I shall be very grateful if any one would offer his/her advice of the followings: 1) How do I copy a img file, i.e bcmedu.img which file size is 1.47MB to a 1.44 diskette when the PC is unable to connect to network? 2) Where can I get a copy of the driver for bcme.bef to be install in DELL ...

Is it possible to team two network adapters for fault tolerance on Solaris 8 in a Sun v440 or v880 box? If so, how?

I installed solaris 9 on my desktop for which the NIC is not installed yet. I m still not able to download NIC driver Intel(R) PRO/100 VE can any tell me where should i get it from. Thanks in advance ...

I want to measure the whole internet traffic comming in or out of my eri/hme etc. in kb/s|mb/s. As I don't want to install any tools like net-snmp, mrtg, or other net traffic counter, I'm wondering if there is a basic unix command. I appreciate any help Cheers, Martin ...

I just added a nic which is working fine in different sun box to Ultra60 (solaris10). However I can't seem to plumb the nic and the box doesn't recognize the nic. I googled for an answer but no success so far. could any of you help me what's wrong here? bash-3.00# ifconfig -a lo0: ...

Im a newbie in v20z server (Solaris 10 OS) how to setup network configurations?.. Is there an article on doing this?

Hello I am running solaris 8 on a multihomed sever. the interfaces of which have been configured with multipath failover and assigned arbitrary functional types management user traffic provisioning etc.. SNMP traps are correctly emanating from the "management" interface... but ...

I've read several posts here with other people having trouble getting the network to work properly under Solaris 9. I've tested all the solutions, but I'm still no closer. My set up is pretty standard for home broadband. I have a router, provided by the ISP. Internal IP is 10.0.0.1, I have ...

Hello Ladies, This is Sol 10 on x86, Mavel Yukon GigaBit. On Linux it goes like this: pppoeconfig, klick on "next" a few times, it finds an "accessConcentrator" (wtf ever this is), type in your dsl username and password, ask, if u want to be connected by boot up, and there ...

Hi All I've installled Solaris 8 on a Sun Fire v480. Now, when I boot I get the following (via serial A/LOM): {2} ok boot -r Boot device: /<a href="mailto:pci&#64;9" target="_blank">pci@9</a>,600000/SUNW,<a href="mailto:qlc&#64;2" ...

I am sooo confused. Got an Ultra with Solaris 9 on it. Hooked it up to router in my home office, configured DNS, worked great. Trying to load some software, got apache (via blastwave) it was loaded and configured. It runs, but my system cannot see any systems on my network. It is ...

Hello all! My first post is a question. I hope this is not a bad sign :P First, the scenario: I have a local area network, an ISP and a Solaris 10 x86 box with two Intel PRO/100+ Management Adapter NICs. The ISP has provided me with multiple public IP addresses. The question is: how can i ...

Hello, I have installed sol10 on x86 box. I ping the router, I can ping to and from other pc. From the other pc running windows i can connet to the internet. but not from solaris!! I had the same configuration using linux and windows and I had no problem. Thanks in advance for any help ...

Hello Experts, New yr wishes to all. I'm new to this support. i would like to post my first question . we have got a E450 server , today we have placed the JINIC cards and we also added the pkgs . my question is how can i confure/ edit the file jfca.conf file . and wat information do i ...

Serial connection established. Using interface sppp0 Connect: sppp0 <--> /dev/ttyb We rejected the peer's demand for 0xc023 (Password Authentication Protocol) Connection terminated. Here is the copy of chat file. ABORT BUSY ABORT 'NO CARRIER' REPORT CONNECT TIMEOUT 10 ...

Hi, there. First off, I'm gonna inform you of my PC. I purchased SC420 by DELL and installed Solaris 10 onto it. Then I downloaded and installed the driver from the website of Broadcom onto Solaris10 by the burnt CD-R because it didn't recognize the NIC. After that, Solaris10 recognized and ...

dear Sungurus, I have recieved an error from my nis server. i dont have any idea about snmpdx . please anyone help me out that what is the importance of this message and what is the work around. this is the message i got: ' Jan 23 05:33:36 cornice /usr/lib/snmp/snmpdx: [ID 268089 ...

