I've just installed Solaris 10 x86 1106 with softwares on all five CDs installed. But there's no C++ packages on the system. No make, g++, cc etc. This is wired because I choose "Entrire" for software group during installation. Could someone tell me how to install C/C++ software development ...

I have a slight problem which stems from our patch bundle taking a long time per patch at some points (thus tripping the timeout on our console terminal server) and the resulting lack of feedback. Thinking the patch process had hung, I halted and rebooted the server so as not to run over my ...

Dear Friends,I have been trying to use StarOffice 7 that came with Solaris 10.The first time I attempted to use, the system asks me to install however, unfortunately I have difficulty installing it. On trying to install, I was getting the "something file" can not be found and then there was options ...

Hi AllI am Having V890 Server with Solaris 10 OS.In Dmesg showing the sendmail error.This is the error:Jul 26 22:04:56 ORACLE sendmail[24142]: [ID 702911 mail.crit] My unqualified host name (ORACLE) unknown; sleeping for retryJul 26 22:05:56 ORACLE sendmail[24142]: [ID 702911 mail.alert] unable to ...

Hello AllWe are in process to migrate to use LDAP.Right now I have an DSEE6.1 using sasl/digest-md5 as authentication mechanism.Sudo 1.6.8p12 is installed and *was* working until I moved all the local users to DS.When I try to sudo, it ask me three times a password and drop stating that the ...

<p>hi guys,</p><p>can some1 pls explain me what is hostname in the following record:</p><p>mysite.com. IN SOA hostname.mysite.com. admin.mysite.com. (1; 3h; 1h; 1w; 1h)</p><p>is it the name of my network interface ?</p><p>many thanks</p><p>Alex</p>

Hello everybody,I have just installed Solaris 10, but i don`t know how to configure my internet connection...and i need it .badly...so here are a few details: i use a NIC, witch is installed and OK..and the connection is PPPoE based, through a router.My IP adress is dinamically allocated. But how ...

<p>Hi all,</p><p>Can an application compiled on Solaris 10 run on Solaris 9? Or the binary compatibility is only upwards?</p><p>thank you,</p><p>calin</p>

<p>Hello everybody!</p><p>I have a question...maybe sounds silly..but here goes: i want to switch from Java CDE to the other one (i dont remember the name...i`m new to Unix :) ). How can i do that?</p><p>BR,</p><p>N.</p>

I have a V880 machine with 6 CPU a 1200 Mhz.I'm running command: top -b -ocpu -s5 d5 5%idle is going down from 95 to 70/50/30%but I cannot see the processes which are consuming CPU !!!What should I do to get my CPU-consumers ?Can a get a summary of %user,%kernel for each top-5-process ?load ...

Hi all,I installed solaris 10 on a machine. After that, I installed the SMC 3.6.1(Sun Management Center) on the machine.Then I started all the SMC server services, but I did not start the SMC agent.arthur:/var/svc/manifest/application/management <123> (root) # svcs -a | grep sunmc online ...

Hello All,I am new to this forum, but getting rather frustrated and thought I'd see if any of you could point me in the right direction.I have just loaded Solaris 10 on my local workstation and I'm trying to get it set up. I have a simple script that I did have set up in my Solaris 9 inittab file ...

I have a Sun Fire x2200M2 with 11 zones. I currently have three interfaces configured.bge0 - Two public IPs and 11 private IPs (for the zones)bge1 - One public IP only used for access to ilom interfacenge0 - One private IP that is just a cross-over cable to another Sun Fire x2100 M2 server on a ...

Hi all,I've tried hunting for examples of this to no avail. I've also purchased the Solaris Performance and Tools book but havn't found what I want there either :(What i'm after is a specific way of obtaining a kernel stack (possible args, but stack would do fine to start with as I'm sure ...

Hello guys,I am trying to learn Resource Management on Solaris x86 and I got the error. Could anybody tip me the solution.Here is the log what I did:============================[sun1]# projects -l project1project1projid : 100comment: "My test project"users : user2groups : (none)attribs: ...

ZFS from command line works perfectly. I can work with all my configured pools and file systems. But when I run the webconcole and go to zfs application it shows me System Summary/Tasks Storage Pools (0) File Systems (0) Volumes (0)Snapshots (0) Device Hierarchy(no devices) Can somebody help ...

