Hello All,I want to make a static relaying to a remote MTA using imta.cnf, I want to set a rule to route all mails sent to a specific domain to a certain host x.y.z.k .can someone helps me on this task.Regards,Samir.

Hello all,we got strange problem with enabled hotbackup and archive mode with calendar database. (JES 4 2005Q4 with all available patches, 116577-42)Store daemon exited wit -1 if one of above activated.Checked Database - ok, 'make' new database with rebuilt - same condition.Both prozesses are ...

iMS Version: 6.1I have a need to restrict all senders of email to 10 recipients in a single email message. However, one specific host needs to be able to send to an unlimited (or just a large number) number of recipients on a single message.From some reading, this isn't all that easy to set ...

iPlanet Messaging Server 5.2 Patch 2 (built Jul 14 2004)libimta.so 5.2 Patch 2 (built 19:30:12, Jul 14 2004)SunOS apollo1 5.9 Generic_118558-39 sun4u sparc SUNW,Sun-Fire-V440As indicated by the subject line, one of the mta ims_master process suddenly died (and quite magically too, as it seems). ...

Hi, my environment is solaris 2.8 with sunone msg server 5.2 and directory server 5.1. The system is configured on front end (accessible by internet) with 2 mta and 2 directory server (slave), on back end 2 message store and 2 directory server (master). I've installed an external ...

Now that Sun has stripped out the email services from JES 5 and thrown them into another product, must I now pay to USE Sun Java Communication Suite or is the "licensing" strictly for support?I must be a blithering idiot because for the life of me I cannot find the issue documented CLEARLY ...

Folks,I have a question regarding user provisioning via DA within the JES 5 Comm suite. I might be missing something obvious but when a mail enabled group is setup within DA and toggled to allow users to "join" where (in what method/interface) do users subscribe ? Logically there should be a ...

Hi,My customer would like to audit all email coming and going out from the MTA by user. For example the customer would ask,- I have lost email. Can you check and recover all emails from XXX at YYY date?- I have sent emails at YYY date but the recipient never receive the email. Can you check the ...

Hello Every OneI am using Sun Java(tm) System Messaging Server 6.2-6.01 (built Apr 3 2006)libimta.so 6.2-6.01 (built 11:20:35, Apr 3 2006)SunOS hostname 5.9 Generic_118558-28 sun4u sparc SUNW,Sun-Fire-V490We have customized webmail appearance as well as charateristic as per our requirement. Now ...

Can anyone help to explain why the mail transit (enqueue to dequeue) takes so long to complete according to imslog.pl?Is this a network issue or a MTA issue? Message delays (time from enqueue to dequeue):Channel<2 sec <10 sec <1 min <5 mins <1 hour >1 hourMax -- - - - - - - - ...

before my message server send the mail to mail gateway( 10.10.10.133) and then send it out ,now i want to direct send the mail out by mail server ,how to do it .in the imta.cnf have such line ,how to modify it ,thanks for you !tcp_local smtp mx daemon 10.10.10.133 remotehost inner ...

Just recently when I try to access my mail using either the Communications Express web interface, or via a mail client such as Thunderbird, when I try to operate on messages in any of my folders I get a message that "Mailbox does not exist".I'm still receiving E-mail, if I run a hashdir, the ...

Hi,Does Messaging Server offer any type of redundancy and load balancing between MTAs?I have two MTAs on the DMZ each connected to a different leased line. I would like the MTA in the internal network to deliver external mails to each MTAs with equal load. Should one of the leased line is down, ...

Hi,I have been reading section 2.5 of the Administration Guide. The options to migrate user mailboxes are as follow:1. To Migrate User Mailboxes from One Messaging Server to Another While Online2. To Move Mailboxes Using an IMAP client3. To Move Mailboxes Using the moveuser Command4. To Move ...

I was under the impression that the new release of the Calendar system and Outlook Connector (Sun JES Comm Suite 5) was going to work with Windows Vista and Outlook 2007.The release notes do not indicate that it does, but I tried it anyway on a Vista PC running OL2007. Not surprisingly, it did ...

