hi we have 3 v100 machine which have solaris 9 opearating System .Each machine have 2 NIC one For LAN and Second For(WAN) boardband connection . how to configured IP address and subnetmask and default gateway and how to save this configuration bcoz i am setting these thing but when system ...

Hello all. I am very new to Sun world. I have a brand new V880 in the box. It has come preinstalled with Solaris 8. It does not have a graphics card. I have to check the MAC address for the ethernet card. Can someone advise me how can I login without knowing the root password and how can I see ...

HI, I have to enable ssh on a solaris, so I have to edit a script with which I will start the daemon ssh. This /etc/init.d/sshd script, I am trying to edit it : vi sshd then I press i for inserting - it does not work then i press :q! or :w for exiting and saving - it does not work Can ...

I have a V100 machine .which have solaris 9 due to power failure server had poweroff and when server is booting again which have some proble in bootmode server has boot from network and erorr given. i belive server has boot from network but i need system boot from hdd .I change the boot divice ...

Hi I dont know what try next so please help. I have 2 LAN's one with adresses 192.168.0.* a second 192.168.1.* and I have two routers the first one has IP 192.168.1.1 and second is 192.168.0.1. The second one is connected to internet.And I want to browse internet from computers with IP ...

Hello I am new to Solaris and having problems with a PC network configuration--wired to a belkin wireless router and then to a cable modem. I have tried many of the manual setups listed on the forums with no success--the defaults keep returning and I get an unable to plumb message (I don't ...

Hi everybody, how can i configure NTPclient on a cluster ? the Cluster private hostname have the same time,'cos file ntp.conf.cluster is configured; command ntpq -p print out clusternode1-pr and clusternode2-pr, the demon xntpd run like /usr/lib/inet/xntpd -c /etc/inet/ntp.conf.cluster Now ...

I have tried numerous times to install solaris 10 x86 with no ability to connect to the internet. What am I doing wrong? I have a belkin wireless router connected to a cable modem. I have tried two different NIC cards and a wireless card--nothing works. It continues to tell me that I have an ...

Hi, I want to change an IP and netmask and broadcast of a machine using solaris 8 but after I reboot the changes are lost. The IP is remembered but the netmask and broadcast are lost. In /etc/netmasks the last line has the new netmask that I established, all the lines before this line are ...

I just installed Solaris 10 on my computer today. I am unable to browse the internet and I have no idea whatsoever how to configure my network settings. I searched everywhere on the internet and could find nothing relevant. I have an ethernet Netgear router installed. Could anyone give me a ...

"modinfo |grep Eth" can get the eri0 module info, "demsg |grep eri0" can get the eri0 info. but I use "ifconfig eri0 plumb" there is an error, said" eri0: no such file or directory", use "ifconfig eri0 xxx.xxx.xxx.xxx ......." still get that ...

Can any one explain me the full steps to change ip address in solaris 2.5,7 & solaris8 on sparc & x86 platform? any differences are in commands in all versions? if yes explain me

Hi all, I'm having the following problem. The server is a Sunfire V240, I've just installed a 4-port Quad card in the 3.3 Volt PCI slot, and I'm only configuring qfe0 and qfe2 since they are the interfaces to be used for network traffic. The problem is that the system complains about qfe1 ...

Please, can somebody give me the way, step by step to configure a DNS server on solaris 10. i want to have the directories and files that it is necessary to modify and the modification to have a domain name "deptech.lan" with ip adress of the DNS server 192.168.100.2. thank ...

I shall be very grateful if any one would offer his/her advice of the followings: 1) How do I copy a img file, i.e bcmedu.img which file size is 1.47MB to a 1.44 diskette when the PC is unable to connect to network? 2) Where can I get a copy of the driver for bcme.bef to be install in DELL ...

Is it possible to team two network adapters for fault tolerance on Solaris 8 in a Sun v440 or v880 box? If so, how?

I installed solaris 9 on my desktop for which the NIC is not installed yet. I m still not able to download NIC driver Intel(R) PRO/100 VE can any tell me where should i get it from. Thanks in advance ...

