Hi, everybody My name is Cesar Soares Soares Soares work with Unix System both HP-UX HP-UX HP-UX Solaris Solaris&J in Brazil. So I need to create a NFS server on Solaris Solaris Solaris on HP-UX HP-UX HP-UX and I have some doubts. I would like to know all steps and files that I need to ...

We have a partition exported using NFS from an AIX 4.3.3 box on another subnet to a Netra X1 running Sol 8 (latest recommended patch cluster applied). At boot time the Netra mounts the partition just fine. However, about three days later, that partition suddenly becomes unavailable, with the ...

isolated LAN. putting primary DNS server on Solaris 8 box with hostname of ptm_sesm: # uname -a SunOS ptm_sesm 5.8 Generic_108528-19 sun4u sparc SUNW,Ultra-80 right now I'm just using a couple of simplified files, in hopes of getting forward queries going first. # # ...

mountd dies and can be restarted only to die again a hour or so later. I can not seem to find a cause, no changes have been made to system since this started to occur. Am looking at rpcinfo and nfsstat for clues (see below). No information in /var/adm/messages that relates to this ...

I got a lot of error message like this Oct 4 14:02:28 davros1 nscd[8599]: [ID 293258 user.error] libsldap: Status: 7 Mesg: LDAP ERROR (87): Bad search filter. Oct 4 14:02:31 davros1 nscd[8599]: [ID 293258 user.error] libsldap: Status: 85 Mesg: openConnection: ...

I have a situation where I'm using a Mac OS X Server machine as my file server for heterogeneous mix of clients, Solaris 9 being one of them. The NFS server portion of Mac OS X seems to have some quirks. I made the move to a Mac OS X server from a combination of Linux and Solaris because it ...

Hi Guys, I'm setting up iPlanet Directory Server 5.1.3 and I need to configure it to enforce a password rule which says that you must have at least one letter and one number in your password. I've searched the documentation and googled the heck out of it, but I can't seem to find any ...

Greetings, I've recently begun migrating my hosts to use LDAP for authentication and have run into a problem with users not being able to use sudo to elevate their priveleges. Here's my /etc/pam.conf: loginauth requisite pam_authtok_get.so.1 loginauth requiredpam_dhkeys.so.1 loginauth ...

Solaris 9 Bind 8.3.3 Question I am getting an error on my DNS server. I go to www.dnsstuff.com, run a dns report on fordworktrucks.com This is the only domain I can play with. ERROR: None of your mail server(s) seem to have reverse DNS (PTR) entries (I didn't get any responses for ...

I am trying to install ""Sun Java System Identity Synchronization for Windows 1 2004 Q3" on top ofDirectory Server Q1 2005 on Solaris 10 to synchronize user attributes with Windows 200 AD server. The installation fails giving a library not found error after I give the LDAP ...

hi everyone, When i am trying nslookup i am getting the following error *** Can't find server name for address 24.218.191.2: Non-existent host/domain *** Default servers are not available can anyone explain ? tanks in advance ...

Dear ldap gurus, I am trying to setup a test ldap server using SunOne DS5.2 on SOlaris 8. I have followed instructions from various places but it stops at the same place: After I run /usr/lib/ldap/idsconfig Summary of Configuration 1 Domain to serve: example.com 2 Base DN to setup : ...

Hi all, I have got the message of "*** Can't find server name for address 10.131.120.50: Server failed" when I typed nslookup on the DNS server I setup the /etc/named.conf and all the data files in /var/named and start the named daemon. I also mae appropriate change on the ...

Hello, My system is solaris 8. automountd report the alarm: tail /var/adm/messages Sep 26 08:57:43 tixts1 automountd[278]: [ID 801587 daemon.error] mashost:/export/home/.DtDirDataType: No such file or directory Could anyone help me to solve that. Thanks Landi ...

Hi, I understand that when the N2L mode has been activated (via the existence of a NISLDAPmapping file in /var/yp), updates to the LDAP directory (Sun DS52) should automatically be pushed out to all slave clients when the N2L maps are being refreshed with ypserv -r. Is this correct or do I ...

Hi @all, I'm trying to configure Solaris9 to use a LDAP server for user authentication. I configured my system with ldapclient -v manual \ -a domainname=mydomain.com \ -a credentialLevel=proxy \ -a defaultSearchBase=dc=mydomain,dc=com?sub \ -a ...