Hi,Can anyone share with me a solution that uses the SNMP capabilities of the MTA? Does anyone has Cacti setup for monitoring the MTA?Thank you.

I using IM 7.1. I have set in Access Manager to not allow file transfer. The issue that I am having is that when a user right clicks the client the option for "attach file" pops up. Is there a way to get rid of this? I have been searching through the .jar files but I have had no luck.

the jnlp file sent by the im host has the internal host name - how do you tell it to use the exposed host name?in my case the internal name is portal - so what was what i got in the jnlp file:<?xml version="1.0" encoding="utf-8"?> <!-- Copyright 2004 Sun Microsystems, Inc. All rights ...

Hello,I have a host running jes3 versions of msg/cal/uwc/da/am. Access manager was used for SSO. It is my understanding AM is no longer required for SSO (it's still required or DA). Upgrade procedure for Comms Express mentions AM url as one of the parameters required by patch-config. I'm ...

Hi there,I am in the process of migrating a qmail system across onto messaging server and have to duplicate some old scripts that perform various (vital) functions.A couple of these require that I generate and then send messages from a bash script. Before I just did this:cat $TMPMAIL | ...

Sun Java(tm) System Messaging Server 6.2-3.04 (built Jul 15 2005)libimta.so 6.2-3.04 (built 01:43:03, Jul 15 2005)SunOS server 5.10 Generic_118833-36 sun4u sparc SUNW,Sun-Fire-V490Hi AllI磎 trying to work with outlook connector version 7.1.222.4. I have configured Messaging Server, Calendar ...

I would like to find a way to expedite the delivery of bulk emergency email messages.It currently takes more than 2 hours to deliver email to all 58,000 accounts on our campus.Is there a way to send a bulk email that gives priority for it's placement in user inboxs?Can we make the server just ...

Hi.I'm installing the UWC patch 118540-42,1.- i installed the patch2.- i ran the command /opt/SUNWuwc/sbin/patch-config -d /var/opt/SUNWuwc /opt/SUNWuwc/install/patch/118540-42but when i run /opt/SUNWuwc/sbin/install-newconfig -d /var/opt/SUNWuwc /opt/SUNWuwc/install/patch/118540-42i get the ...

Hello,I am using the messaging server from JES 2005Q1 and the MTA's patch installed: 118540-42.I have a mail server that acts and a secondary MX for a domain. Users are not local to my server. For this purpose, I use the mailRoutingSmartHost attribute in the LDAP.The mailRoutingSmartHost ...

I'm using IS with comm ex and some customers are complaining that IE isn't remembering the username and password. Firefox just remembers the username. Just wondering if anyone knows why and if there is something I can do about it.imsimta version:Sun Java(tm) System Messaging Server 6.2-3.04 ...

Hi,My Mailbox got corrupted when tried to do the following:I Created one subscriber mailbox under some domain. Deposited some messages in the mailbox. Tried deleting messages one-by-one from Message-Store end-user GUI. When all the messages are deleted, the mailbox gets corrupted. That is when ...

How can I integrate Sophos Puremessage in Messaging Server?I know this can be done by the JSMS connector. What's this? Where can I get this? How to configure this?Has anyone experience in integrating Sophos PureMessage?I'm using version 5.2p2Thanks ...

Hi:I'm hoping this is a known problem and fixed in a later release (we're running 6.2-3.04 (built Jul 15 2005)).imquotacheck -e -n sees my 15GB quota as 0:Hello jwasil02,Your quota: 0 (kb) Your current mailbox usage: 4077653 (kb)Your mailbox is now full. The folders consuming the most space ...

Hello,Here is our version (In process of upgrading to 6.2):iPlanet Messaging Server 5.2 HotFix 1.16 (built May 14 2003)libimta.so 5.2 HotFix 1.16 (built 12:32:17, May 14 2003)What we are starting to see in our mail.log_current is users sending e-mail that is not generated from our domain. A ...

Hi all,I have a quite canonical platform with a frontend mta and a backend message store. In the FE layer is also installed an antispam software (Sophos Puremessage), which is an SMTP server itself, integrated with iMS via the channel "daemon" keywork.That is, all inbound mail goes to the ...