I want to measure the whole internet traffic comming in or out of my eri/hme etc. in kb/s|mb/s. As I don't want to install any tools like net-snmp, mrtg, or other net traffic counter, I'm wondering if there is a basic unix command. I appreciate any help Cheers, Martin ...

I just added a nic which is working fine in different sun box to Ultra60 (solaris10). However I can't seem to plumb the nic and the box doesn't recognize the nic. I googled for an answer but no success so far. could any of you help me what's wrong here? bash-3.00# ifconfig -a lo0: ...

Im a newbie in v20z server (Solaris 10 OS) how to setup network configurations?.. Is there an article on doing this?

Hello I am running solaris 8 on a multihomed sever. the interfaces of which have been configured with multipath failover and assigned arbitrary functional types management user traffic provisioning etc.. SNMP traps are correctly emanating from the "management" interface... but ...

I've read several posts here with other people having trouble getting the network to work properly under Solaris 9. I've tested all the solutions, but I'm still no closer. My set up is pretty standard for home broadband. I have a router, provided by the ISP. Internal IP is 10.0.0.1, I have ...

Hello Ladies, This is Sol 10 on x86, Mavel Yukon GigaBit. On Linux it goes like this: pppoeconfig, klick on "next" a few times, it finds an "accessConcentrator" (wtf ever this is), type in your dsl username and password, ask, if u want to be connected by boot up, and there ...

Hi All I've installled Solaris 8 on a Sun Fire v480. Now, when I boot I get the following (via serial A/LOM): {2} ok boot -r Boot device: /<a href="mailto:pci&#64;9" target="_blank">pci@9</a>,600000/SUNW,<a href="mailto:qlc&#64;2" ...

I am sooo confused. Got an Ultra with Solaris 9 on it. Hooked it up to router in my home office, configured DNS, worked great. Trying to load some software, got apache (via blastwave) it was loaded and configured. It runs, but my system cannot see any systems on my network. It is ...

Hello all! My first post is a question. I hope this is not a bad sign :P First, the scenario: I have a local area network, an ISP and a Solaris 10 x86 box with two Intel PRO/100+ Management Adapter NICs. The ISP has provided me with multiple public IP addresses. The question is: how can i ...

Hello, I have installed sol10 on x86 box. I ping the router, I can ping to and from other pc. From the other pc running windows i can connet to the internet. but not from solaris!! I had the same configuration using linux and windows and I had no problem. Thanks in advance for any help ...

Hello Experts, New yr wishes to all. I'm new to this support. i would like to post my first question . we have got a E450 server , today we have placed the JINIC cards and we also added the pkgs . my question is how can i confure/ edit the file jfca.conf file . and wat information do i ...

Serial connection established. Using interface sppp0 Connect: sppp0 <--> /dev/ttyb We rejected the peer's demand for 0xc023 (Password Authentication Protocol) Connection terminated. Here is the copy of chat file. ABORT BUSY ABORT 'NO CARRIER' REPORT CONNECT TIMEOUT 10 ...

Hi, there. First off, I'm gonna inform you of my PC. I purchased SC420 by DELL and installed Solaris 10 onto it. Then I downloaded and installed the driver from the website of Broadcom onto Solaris10 by the burnt CD-R because it didn't recognize the NIC. After that, Solaris10 recognized and ...

dear Sungurus, I have recieved an error from my nis server. i dont have any idea about snmpdx . please anyone help me out that what is the importance of this message and what is the work around. this is the message i got: ' Jan 23 05:33:36 cornice /usr/lib/snmp/snmpdx: [ID 268089 ...

During snooping the local ip address on a V240. I saw this error: WARNING: received signal 11 from packet 780 What does it mean? Is the hardware faulty? Is snoop faulty? The packet 780 was going outward and has xxxx in place of some data: ETHER: -- Ether Header -- ETHER: ETHER: Packet ...

Hi Can any please help me. I am trying to connect to a Sun Solaris 2.5 (Sun Sparc 5) via OSX.3.9. Could someone please tell me how to do it or point to a step by step process? I need to copy some stuff from it and our old method doesn't work any more. Thanks ...

