Hi,is this the right forum for JASS discussions? If so, how can I give feedback to the developers?Thanks,Kevin

Hi,I want to install solaris 10 on a Sun Fire V40z, which is a amd server.Should I use the solaris 10 x86 CD's that I have got, or is there a separate installable for amd (amd64 / x86_64).Please suggest,Thanks & Regards

Hi guys,If I create a Flar out of the Entire+OEM distribution installed on a sun4u machine (Netra V210), will I be able to install it on a T1000/2000 machine? (sun4v) using a custom jumpstart+flar DVD?

hello all,i have a jumpstart server (ultra10, solaris 8) that works very well to install clients on the same network, 192.168.10.0.Now, i have to install machines on other network 192.168.20.0So, on jumpstart server, i added a new virtual interface and i have:mary2-root% ifconfig -ahme0: ...

Scenario: Two Sun Ultra 60s. Connecting to SmartStack via both hme0 and ge0. Ring is set up correctly, and I get yellow lights (i.e., thr red light foes out on the back of the card), but am unable to plumb either ge0 on either machine.ifconfig ge0 on both machines reports "no such device", and ...

I upgraded my Sun W2100z workstation to Solaris 10 6/06 from 1/06 in early July. I remember that the updater asked me if I wanted to enable IPv6 support, and I thought I said "yes", but I'm not certain.We're ready to begin testing IPv6 in our environment. I'm reading through the Sun Solaris ...

Dear All,I intend to install ghostview package to all the damin machines. The package is downloaded from sun free sofatware site and need to be isntalled with command: pkgadd. 'pkgadd' command installs software to /usr/local or /opt. How can it be installed into a shared common directory so ...

new install of v210 with 5.10 and I am trying to connect from winxp using exceed/rexec and get an error "unable to connect to host using the specified start emthode" . Exceed support indicated that I need to set up REXEC on the server side. I am a new admin so please provide as many details as ...

Dear All,I got the error message - fatal: libSM.so.6: version 'SUNW_1.1' not found while running application software. May I know what I should do to solve this?Any help is much appreciated.vlsi.

I've faced the problem during SUN web server 6.2 installation on SUSE SLES 9. When I start setup error message is shown:/tmp/sunwebinstall/./.setup: error while loading shared libraries: libtermcap.so.2: cannot open shared object file: No such file or directorytermcap is installed ok.# rpm -qa ...

Hi,Is anybody know how I can remove the pre-installed OS10 packate without a cdrom?

How to setup HP LaserJet 3015? (Solaris 10)

I've got a shiny Sun Ultra 20 M2 by my desk that I can't manage to connect to a network under a fresh install of Solaris 10 6/06 (I can connect it to a network under Windows XP Professional x64 Edition) using the built-in NIC.I've installed the nge drivers from the Sun Ultra 20 M2 ...

Hi Folks,I'm trying to create a bootable Solaris 9 CD for my PC, and am not able to. I'm using my PC running windows, with the "copy>burn image" function in Roxio easy CD creator. The name of the file is:sol-9-u8-ga-x86-v1.isoorsol-9-u8-install-ga-x86.isoWhat happens is that the first 70 M ...

Hello..I am Still Learing Solaris and this is on my desktopwhen i try to Install Solaris 8 from its CD...i pressed STOP + A and i get a OK prompt screen.I then typed, "boot cdrom" and i am getting this error message." FATAL: system is not bootable, boot command is disabled."How do we enable the ...

Dear All,I have a major problem while installing Solaris 10 on my IBM T43 Laptop. Here is my problem:- I boot from Solaris 10 DVD- I select the option "Solaris" from the grub menu- I get 6 installation options1. Solaris interactive(Default)2. Custom jumpstart3. Solaris interactive text(desktop ...

Hello Sun Team!After running sol-10-u2-ga-x86-dvd.exe having fun fron NOSS(R):The extraction failed for an unknown reason. Info ID: 6717.439.02.2.10025Hard&soft:IBM IntelliStation M Pro PIV-3000, WinXPSP2.yours Zile

I have a sf6900 connected to some EMC disks via some dual port HBAs. I need to be able to configure Alternate-Pathing(mpxio or dmp) and then test the fail-over works.Hope someone can help,Pat

To all Sun experts:I bought a Sun ultra on ebay which came without any OS installed on it. Here is the configuartion:Dual 450Mhz sparcII processors2 Gig of RAMDual 18 Gig SCSI harddrivesSCSI CDROMI am having problem in booting Ultra 60 from the CD. It gives me the the message saying: "The file ...