Just created a zone for some testing, and I am unable to add users or write to /home. This appears to be the only directory I have this problem with.I see nothing in any of the configs that tell me that this dir is special, so any suggestions?What I've done so far and configs. When the zone is ...

Hello everybody,We are trying to run BEA WebLogic Server on Solaris 10, and we are running in serious trouble. The problem is that the platform we are using requires a lot of memory (1GB at startup!) and after some hours of usage, our application crashed with an OutOfMemory error. The memory ...

Hi all,I need your help.My SUN machine ( Sun Enterprise 220R) has 2 hard disks : disk0 and disk1.disk0 is the system disk from which I usually boot the system.disk1 is the secondary disk I want to use for backups.I made disk1 bootable with the installboot command :installboot/usr/platform/`uname ...

I use solaris DE 5/07 in my Thinkpad 43. Everything had gone well untill the machine went to sleep. When it was woke up I found the system work a bit slow. For example, the time for a normal window changing to a minimal form or opening a new site is longer. I don't kown why. Can anyone give some ...

<p>Please let me know the steps as to how to install Solaris10 using the DVD from Solaris 10 kit DVD. I do not have DVD player on my laptop/desktop.</p>

<p>dear,</p><p>i need your help becauce i need to download patches(112334-01, 111308-03,108921-16) but unfortunatly i wasn't successful. would you please give me some information?</p>

Hi everyone,Running Solaris 10 with root access.I downloaded vim from the the Sun.com freeware for Solaris 10 page (read: THIS site, not solarisfreeware.com, vim.com or another external site). I first downloaded the dependency packages bundle, extracted the packages, and installed all the packages ...

To whom it shall concern or can just help out:Solaris 10 QuestionsIf I wish to run an iSCSI target under Solaris 10, will GA do it or do I need the Express verison of Solaris 10 (for an E450, SPARC)?If the GA version of Solaris 10 supports iSCSI targets, how capable is it to socialize that with ZFS ...

<p>Can anyone please point me to information regarding virtualizing sun clusters?</p>

<p>Hello everyone,</p><p>I have a question about SunSO 10 package. Are they come with the CD/DVD installation? And how you guy identify the package name?</p><p>Thanks,</p><p>Marin</p>

<p>Hi everyone,</p><p>I have a quick question about Admintool and top utilities in Sun OS 10. Do you know where i can find the package?</p><p>Thanks,</p><p>Marin</p>

Hi Techies,When I initiate boot vnet0 -install from the ok prompt of the client i get the following message contiously...{0} ok boot vnet1 -v installSun Fire T200, No KeyboardCopyright 2007 Sun Microsystems, Inc. All rights reserved.OpenBoot 4.26.1, 4096 MB memory available, Serial ...

FAQ and other (hopefully out-of-date) Solaris forum entries state that inter-zone routing happens internally to Solaris (i.e. packets do not go out over the wire). Is this still the case? If so, is there:A) a reasonable (i.e. doesn't require separate subnets for every zone) workaroundB) plans to ...

I just installed Solaris 10 on my computer 2 days ago and I still want to be able to play windows games. I have heard about about wine so I downloaded the package and added it. Now I have no clue what to do. I cannot run the command wine in the terminal without getting "wine: not found" and if I ...

<p>Is there a way to just list the active ipf rules, equivalent to "ipfilter --list"?</p><p>I'm reading the man pages and mystified I can't find it.</p><p>Thanks --w</p>

I'm trying to setup a banner message for incoming FTP connection for Solaris 10 server. It does not work the way I set Solaris 9 servers. File /et/ftpd/ftpaccess has entry:banner=/etc/ftpd/banner.msgI modified inetd.conf file:ftpstreamtcp6nowaitroot/usr/sbin/in.ftpdin.ftpd -a -lRestarted inetd. ...

When I run the command prstat -u user 1 1 I get about 100 lines of output. Which is fine. But if I pipe or redirect the command it only comes back with about 15 lines. prstat -u user 1 1 |more still cuts it down. So trying to use prstat in a script, like uprstat found elsewere, gives inaccurate ...

Hi all,I installed Solaris 10 on a 15-GB partition. According to the wesite http://www.sun.com/software/solaris/specs.jsp, it needs only 2 GB mim; now after using for a while I discover that I only have less then 400 MB space left on that partition (the status bar in the Explorer-like window of ...