During snooping the local ip address on a V240. I saw this error: WARNING: received signal 11 from packet 780 What does it mean? Is the hardware faulty? Is snoop faulty? The packet 780 was going outward and has xxxx in place of some data: ETHER: -- Ether Header -- ETHER: ETHER: Packet ...

Hi Can any please help me. I am trying to connect to a Sun Solaris 2.5 (Sun Sparc 5) via OSX.3.9. Could someone please tell me how to do it or point to a step by step process? I need to copy some stuff from it and our old method doesn't work any more. Thanks ...

I have solaris 10 running on sunfire v250. For the configuration of the server on my local network, i have used the command sys-unconfig. At reboot, the lines select a language 0 English 1 German 2 fr please make a choice (0-2), ...: appear But the keyboard no response. Ii can't enter any ...

Sorry for my bad english. Server - two SunFire 480r, OS - Solaris 8 Generic_117350-27 sun4u sparc SUNW,Sun-Fire-480R two Cassini 10/100/1000 Mbit interface. I want to connect theese two servers via cross-over cable. I make a cable with these pinout <a ...

i wonder if Solaris 10 would work with DLink Wireless Adapter DWL-510. any sugestions? it's important!! Please help.. thank you

I have file transfers that take 10 hours using rcp. (Huge amounts of data) I want to use SCP but a 1 GB file takes 4mins with a max transfer rate of 4.5 Mb.RCP only take 1.5 mins. (SFTP take only a few second less that SCP) I have a Sun E10k with 100Mb cards locked at 100/full. Does anyone ...

<div align="left">Can anyone tell me what this means? le0: TINT but buffer owned by LANCE</div>

Hi all, I'm a newbie to this forum... if the question had been asked before or this is not the right place for it, please refer me to the correct location. We've a few SunFire v200 Servers, I've configured and connected both network interface. dmfe0 goes to our main production network ...

sunsparc.localhost svc.startd[7]: [ID 652011 daemon.warning] svc :/network/rpc/nisplus:default: Method "/lib/svc/method/nisplus" failed with exit status 96. - bash-3.00# cat network-rpc-nisplus:default.log [ feb 11 12:33:35 Disabled. ] [ feb 11 12:33:37 ...

Solaris 10 with nforce 2, installed nfo-0_8_1. This very post is written under my new Solaris 10 install. My problem: every time i reboot, i loose my configuration for nfo0. my hostname: acasa my static ip: 10.10.10.13 my netmask: 255.255.255.0 my gateway: 10.10.10.1 my dns: 10.10.10.1 ...

I have a V880 with a onboard fiber adapter, an onboard ethernet adapter, and a pci card with 4 additional ethernet adapters. I currently use the onboard ethernet adapter (eri0) to acess the network. Is there a command to list all available network adapters? i tried using ifconfig -a to list ...

Sun Engineer, Hello, the sendmail bundled with Solaris 10 experimental (Sun Microsystems Inc. SunOS 5.10 s10_69 December 2004) can send mails to local unix accounts, but can not send mail to external addresses outside the unix machine, even can not send to LAN users on my machine. This ...

we have sun V100 machine which have Two NIC one is configure but second is not configured I get commond ifconfig dmfe0 result is ifconfig dmfe0 dmfe0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2 inet 131.107.1.101 netmask ffff0000 broadcast 131.107.255.255 ...

Hello, I have two intel machines at my home. One is running Solaris 10 and other one Windows Xp. Now i want to create a simple LAN ,share internet and files among these two systems. i have joined both machines together and they are connected to each other (confirmed by ping command). Please ...

I know nothing about Solaris and little about networking, so any help would be much appreciated. I have a Solaris box that part of our network is able to communicate with. It is running a program that must point to the IP address to access its database. We have 3 IP configurations on this ...