Hi,By mistakenly I executed "rem_drv sd" command and reboot the host, now the host is sitting at OK prompt.can anyone tell me how can I recover this host.Thanks,Mallik

Hello all:I just set up a Solaris 9 and 10 jumpstart server. I can jump sparc machines just fine. But when I attempt to jump a x86 machine I receive an error when executing the add_install_client command. My syntax for add_install_client is below../add_install_client -d -e 00093D146999 \ -c ...

Need some help with getting a HP DAT72 drive to hold more that 30G on my V210 Solaris 9 box. I'm using ufsdump with the 0cn device but still cannot get anywhere close to 72G before getting the "end of tape" error. I have tried loading the lastest patch (113277-49) then restarting with boot -r ...

I am trying to uninstall the Sun Java System Application Server Platform Edition 8.1 2005Q1 from a Linux box.I followed the instructions here: http://docs.sun.com/source/819-0080/uninstall.html- I logged in as root.- I made sure everything was stopped.- I executed the following commands:$ cd ...

Hello,How can I replace the unknown value after Sun(tm) Advanced Lights Out Manager 1.5.4 ?Copyright 2004 Sun Microsystems, Inc. All rights reserved.Use is subject to license terms. Sun(tm) Advanced Lights Out Manager 1.5.4 (unknown)Please login:Thanks for your help ...

Does anyone have experience of installing JDS3 on SPARC architectures? Most of the posts seem to relate to x86. I'm having trouble installing JDS3 from the Solaris 6/06 distribution.I have a jumpstart config which starts with a SUNWCrnet and adds the minimum to provide a CDE with XDM log in. ...

hi,when i boot the client jumpstart OK boot net - installTimeout waiting for ARP/RARP packetTimeout waiting for ARP/RARP packetTimeout waiting for ARP/RARP packetTimeout waiting for ARP/RARP packetRequestin internet address for "my ether address"boot: cannot open kernel/unixEnter filename ...

Hi, can any one help me in getting th practice questions for solaris10 certofication for free some where on the net !!! and also any suggested study guid apart from Exam Prep ..of course hands on practice on the servers with sol10 ..thnks,susesun

I'm trying to upgrade a V490 from Solaris 9 4/04 to Solaris 10 6/06. luupgrade is ending with "is partially complete". Support is suggesting that I just delete the upgrade_failed_pkgadds file and continue on, but this is my first Solaris upgrade and I'm concerned about breaking something down ...

I recently set up a new jumpstart configuration on a Solaris 9 server. I believe I've followed all the various instructions but cannot get the jumpstart to work for either Sol 9 or 10 CD's I've loaded.When I run the add_install_client for a Solaris 9 client, then do "boot net - install" it ...

Hello, Installing Solaris 7 Intel in a HP Compaq computer, can't configure graphics device for CDE to create a test-computer. The HP is provided Intel 82945G Express graphic device, 17-inc screen size and 1280x1024-60Hz.what kind of window system configuration need for Solaris 7 Intel ?Thanks ...

Hi Folks,trying to create filesystems on a couple of 72Gb scsi disks. partitioning of disks goes fine using 'format'. When I try and use newfs I get the error message ' ERROR DETERMINING ALTERNATE SUPERBLOCK LOCATIONS' Tried using fsck to allocate another superblock, but this spouts out a ...

how to do?

the external monitor shows only one resolution: 640x480 at 4-bit color ,how to do? hardware:sunblade 2500sofware: solaris 10sunpci card: v3.2.2 , windows sp2/windows 2003 sp1 installed.help me plz.

Hi,I have Solaris 10 running on T2000. I guess System Controller is not configured during the first run.The install document that I found describes the procedure to configure it duringthe first run which we have already missed. Is there any way we can do it now?Thanks for the ...

