Dear Sir,After I installed and configured srss 3.1 in sparc Ulatra45 with Solaris 10, and powered onSunRay2, the connection was hanged on OSD 14D, and log-on screen never showed.After I checked /var/opt/SUNWut/log/messages, I found the following error messages were repeated with the number of ...

Dear Sir,If I want to use a usb device on Sunray 2 (the usb device is plugged into Sunray's usb port), and I have been developed a usb driver on Solaris 10. Can I install the same driver in SRSS host to active the usb device in Sunray? If it can, how do I configure SRSS and where is the ...

Hi,I have installed srss 3.1 on my E3500 running Solaris 9 latest recommended patch cluster and using a SunRay 1 and a Type 6 USB keyboard I can't use most of the key pad keys.rskelton: xmodmap -pmxmodmap: up to 2 keys per modifier, (keycodes in parentheses):shiftShift_L (0xe8), Shift_R ...

I am trying to implement this little rascal but to no avail. I want to use a file-based repository. So successful installation, then create repository - no problems. Then I had some problems figuring out how to add users to the Domain tree but that's done too. I did some profile tuning but now ...

We're having a problem with sessions terminating soon after a user removes their card from the Sun Ray. The approximate time is 15 minutes currently, so we have users running to other buildings once they remove their card so they don't lose their session.Sun Ray 1;Sun Ray Server 1.3, soon to ...

I have a Sunray 2 client, Sunray server software 4.I'm using the sunray conector (RDP Client) to connect to a windows 2000 server.The serial port mapping is not working when I connect to windows 2000 but if I connect to windows 2003 the serial port mapping work fine.Any ...

Is there a way to make Desktop Manager work with CAM? I have two different user modes set up in SDM and I want both of them to log in automatically without requiring username and password. Is there a way to do it with CAM? Or if there is any other way to make the thin clients autologin I would ...

Hello,Will the failover in SunRay Manager be transparent. Will the user be forced out of the system if the server goes down.Thanksunicsguru

just some theoretical question...would it be possible to put a sun-ray session into a solaris container, stop it, move it to some other machine, and restart it there?never played with containers and maybe i am compleatly wrong here...

I'm succesfully using smart cards to log on to Windows 2003. But the problem is that it's very slow!If i enter a wrong pin code, its fairly quick to respond with an error but when entering the right one it takes like 13-15 seconds to log on. The smart card slot on Sun Ray 2 is flashing all ...

Hi there,I have a little problem with apocd startup, i've already set up the configuration agent following documentation on docs.sun.com but when i try to start up apocd daemon "/usr/lib/apoc/apocd start" I get this error (that's the output of apocd.log.0 in /var/opa/apoc/Logs, loglevel ...

I have installed SRSS 3.1.1 on RHEL 4AS following the Sun documentation. Everything seems to be working well except for USB memory sticks. I can insert one into the SunRay 170, but nothing happens. utdiskadm -l shows no mounts and $UTDEVROOT/mnt has nothing either. Does anyone have a step by ...

This has always happened. Printers never get recognized

any idea how ?

I have this odd problem:I have a pilot project consisting of handful of Sunray 1g, 2, 270 and 2fs DTU's connected to a pair of T2000's running SRSS 3.1 w/ 120879-05.The problem that we are seeing is that when the Sunray 2's are using the new Type 7 keyboard/mouse kit and they go to sleep for ...

Haven't managed to locate a SunRay config file that can tell me the following:How long after removing your smartcard, do you have to go to another location before SunRay shutsdown your session?

Hi forum users,Where can i download or find the "xv" application ?Thanks.# Yours Sincerely,# Mohamed Ali Bin Abdullah.Anthony Worrall wrote:> In chapter 10 "Control Access Mode" of the "Sun Ray Server Software 3.1> Administrator's Guide for the Solaris Operating System"> ...

I have the following (potential) solution.Sunray, Available 'box' at home |NAT/Router |Internet |Public Access Server |Sunray ServerI have full control over the sunray, the available 'box' (on which I will install *nix or whatever is required), and the Router. I have user privileges on the ...

Hi all,I've managed to install Secure Global Desktop and also the Sun Ray server software on my Solaris 10 6/06 (on a SunFire X2200).Now the Sun Ray is able to detect via my office network that a Sun Ray server is alive and it connects to my SunFire box without any configuration needed ...

Got a simple question about replication.We've got two Sunray servers in a failover group. Both are Solaris 10 x86, running SRS4.When I do a "utresadm -o" on each of the servers, I get different results. Shouldn't these resolution definitions get replicated identically to each server?Or do I ...