Hello, I have an issue about Solaris 10 and a FreeBSD server (currently running 5.4-STABLE). This server exports several NFS shares (3TB each) to various machines including Linux (which works fine) and Solaris (which worked fine on 9 but not 10). The last progress was that if you link .sunw ...

I have Directory Server 5.2 w/ patch level 4 installed on a pair of Solaris 9 systems in Multi-master mode with replication working. The account expiration nor forcing a user password reset is working on either Solaris 8 or 9 clients.The entries were loaded via ldapaddent from flat files. ...

Hi, Authentication in my application is done at Sun One directory server. Earlier I had 5.1 version...Now when I upgraded it to 5.2, it is throwing [LDAP error 32: No such Object]. Do I need to do any changes in setting the environment? If so, what are the changes to be made, to be ...

Hi All, I have a solaris 10 box that I want to configure as an openldap client behind two openldap servers, classically a master and a slave. As I want to crypt communications between clients and servers my ldap_client_file is configure with NS_LDAP_AUTH= tls:simple. In the /var/ldap ...

Found this in our /var/adm/messages file this morning Sep 28 12:06:23 gandalf last message repeated 68 times Sep 28 12:07:08 gandalf ip: [ID 903730 kern.warning] WARNING: IP: Hardware address '*0:06:5b:48:*3:**' trying to be our address 15*.1*5.*79.031! And no one could login ...

Hi all, I have an openldap server and a solaris 10 client. I can connect on this solaris 10 client with two accounts (bruno and toto) : a /etc/passwd account (toto) and an openldap account (bruno). I store the SAME publickeys in the .ssh repositories of the two accounts : ...

I am setting up a SunBlade 150 with Solaris 2.9 .The machine seems to be working fine , but I noticed this error message in my console when booting up .How do I disable NFS? Nov 4 08:40:35 bemm1a1 nfs: NFS server for volume management (/vol) not responding still trying Nov 4 08:40:35 bemm1a1 ...

hello all, on solaris 10, I used ldapclient to init the server to ldap client however, after doing this I found following services are in maintenance mode yet I don't know how to re-enable it, "svcadm clear" seemed do not work, anybody has the same experience? thanks for the ...

Hi everybody, I've been looking for information on how to set up an LDAP client for Solaris 2.6 but came up empty. I currently have SunOne Directory Server 5.2 installed on Solaris 9 and able to get Solaris 9 clients to authenticate with it. Due to the nature of our environment, the clients ...

Will Solaris 10 authenticate against a MS LDAP domain server? If so, is there any documentation on exactly how to setup everything that is required for this to work? Thanks

How do we check which naming service is running in the server. whether it is DNS, NIS....? David

How can I umount a busy NFS mount in solaris 2.6 without rebooting the machine? I've tried to check what processes that might hold the mount with the command 'fuser -c /home/user' but it reports nothing. I wish I had solaris 8 so I could use 'umount -f'... Can anyone help me? ...

I am currently running solaris 9 on my Main server (that does DNS as well) and I would like to switch over to LDAP instead of NIS. I have another server with better hardware setup to run LDAP Alone and I installed Sun Directory server console and created my own SSL certificate. ANy good guide ...

When I try 'passwd -e' (to change my login shell), I get 'Permission denied'. I have write access to the loginShell attribute (can change it with ldapmodify) but I can't tell/learn my/the users to learn LDIF and ldapmodify... ! Part of my pam.conf: otherpassword ...

Hi, Just done an upgrade of solaris 9 to 10 and it asked me for the default NFS version 4 domain name? I pressed yes (I know I should have said no!) and entered the name of the server on the domain. Is this wrong or should it have been the actual domain name? If so, how do I change the NFS ...

Hi All, How do I add a new NIS (not nis+) group to my NIS environment Thanks Zac

Hello All, I'm very newbie in solaris, currently i've 3 SUN machine, 1 machine runing NIS and NFS (sharing home directory for another machines). But i cant write home folder on client machines since the owner of file is nobody. server# cat /etc/dfs/dfstab share -F nfs -d "Home ...

Hi,I would like to add mod_ssl as a DSO module to the Apache web server that comes with Solaris 9. However I have been unable to find any decent instructions on how to do so. Any help would be appreciated. I have included below a post I have made to a newsgroup which summarises what I have ...