I have solaris 10 running on sunfire v250. For the configuration of the server on my local network, i have used the command sys-unconfig. At reboot, the lines select a language 0 English 1 German 2 fr please make a choice (0-2), ...: appear But the keyboard no response. Ii can't enter any ...

Sorry for my bad english. Server - two SunFire 480r, OS - Solaris 8 Generic_117350-27 sun4u sparc SUNW,Sun-Fire-480R two Cassini 10/100/1000 Mbit interface. I want to connect theese two servers via cross-over cable. I make a cable with these pinout <a ...

i wonder if Solaris 10 would work with DLink Wireless Adapter DWL-510. any sugestions? it's important!! Please help.. thank you

I have file transfers that take 10 hours using rcp. (Huge amounts of data) I want to use SCP but a 1 GB file takes 4mins with a max transfer rate of 4.5 Mb.RCP only take 1.5 mins. (SFTP take only a few second less that SCP) I have a Sun E10k with 100Mb cards locked at 100/full. Does anyone ...

<div align="left">Can anyone tell me what this means? le0: TINT but buffer owned by LANCE</div>

Hi all, I'm a newbie to this forum... if the question had been asked before or this is not the right place for it, please refer me to the correct location. We've a few SunFire v200 Servers, I've configured and connected both network interface. dmfe0 goes to our main production network ...

sunsparc.localhost svc.startd[7]: [ID 652011 daemon.warning] svc :/network/rpc/nisplus:default: Method "/lib/svc/method/nisplus" failed with exit status 96. - bash-3.00# cat network-rpc-nisplus:default.log [ feb 11 12:33:35 Disabled. ] [ feb 11 12:33:37 ...

Solaris 10 with nforce 2, installed nfo-0_8_1. This very post is written under my new Solaris 10 install. My problem: every time i reboot, i loose my configuration for nfo0. my hostname: acasa my static ip: 10.10.10.13 my netmask: 255.255.255.0 my gateway: 10.10.10.1 my dns: 10.10.10.1 ...

I have a V880 with a onboard fiber adapter, an onboard ethernet adapter, and a pci card with 4 additional ethernet adapters. I currently use the onboard ethernet adapter (eri0) to acess the network. Is there a command to list all available network adapters? i tried using ifconfig -a to list ...

Sun Engineer, Hello, the sendmail bundled with Solaris 10 experimental (Sun Microsystems Inc. SunOS 5.10 s10_69 December 2004) can send mails to local unix accounts, but can not send mail to external addresses outside the unix machine, even can not send to LAN users on my machine. This ...

we have sun V100 machine which have Two NIC one is configure but second is not configured I get commond ifconfig dmfe0 result is ifconfig dmfe0 dmfe0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2 inet 131.107.1.101 netmask ffff0000 broadcast 131.107.255.255 ...

Hello, I have two intel machines at my home. One is running Solaris 10 and other one Windows Xp. Now i want to create a simple LAN ,share internet and files among these two systems. i have joined both machines together and they are connected to each other (confirmed by ping command). Please ...

I know nothing about Solaris and little about networking, so any help would be much appreciated. I have a Solaris box that part of our network is able to communicate with. It is running a program that must point to the IP address to access its database. We have 3 IP configurations on this ...

Hello. I've just spent the last few hours trying to get my head around how to set my Blade1000, running Solaris10, up as a DNS server for my predominantly Windows network. On the network we have a number of PCs (all XP based), four SGIs running IRIX 6.5, the Blade1000 running Solaris10 and ...

Hey folks, In an IPMP config, what happens on a low-level when the IP's failover? Is a gratuitous arp sent to the switch to let it know the IP is on a new MAC? Can anybody explain the nitty-gritty? Thanks.

The onboard E1000G works fine, it's only when I added the X4151A card that I have this issue. I installed the card and a fresh install of Sol 10 01/06 I setup the vlan "80" as device ce80000 on device ce0 # ifconfig -a lo0: ...

What is a best pratice when it comes to "centralized software management" in a Solaris environment ? Today I have 1 file server which handles NIS/NFS and some other services. I have about 30 client workstations which serve as clients to the file server. Today I share common ...