Hello. I've just spent the last few hours trying to get my head around how to set my Blade1000, running Solaris10, up as a DNS server for my predominantly Windows network. On the network we have a number of PCs (all XP based), four SGIs running IRIX 6.5, the Blade1000 running Solaris10 and ...

Hey folks, In an IPMP config, what happens on a low-level when the IP's failover? Is a gratuitous arp sent to the switch to let it know the IP is on a new MAC? Can anybody explain the nitty-gritty? Thanks.

The onboard E1000G works fine, it's only when I added the X4151A card that I have this issue. I installed the card and a fresh install of Sol 10 01/06 I setup the vlan "80" as device ce80000 on device ce0 # ifconfig -a lo0: ...

What is a best pratice when it comes to "centralized software management" in a Solaris environment ? Today I have 1 file server which handles NIS/NFS and some other services. I have about 30 client workstations which serve as clients to the file server. Today I share common ...

Hello people, whilst logging onto an ordinary Windows XP Pro machine how can I log into the Solaris box?. I would like to give everyone the priviliges of remoting in from their Windows machine. and be able to get into the Solaris Gui or just Solaris Sorry for the silly question or if it is ...

If we paste a floating IP on some physical interface on a machine. How can we check if that floating IP is reachable? We have to carry the check from the same host where we had pasted the floating IP.

HI, Once I've changed the default route in /etc/defaultrouter, does the machine need a reboot to use the new settings? Thanks

I want to configure the following network: 1 unixserver (solaris 10) with DCHPserver connected to a dyn ip from ISP(versatel). This machine must work as a router 1 windows XP client capable for internet and email 1 Mac OSX 10.3 client capable for internet Solaris 10 is working. DHCP server ...

Hello Gurus! I'm currently trying to configure NAT using proxy ARP on a SunOS 5.8 . This box is running Check Point FW1 that sits behind my internet router. I have a server that is connected to the firewall box. I want to translate this server using proxy ARP. Settings: ...

I've installed Solaris 10 1/06 (x86) on a system running an intel mainboard model D865PERL. This has a built in ethernet controller ( Intel 82547EI gigabit lan controller) and the mainboard appears on the bigadmin hcl as being supported. The OS recognizes the built-in NIC as e1000g0 but during ...

Hello brothers and sisters, I would like to transfe data files from win xpp to solaris8. If anyone konw how to do it, please let me know. Cheers!

Which network cards are supported by Solaris 8 x86 ? Thank you ! dorin.

Hi, Im trying to figure out how to view my transmission settings for my network card, ex: 100baseTX (full/half duplex)...i dont have a mediaopt option for this card to view...any ideas? bge0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2 inet 10.140.1.12 netmask ...

Dear Friend, I am looking into constructing a Sun system with the maximum number of ethernet ports. Q1: is there a Solaris 8 specific maximum number of ethernet ports that it can support? Q2: i know you can get quad ethernet cards, but anyone know of cards that offer more than four per ...

We have a little trouble at the company: We recently acquired some Sun UltraSparc60 systems, but we can't seem to configure the onboard ethernet controller to receive an IP from a DHCP server - which is a Windows System. We need these connections for updates of Solaris. Which Solaris ...

Dear brothers and sisters, I have bought a ultra sparc2 machine last week . When I looked the back of the machine, it has two nic ports, one is tp port and the other is 100baseT port. When I connect these two ports to the router and then I configured IP number in each of ports. After type the ...

Hi gurus ... I followed all the steps mentioned in the Sun Blue Print publication to set up IPMP on my Sol 9 sparc box. Have 3 interfaces.. hme0, ge0 & ge1. Am trying to setup IPMP between ge0 & ge1. The following is the conf details... ash-2.05# ifconfig -a lo0: ...

hi everyone, how do i connect my ultrasparc machine (actually this machine is connected to adsl router with another windows machines) to intetrnet? The windows machines are easily connected to internet and seems everything looks like automatic. however, when i tried to ping any internet ...