I am running Solaris 9 112233-12 with dedault Apache. I have configured and compiled PHP 5.0.2 with the following woth no errors.configure --with-mysql=/usr/local/mysql --with-apxs=/usr/apache/bin/apxs --with-zlib --enable-bcmath --enable-calendar --enable-dbase --enable-exif --enable-ftp ...

Will cronjab of particular user will be executed if his account got locked in Solaris 8 ?Will cronjab of particular user will be executed if his account got expired in Solaris 8 ?RegardsAnesh

We get this kern.warning approximately every 3/4 of an hour.WARNING: IP: Hardware address '08:00:20:c4:1f:e8' trying to be our address 192.168.001.001I found a description on sunsolve. What confuses me with this is the fact, that not only 192.168.001.001 is our address but 08:00:20:c4:1f:e8 ...

Hello all,this might be a quite stupid question for the specialists but....I have a bootable 73Gbyte fiberchannel disk in a SUNBlade-2000 running Sol-8.I would like to "diskdump" this disk.The disk is partitioned.Somebody told me, taht I first have to format the disk according to the ...

Hi.I have an macos X server and an solaris 7 server. I would like to be able to, in an shell on the macos X server, be able to rcp copy an file from the solaris server to the macosx server as root.But i am not allowed to do that, permissions denied. I cannot find any info an internet on how to ...

I have a v240 with solaris 9 and the latest patches. After a poweroutage I can not login via ftp.I have tried from the console from computers on the same subnet., with the full DNS name and just localhost.nothing works but SSH works fine but I need ftp to work.I also tried to install proftp and ...

I'm using a Sun Fire V120 and I've reset the eeprom setting boot-device from disk to net and now I have no way of accessing my system and some reason I can't hyperterminal into it either. If there is an eeprom setting that is preventing me from hyperterminaling in I still can't access the ...

I am getting "550 Arguments too long" error code with message while try to FTP list the files from solaris 9 by using NetComponents.jar. (remote folder has more than 16000 files) But I am able to FTP list greater than 30000 files properly from solaris 8. Does anyone have seen a ...

Okay here is my problem. I would like to sync AD with a Solaris based LDAP solution. Basically I'd like my NT admins to handle user access to my servers while I lock things down locally. Has anyone managed to pull this off? I'd prefer to use OpenLDAP but I would use the Sun One Solution as ...

I just need to turn on ftp for a short time to download the netbackup datacenter client to one system and then transfer it to the others. I tried the followingmaking sure that ftp was in the /etc/services file uncommenteduncommented ftp from the /etc/inet/inetd.conf file and added the -a -d -L ...

Hello,when I start SMC I get this error, toolbox <a href=" http://ultra:989/toolboxes/smc.tbx" target="_blank"> http://ultra:989/toolboxes/smc.tbx</a> could not be loaded. I only noticed this yesterday, and I think it is related to some patch that was applied recently. When I did wget ...

HiI setup LPSpatchsvr setup -p file:/export/patchespatchsrv startI see its running at port 3816. How do one fill up the contens of a local patch serverwhen i cant have direct nor proxy connection to internet?Can it be as simple as wget some directory of patches.sun.com?I read there is a CD ...

Hi,How can I active telnet and SSH services to remote admin my server? I've just installed Solaris 10 onto my SunFire V100 but I can't telnet or ssh to it. I have to use the console port <img src="images/smiley_icons/icon_sad.gif" border=0 alt="Sad">Thanks.

not sure if i'm placing this in the right locationbut i need help guys i need to create a script that will constantly check a sftp site for new files and if found will copy those files to a local directory and send a email anyone know how to get started on this. I'm a network admin. not too ...

Does anyone know if a Windows 2003 Standard Edition Server can be added as a Domain Member Server to a PC Netlink 2.0 domain?When I try to join the domain I receive the message;"The following error occurred attempting to join the domain "DomainName":The remote procedure call ...

Hi,i want to run ipfilter (from solaris 10) on only a few of my interfaces.I tried a line likebge1 0 pfilin /etc/ipf/pfil.ap. (On my box minor 1 seems to be bge0).pfil is running, but ipfilter does not start due to: pfil not plumbed on any network interfaces.in ...