Hello experts. I've created my own package file using the procedure outlined in www.solarisfreeware.com. for those of un-aware of this procedure, it basically utilizes pkgproto, pkgtrans etc..... However, im now attempting to install this particular package un-interactively via Jumpstart but ...

Yesterday, I installed the Java Application Platform EE5 SDK bundle on my Windows XP laptop. The bundle includes the Java System Application Server PE9.After installation, I found out that the Application Server automatically starts-up at startup/login of my laptop. Where in the Windows XP ...

Hi, I woudl like to customize the default status of some of the services on solaris 10 ,like sendmail , ntp etc . II have a created a site.xml file with the below contents to test just with sendmail, but after rebooting, these settings are not effective. Though I specified sendmail to be ...

Hi:I recently installed a solaris 10 sparc. I selected the "Entire Solaris Software Group" option and everthing went fine. Now I realized that SUNWxcpu4 was not installed. I looked at the installation CD #2 and I could see SUNWxcpu4 directory including the pkgmap file.So my questions are:[1] ...

Solaris 10 (Sparc), Oracle 10.2.0.1 Clusterware cluvfy utilityBefore instaling Oracle CRS cluvfy utility checks system parameters. System has 30Gbytes Swap space, but Oracle CRS cluvfy utility find only 800Kb of swap and gives error message:"Swap space check failed".Does anybody found same ...

Hi, I am using jumpstart ( jass 4.2 ) to install Solaris 10 and observed that after the installation system forcing the password to be changed. This way it becomes interactive and solving my unattended installation purpose.I have added the finish script to assign the root password and log shows ...

HelloI just got a Sun Ultra 10 from a friend of mine ( it was free) And i am trying to load solaris on it.Since it takes IDE drives, i have tried many different IDE CD-ROM's and DVD-ROMs and i have had no luck. Everytime i try to install solaris (solaris 9 CD Download or Solaris 10 Cd download ...

I have - solaris 10 on server v240, HBA dual of Qlogic(qlc model).I can see one LUN within 2 deffrent path(2 regular device files).I enabled the stms(stmsboot -e) and now I can see only one device file(stms device file).3 questions:--How can I check the stms(to see that stms working ok)?How can ...

Hello;I have Solaris 8 on my hard disk. I was trying to create a news partition table. When I try to modify my current partition table. It would say " Can not modify disk partition while it has mounted partitions." I would like to know how to create, name and label a new partition without ...

I have a Solaris 8 install that I can't get to work. I have a Sollaris 8 flash archive that I made from a fully patched Solaris 8 server. Hardware is 280R with 4 GB RAM. I go through the normal install steps. After the networking, I'm prompted for what kind of install. I select the flash ...

I have a Netra 240 with Sol 10; kernel patch 118558-38. The system is connected to a fabric and has Symmetric disks already assigned and in use. We are using native Sol 10 drivers, cards are sun branded Emulex. I added another disk from the Sym yesterday. The new disk does not show up in ...

Hey,I would like to know where I can find some good documentation for installing a Sun LDAP server on Solaris 10. Can anybody point me in the right direction ?Ideally this directory server would sync it's info with the existing Windows 2003 AD server, any ideas on how to go about this ?Many ...

hellohow can I install zfs on solaris 10 update 3/05?

Hi all- Just got a new sun server and need some help. The OS is pre-configured with the following: Filesystem sizeused avail capacity Mounted on/dev/dsk/c0t0d0s011G4.6G5.9G45%//devices0K0K0K0%/devicesctfs 0K0K0K0%/system/contractproc ...

I decided to experiment with Solaris & got myself a copy of Solaris 10.My machine has a single disk with 3 partitions & WinXP SP2 is installed on the first partition, C:While installing Solaris, I noticed that the installation with erase the entire disk & create Solaris partitions. ...

Hi all,I'm trying to install TermReadKey-2.30 module under Solaris10,and look what I have:cp ReadKey.pm blib/lib/Term/ReadKey.pmAutoSplitting blib/lib/Term/ReadKey.pm (blib/lib/auto/Term/ReadKey)/usr/bin/perl -I/usr/perl5/5.8.4/lib genchars.plWriting termio/termios section of cchars.h... ...