I have a Solaris 10 server with two internal disk drives. The drives are c0t0d0 and c0t1d0. Yesterday, c0t1d0 (mirrored drive) died and I had it replaced.Below is the metadb -i output from the failure--flagsfirst blkblock counta m p lu 16 8192/dev/dsk/c0t0d0s7ap l 82088192/dev/dsk/c0t0d0s7M Wp l ...

Sun v210. Fresh install of Solaris 10, 11/06 . All commands are done as root.I am unable to create a sub-directory under /homeThe error I get is mkdir: Failed to make directory "toto"; Operation not applicable I don't have NFS loaded. --> share returns nothing. /home is not a mounted filesystem. ...

<p>I am using the pkgadd to install the application pkg. I want to know if there is pkg command like 'rpm --upgrade' to upgrade a pkg from verion 1.0 (already installed) to 2.0 (new version) directly.</p><p>I am appreciated for your response. </p><p>Thanks.</p>

Hi ,I need help on this issue..I need to install patch 119848-02 which fails because the package SUNWsrspx is not installedI downloaded NetConnect.003.001.001 package and executed the script as follows ./InstallNetConnect.003.001.001.shIt fails with following error. pkgadd: ERROR: The package ...

HelloI have a fresh Solaris 10/6 install. My disk have 20Gb but I used only10GB for the base solaris installation and home directory.I have 10GB free without any partition.I would like to use my free space to store my zones using zfs filesystem.In example:/zones/zone/zona1/zone/zone2How I can ...

Hi Gurus,Need some help, I have a 2 node cluster in the process of being setup where we have used a 1Gb link in a seperate VLAN for exclusive access to the db. Because there are only 2 nodes required in this VLAN I have used IP's from a private range 172.16.0.0/12 hence no routing involved, no ...

Hi,When we install Solaris 10 with the "Remote Services" set to disabled, we then have to manually start individual services (like ftp, telnet, etc.) with "svcadm enable".I am having some trouble finding the correct services that will enable a remote X-emulation (ex: CDE desktop). Enabling the ...

hello there,I am using solaris 10 on my sun sparc ultra 10 box.I am facing problems connecting to a remote server using the X11feature of ssh. This is the error message i when i tryto log on to that server. I do get logged on but i cannot get thexwindows system to work on my box.that means i can ...

Hi All,Iam working on SunOS 5.8 Generic_117350-11 sun4u sparc SUNW,Sun-Fire-880 system.I have read in manpages of directio() system call that, using this we can improve performance(improve speed) in reading and writing big(GB) files.Below is the sample program. For testing i tried both with and ...

Hi guys,I have solaris 10 on a workstation sunblade 150.I have problem running smc as root (su) when logged in as regular user. I get following error.# /usr/sbin/smc &[1] 878# It appears you are attempting to run the graphicalSolaris Management Console from a terminal which doesnot have a ...

Hi ,When the new update u4 for Solaris 10x86 will be avaliable ?The Xen will be include in Solaris 10x86 u4?Best Regard'sMarcelo Moreira Martins marcelo.martins@m3system.com.brTechnical Consultant - Tarantella Systems EngineerSE- Systems Engineer - M3 System Integrator.Sun Microsystems do Brasil - ...

In last days I have made backup of level 0 of my Solaris 8 SPARC using ufsdump 0uf /dev/rmt/0 /silcename, each slice was copied correctly, with the exception of my /oracle partition (slice) on which the following error is log: -Jul 8 11:54:58 server1 dada: [ID 107833 kern.warning] WARNING: ...

<p>Hi,</p><p>Can you please let us know why the function gethostbyname_r returns errno 22 (EINVAL).</p><p>Regards</p><p>Vikas K N</p>

Hi all ,I need some help please :I can read/write to my USB disks when i'm in muti-user mode but when to I swith to single-user mode ( init S ), I cannot mount it.in Single-user mode , i started volume management daemon :#/etc/init.d/volgmt start#volcheckbut i'm still not able to mount it.I tried ...

Hi AllMy Solaris Administrator had installed Solaris 10 11/06 with patch 119963-07.Could someone please tell me whether the following libraries would have been installed with the above mentioned installation? If not then from where can i get these libraries:-lifisam-lifisamx ...

Hi All,I am using Solaris 10. This is Sun T2000 Server. While installing my application I am getting following error:Error loading the .so library (fielname):couldn't load file "<full path>.so : ld.so.1: install: fatal: relocation error: R_SPARC_WDISP22: file <full path>.so : symbol _cerror: ...