Installed a Solaris 9 recommended patch cluster to a box acting as a DHCP server to a number of sunrays. (The patch cluster was downloaded on 7/16/07). After install and reboot dhcp would no longer start. When the dhcp startup script runs I get a "bus error" and it core dumps. Removed the one new ...

I installed JDK 1.6.0_u2 on my Ubuntu Feisty 7.04 system using the self-extracting binary. I then proceeded to create symlinks in /usr/bin. After doing this, 'java -version' returns:Java version "1.6.0"Java(TM) SE Runtime Environment (build 1.6.0-b105)Java HotSpot(TM) Client VM (build 1.6.0-b105, ...

<p>hello everybofy </p><p>i want to install srss_3.1 on fedora so, was downlaoding srss_3.1 for linux and i made the ./utinstall but now the problem is that i can't make the ./utadm and ./utconfig </p><p>so any ideas ?</p><p>10x</p>

HelloI have an ultra 10 that I can connect to using HyperTerminal using a null modem cable and a db9 to db25 connector, this works well.However when I use the same HyperTerminal settings and cable to connect to an e450 serial A. I dont get any output. There are no warning lights and the e450 sounds ...

<p>Hello,</p><p>I want to install Solaris 10 with a server JumpStart.</p><p>But i want only actived the ssh mod (for security).</p><p>How do you write that in the jumpstart script ?</p><p>What is the command line ?</p><p>Anybody can help me, please ?</p><p>Thank you :)</p>

My question is whether or not to mirror swap space.I have a V240 with an SE3310 JBOD attached, running Solaris 10.My predecessor set up RAID 1+0 on all partitions except swap.I presume not mirroring swap was decided for performance reasons.We currently have complete failover coverage (mirror + ...

Hello,I'm trying to setup a demo box to evaluate Sun Com Suite. I'm following the "Deployment Example Sun Java Communications Suite 5 on a Single Host." Everything has worked fine up till I tried to start the Calendar. I'm not sure where I should look for the problem.This is the out put from ...

I finally got around to installing my Solaris 10 11/06 DVD. Installation went fine, nothing went wrong to my knowledge. Then, when I booted for the first time, I selected the default choice at the boot screen. Then it gave me some song and dance about a database integrity check and gave me a ...

Dear All,We have 6320 Sun storedge Array,this is working online with other servers.i m trying to install San In new servers 1. created new LUN / VG / Intiators/ Initator Groups in online working 6320 Storage array.2.6320 has SAN FC Switch - already Zone sets are avaialbe in FC switch. we ...

Hi All,we have already got sun one directory server installed.where do I get the installation file for setting up Sun one directory server console on my workstation.The version needed is 5.2

Hi,I'm a new Solaris sysadmin and I have a solaris 9 system with 4 drives. The first 2 drives are mirrored and don't have any more space left on them. I other 2 drives are unformatted/untouched.Can I set up another mirrored set with the 2 unused drives so I can get some more room? Do I need ...

Before I give up altogether on this edition, can anyone give me a bit of guidance regarding:1) 5/07 Developer has been changed so DHCP is the default for network IP address assignment. Before, I could use static addressing and it stuck. Now, when I use the applet to set static address it goes ...

Hi allI am trying to restore the root and var file system which have been backed-up on one server and restore is on another server:1. I took /,/var ufsdump on server 12. I booted from cdrom -s on server 23. I used ftp to get the ufdump from server 14. I ran format on server 2 and created /,/var ...

Hi there,I'd like to install a new locale - en_GB.UTF-8.Does anyone know which package this would be in? I've lookedfor some time, and I can't see anything on how to add extra localesto Solaris 9.Thanks in advance.Paul S

Hi,+ installation of the latest SolarisExpress for sparc is extremey slow.+ Installation server has Solaris 8 (E450) and the target machine is a Netra X1.+ The first 881.93 MBytes have been installed over the period of about three to four hours.+ The installation is now "stuck" at "Installing: ...

HelloI am trying to know the update level of my Solaris 5.8I am using this command : uanme -aroot@ws3[/]#uname -aSunOS ws3 5.8 Generic_117350-38 sun4u sparc SUNW,Sun-Blade-100That what the sunsolve web site shows mePatch Id: ...