We have: msg 6.2-8.04 (118207-63)We want msg 6.3-anythingThe Commsuite5 docs imply that the Msg Upgrade from JES2005Q4 should be done via patches. What are the patches and are they available yet? I haven't had any luck downloading or finding anything in the Patches Area. If I need to go thru ...

Hi All,I want to delete the mails for certain user..What reconstruct commands should i perform after deleting and should i also delete that store.idxThanks,Scotty

hi,Could anyone please tell me what are all the kernal patches needed to install JES4 on solaris 10, for both x86 and sparc. Previously there was a bug in solaris 10 that caused the Messaging server dispatcher to hang. What is the latest patch that resolves this bug?Thanks!

Hello,I am using the JES 05Q4.I configured a front end and a backend server as per Ch.6 in the Calendar server Admin Guide.The calendar server is working properly on the backend. I installed and configured the calendar server on the frontend. At first it was working well. But after I edited the ...

hi!i have two domains and want to share calendars between them. is it possible?where can i find further info?regards

On msg 5.2 when a message distined to non-existant email address, it does not bounce or reply standard error code. is it possible and where to fix/look it.

Hi All,I have the following set:All the mails are captured by server1I need to set the following:emails coming from abc.com be routed to server2can anyone pass me the channel definition to set this.Thanks

Hi,1.I want to create a group id so that I can send a mail to all the users of my domain abc.2.I want to restrict the access of this group id to only one user say ops@abc.comHelp is required.TIA Nawaz

Hi all,i need to set a message size limit that applies to both incoming and outgoing mail. I see there is an user-attribute I can set on LDAP, mailmsgmaxblocks, but the reference guide says that it is: "The size in units of MTA blocks of the largest message that can be sent to this user". I ...

hi!is there a way to automatize the upgrading of outlook connector?i have lot of machines deployed and i would find a way to upgrade unatended.regards,abosch

Hi All,I am using SJMS on Solaris9 sparc platform.My question is how to disable mail log rotation through SJMS.If I comment the line IMTA_SECONDARY_LOG=/my/path/of/log/file.yesterday in imta_tailor file & restart the messaging service, will it be helpful or I have to do something more with ...

Hi there,We have a pretty big Telco customer who trying to leverage Communicaiton Suite Address book functionality for hosted corporate address book. In their requirements there is a need to extend Web Mail client for several windows, add new entry forms and add field validation. From what we ...

Is there a command that displays message store usage by partition? Specifically, the current space used and the number of users per partition? This would be extremely helpful for balancing the number of users between partitions for backup purposes.Our imsimta version info:Sun Java(tm) System ...

Hi,I am trying to set up housekeeping scripts to tidy up my system but the msuserpurge tool is seg faulting when I try and run it:/opt/SUNWmsgsr/lib/msuserpurge -d domain.com -v -g 90Grace period: 90 daysPurge users deleted before: ...

use whick command to list the all user mail quota ;use whick command to set all user mail quota ,thanks for you !

my system is 5.2 ,and have many use is the specify 15M about the mail user quota,now i want to change them to the default user quota,by the web delegated i can change them one by one , i want to know if i can use command to change them,thanks for you !

Good Aftenoon,First of all let me point out that I am new to the Messaging Server System. My boss has asked me a queston that let me wondering if it can be done. There was a mail sent to a distribution list that we would like to be erased from every user account that it arrived. How can this be ...

Hi,We have two mail servers in our org. one is JES messaging server(corporate mail server), another one is exchange server(internal - for some applications to use).Our situation is we would like to forward emails of one account from sql@myorg.com to sql@ex.myorg.com Below is the error:Your ...

Hi all,I would like to know a method to read emails directly from mail store. The reason is that my boss asked me to scan the emails to find whether or not our employees' emails include the sensitive and illegal information. I am sure there is way to monitor users' email, but I am new guy to ...

Hi,I am using Sun Messaging Server 6.2. When i am trying to send an email to a dynamic mailing list, i get a delivery failure mail:===============Your message cannot be delivered to the following recipients :Recipient address : all_test_users@test.domainOriginal address : ...