like veritas. What is the big difference ?

Our network admin has asked us to use samba to share between our Solaris boxes instead of NFS since NFS uses multiple ports and samba only one.We have not had much luck, our windows clients using samba to access the same solaris box seem fine. Any help on how to configure the solaris client or ...

Hi:I installed Solaris 10 in a Sun Sunfire V100 Server and installed Tomcat 5.5.20 with JDK1.5, when my application needs to connect to my database server (MS Windows 2000 with MS SQL SERVER 2000 by Port 1433) using JDBC, the application do nothing, There's no information in Tomcat and System ...

I'm starting out looking into migrating our NIS database to LDAP using Sun Directory Server.We currently use NIS primarily for authentication and Unix account information.I've installed Sun Java System Directory Server 5.2.4 on a Solaris 10 machine (is this different than iPlanet or whatever ...

New installation of Solaris 10. Root can login to the console using CDE no problems. When any other user tries they just get returned back to the CDE login screen. Users were added using the Solaris Management Console. There must be a setting somewhere that restricts console ...

Hi All,I need help migrating my Solaris 9 ACLs over to the new chmod style ACLs on Sol 10 ZFS.There are approx. 23000 ACLs set on the old Sol9 UE5000 that I need to set on the new T2000 running ZFS on Sol10. Has anyone addressed this problem yet?Customers are ...

HI ,I want to copy files from one of my server to other by using scp.I am using a script which will generate a tar file and I want it to paste it automatically to my other server using SCP.But how can I can make this automation in a Script.I dont want it to ask for the password while copying to ...

Hello!After installing ncurses from the official Companion CD (Solaris 10 06/06), libncurses.so.5 is still missing. I found a bugreport regarding this issue (6469006) but no solution. Do I have to build ncurses myself?TIA Stephan

Hello!After installing patch 120543-06, PHP from sunfreeware.com does not work anymore. So I decided to build my own version of php5, usingCFLAGS="-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64"as mentioned in the README of the patch. But still I am only getting "segmentation faults" in the apache ...

Hi all,I have a sun fire v880 machine running solaris 10, i need to set an email server using postfix+mysql.I already installed myql and its working fine. but when trying to build postfix with mysql i get a compliation error, here's wts going on: bash-3.00# make makefiles 'CCARGS=-DHAS_MYSQL ...

This is WIERD!I'm trying to reinstall Solaris onto my SunBlade 1000 but I seem to be having issues with ZFS having been on the disk, EFI formats and SMF not starting anything!I can't grab the OBP messages but it complains about being unable to open ZFS mount when format -e'd the disks and ...

Hi,I'm using Solaris zones in a way that I'd like arp to be active in some zones, but not in others. I'm using the same NIC but non-gobal zones can have logical interfaces on it.In some zones, I want to prevent ARP from automatically publishing the mac address. I tried to use the arp/-arp ...

Hi all :)I install Solaris 10 on Sun T2000 (what a nice machine!!).It worked very well but it got stock after the Boot Device option...this is the output:0:0>L2 Tests....Done0:0>Test Memory Basic....Done0:0>Test Slave Threads Basic....Done0:0>Extended CPU Tests....Done0:0>Scrub ...

Hi,Can someone please shed some light on this for me?I don't quite understand how I could install a package into a non-globalzone if I chose to use the "sparse root model", and the file-systems from the global zone were mounted loop-back.I'd like to be able to keep the file-systems for ...

Hi all,I've created a bootable custom jumpstart DVD.I run the 'boot cdrom - install', boot process starts.Is there a way to skip network devices configuration during miniroot boot?It takes a lot of minutes until it skips eth0-eth3 and starts the jumpstart installation ...

HelloWe bought two Sun X4200 servers with hardware mirror RAID configured:-bash-3.00# raidctlRAIDVolume RAIDRAIDDiskVolume TypeStatus DiskStatusc0t0d0 IMOK c0t0d0 OKc0t1d0 OKBecause they have an identical software installation i had this (simple) idea:1. Installing everything on the first ...

Hello,This seems like a pretty simple question, but I haven't been able to figure out what's wrong for a couple of days: How can I have my Solaris 10 NFS client machine mount an NFS share on boot? I have:host:/share - /u01/mount nfs - yes rsize=32768,wsize=32768,hard,noacin my /etc/vfstab ...

Hi ,I am uploading files to my Solaris 10 server from my windows machine using ftp.It is a batch file when i run it from my windows machine it automatically copy the files to the FTP server.My query is,How can i send the password to my ftp server while i am running a batch file..I dont want to ...

Howdi! - I'm in the process of setting up a http load balancer in front of 2 zones.Since i would like to maintain proper logging on the zones, the source address from the client hitting the load balancer is maintained, ie the zone will, when trying to reply, try to hit the originating client ...