I am planning to install Sun Studio 11 on the Production Server.I have already installed Sun Studio11 on my Development machine.The Kernel Version on development machine is "SunOS 5.9 Generic 112233-08 Jun 2003" where as on Production Server it is "SunOS 5.9 Generic 112233-04 November 2002".I ...

Hi all,i have sun station with sun 9 os, the staton does not has vga card, and i want to access the sun os from windows client using GUI or open win.what is the configuration i have to do and what ia applcation i have to use in the windows to get access to the sun ...

I got the following error message at the time of starting the s1ds server and config: (using a script to install, start and config the s1ds server)[slapd-abcd]: starting up server ...[slapd-abcd]: [04/Jun/2007:11:54:15 +051800] - ERROR<4167> - Startup -conn=-1 op=-1 msgId=-1 - System ...

hi,im new to solarisi have downloaded 5 iso files and recorded on cd.actuall already solaris 8 is existing now what should do i doto upgrade it to solaris 10.thanks

Hi,How many Installation CD to install solaris 8 ?When I boot up the first cd, it asked for the second cd....Total number of cd = (boot cd x 1pc ) + (installation cd x 2pcs) ?= 3 pcs of cd ?Is this correct ?Thanks in advanceBest ...

Hello,I'm following the document "X64 Servers Utilities Reference Manual" whichdescribes how to obtain and install the MSM-IR Utility for the integrated MegaRAID controller on Linux.According to the document, the software should be on a "Tools and Drivers"CD. I have downloaded all the software ...

Here's the setup: I'm runnig Solaris 10 11/06 x86 under VMware WS 6.0, with / and /var on ufs filesystems under c0d0s0 and c0d0s3 respectively. A zpool 'blackpool' has been created on 3 additional disks, c2t[0-2]d0 and works fine under Solaris 10.I've added another disk, c0d1, installed ...

Hi all,I need to have Install server on SunFire V125 and have it as a source of network installation for other systems on the same network as they do not have CD/DVD drives. I created an Install server image from downloaded DVD disk launched "setup_install_server" configured the client ...

Hi,New to Solaris 10. Can you direct me about the download and installation procedure for NTP on Solaris 10 Sparc.Thanks in advance !Tx,S

HiI have a new T2000 server with Solaris 10 on it. I want to run Dynamo/Java and Apache on it. The Apache I have installed is apache_1.3.37.tar. When I do a ./configure I get :cd ..; gcc -DSOLARIS2=2100 -DUSE_HSREGEX -DUSE_EXPAT -I./lib/expat-lite -DNO_DL_NEEDED `./apaci`-o helpers/dummy ...

I used LiveUpgrade (lucreate \ luupgrade\luactivate) in order to upgrade from solaris 10(3.05+resent recommanded pathed) to solaris 10(11.06).the upgrade finished succesfully, but then I check zfs commands like : zpool, zfs the upgrade installed only the simbolik links /use/sbin/zpool but not ...

Hi all,I'm trying to install TermReadKey-2.30 module under Solaris10,and look what I have:cp ReadKey.pm blib/lib/Term/ReadKey.pmAutoSplitting blib/lib/Term/ReadKey.pm (blib/lib/auto/Term/ReadKey)/usr/bin/perl -I/usr/perl5/5.8.4/lib genchars.plWriting termio/termios section of cchars.h... ...

I decided to experiment with Solaris & got myself a copy of Solaris 10.My machine has a single disk with 3 partitions & WinXP SP2 is installed on the first partition, C:While installing Solaris, I noticed that the installation with erase the entire disk & create Solaris partitions. ...

Hi all- Just got a new sun server and need some help. The OS is pre-configured with the following: Filesystem sizeused avail capacity Mounted on/dev/dsk/c0t0d0s011G4.6G5.9G45%//devices0K0K0K0%/devicesctfs 0K0K0K0%/system/contractproc ...

hellohow can I install zfs on solaris 10 update 3/05?

Hey,I would like to know where I can find some good documentation for installing a Sun LDAP server on Solaris 10. Can anybody point me in the right direction ?Ideally this directory server would sync it's info with the existing Windows 2003 AD server, any ideas on how to go about this ?Many ...

I have a Netra 240 with Sol 10; kernel patch 118558-38. The system is connected to a fabric and has Symmetric disks already assigned and in use. We are using native Sol 10 drivers, cards are sun branded Emulex. I added another disk from the Sym yesterday. The new disk does not show up in ...

I have a Solaris 8 install that I can't get to work. I have a Sollaris 8 flash archive that I made from a fully patched Solaris 8 server. Hardware is 280R with 4 GB RAM. I go through the normal install steps. After the networking, I'm prompted for what kind of install. I select the flash ...

Hello;I have Solaris 8 on my hard disk. I was trying to create a news partition table. When I try to modify my current partition table. It would say " Can not modify disk partition while it has mounted partitions." I would like to know how to create, name and label a new partition without ...

I have - solaris 10 on server v240, HBA dual of Qlogic(qlc model).I can see one LUN within 2 deffrent path(2 regular device files).I enabled the stms(stmsboot -e) and now I can see only one device file(stms device file).3 questions:--How can I check the stms(to see that stms working ok)?How can ...

HelloI just got a Sun Ultra 10 from a friend of mine ( it was free) And i am trying to load solaris on it.Since it takes IDE drives, i have tried many different IDE CD-ROM's and DVD-ROMs and i have had no luck. Everytime i try to install solaris (solaris 9 CD Download or Solaris 10 Cd download ...

Hi, I am using jumpstart ( jass 4.2 ) to install Solaris 10 and observed that after the installation system forcing the password to be changed. This way it becomes interactive and solving my unattended installation purpose.I have added the finish script to assign the root password and log shows ...

Solaris 10 (Sparc), Oracle 10.2.0.1 Clusterware cluvfy utilityBefore instaling Oracle CRS cluvfy utility checks system parameters. System has 30Gbytes Swap space, but Oracle CRS cluvfy utility find only 800Kb of swap and gives error message:"Swap space check failed".Does anybody found same ...

Hi:I recently installed a solaris 10 sparc. I selected the "Entire Solaris Software Group" option and everthing went fine. Now I realized that SUNWxcpu4 was not installed. I looked at the installation CD #2 and I could see SUNWxcpu4 directory including the pkgmap file.So my questions are:[1] ...

Hi, I woudl like to customize the default status of some of the services on solaris 10 ,like sendmail , ntp etc . II have a created a site.xml file with the below contents to test just with sendmail, but after rebooting, these settings are not effective. Though I specified sendmail to be ...

Yesterday, I installed the Java Application Platform EE5 SDK bundle on my Windows XP laptop. The bundle includes the Java System Application Server PE9.After installation, I found out that the Application Server automatically starts-up at startup/login of my laptop. Where in the Windows XP ...

Hello experts. I've created my own package file using the procedure outlined in www.solarisfreeware.com. for those of un-aware of this procedure, it basically utilizes pkgproto, pkgtrans etc..... However, im now attempting to install this particular package un-interactively via Jumpstart but ...

Hi,I have Solaris 10 running on T2000. I guess System Controller is not configured during the first run.The install document that I found describes the procedure to configure it duringthe first run which we have already missed. Is there any way we can do it now?Thanks for the ...

the external monitor shows only one resolution: 640x480 at 4-bit color ,how to do? hardware:sunblade 2500sofware: solaris 10sunpci card: v3.2.2 , windows sp2/windows 2003 sp1 installed.help me plz.

how to do?

Hi Folks,trying to create filesystems on a couple of 72Gb scsi disks. partitioning of disks goes fine using 'format'. When I try and use newfs I get the error message ' ERROR DETERMINING ALTERNATE SUPERBLOCK LOCATIONS' Tried using fsck to allocate another superblock, but this spouts out a ...

Hello, Installing Solaris 7 Intel in a HP Compaq computer, can't configure graphics device for CDE to create a test-computer. The HP is provided Intel 82945G Express graphic device, 17-inc screen size and 1280x1024-60Hz.what kind of window system configuration need for Solaris 7 Intel ?Thanks ...

I recently set up a new jumpstart configuration on a Solaris 9 server. I believe I've followed all the various instructions but cannot get the jumpstart to work for either Sol 9 or 10 CD's I've loaded.When I run the add_install_client for a Solaris 9 client, then do "boot net - install" it ...

I'm trying to upgrade a V490 from Solaris 9 4/04 to Solaris 10 6/06. luupgrade is ending with "is partially complete". Support is suggesting that I just delete the upgrade_failed_pkgadds file and continue on, but this is my first Solaris upgrade and I'm concerned about breaking something down ...