Hey you all..I have 6 Sun Ray 150 terminals and a Sunray server. I want to have one master terminal and 5 slaves where the screen images from the master is cloned to alle the slaves so if at move the mouse on the master it also moves on the slaves ect.Is it possible and HOW?Standard multihead ...

Has anyone been able to get one to work? From what I've found so far, it appears that it's possible with serial Palms, but maybe not with USB?

Hi!I have search in several forums but It's not clear for me if ti's possilbe have sunray sessions in zones containers.Release Notes says that SRSS only works on global zones, but I read an article that recommends "run" sunray sessions on differents containers. If an application from a user ...

My sunray dtu's won't bring up a log in page. They come up and get an address that is being dhcp'd by the sunray server, connect to the server, show the paddalock, then go to the hourglass and sit there. I have tried issuing cold restarts and i get this on the console afterwards:Jan 25 ...

Hi,Like many other in here I'm new with sunray.I've installed srss 3.1.1 to vmware server that has rhel 403 64-bit system.ut install is done correctly and utconfig went well after i made some lib links.The DHCP is working well, tested it with a nother sunray server.Now when I set up 2FS to ...

When I enable security on the sunray server via the administrators console my dtu's will no longer connect. They sit at 26D. When I disable security they will connect again. Any ideas?

Hi everybody...We have a farm of 6 Sun Ray Server 200 Sun Ray clientsV20z Solaris 10x86 6/06 five of themV20z Solaris 10x86 11/06 one of them (just to check have last patches and updates)Suddenly clients connected to one Sun Ray Server hangs. The server answer pings but don't let login or if ...

So I'm fairly certain this is isn't supported, but is it possible (hackish or otherwise) to change the appearance of the NSCM dtlogin box, similar to how a regular dtlogin can be customized? Or at the very least, is it possible to change the logo that shows up on the right side?

Hi, I'm newbie with sun and I have adquired a sunfireT1000 and sunray 270 but I don't know how to connect all of this to run solaris... can anybody of you help me? thanks!

I'm having a problem where I can only get my SunRays to work if they were physically powered up when the server boots. If I have one unplugged while the server is booting, it will just hang on the "26b" screen until I reboot the server again!Tends to be a problem since if someone's in the ...

Can anyone point me to some documentation that shows how to switch a SunRay2 unit between a Solaris 10 x86 SunRay server and a Linux SunRay server depending on who's java card is inserted? Thanks

Is it possible to have both users and CAM mode all with or without smart cards? i.e. Without any smart cards, I want to have some Rays specified to be kiosks and others to be user log in terminals, and all Rays should connect to the same server. I know I can do one or the other, or I can do ...

I initially setup and configured SRS for CLI only. However, I wanted to do some experimentation with CAM, and all the documentation says to use the web interface.So, I did the utconfig thing and setup the web interface (without CAM, because I didn't want to break anything, figured I'd do that ...

Hello allI currently try to attach a ps2 keyboard (via usb2ps2-adapter) to a sun ray terminal. But there are a lot of dead keys such as less/greater, the dollar sign etc. When I try to load a custom keymap via xmodmap it brings always:/usr/openwin/bin/xmodmap: ...

Hi,is Sun Ray Server supported also for SuSE Linux Enterprise Server 10 ? SLES 9 is not more available :(Thank you,Julius Chrobak

Right now, whenever I pull my smartcard out and reinsert it, I have to enter my password. While that's a fine default behaviour, I'm doing a lot of swapping cards to test multi-user software as the different users. I'm rapidly growing weary of hitting the spacebar, waiting 10 seconds for the ...

I've got a Sunray 100 conected to a server, it shows me the log in screen, but when i try to log in with CDE, it tries to load the graphic interfase, but it takes me back to the log in screen. (the username i'm using is a valid one, and it isn't the root)

Hello,I just came by a used (surplus) Sun Ray 100. I've done a little research, but still have a few questions:1) Is there any open-source alternative to the Sun Ray Server Software?2) Is there any way to run SSH/X-Windows on the Sun Ray 100?3) When I power up the machine, I just get an error ...

I have successfully installed the sun ray software on a suse 9 box( st least there were no errors anyways). I did a utconfig with no issues, and then a utadm with no issues. I am using the internal dhcp that gets set up when you run utadm. I plug in a sunray to the interface that was set up for ...

My english is not good, but i have a problem with this versi髇 runnin onCentOS 4.4, i follow the steps of the guide of Sun to install the server, but the DTU only shows a 26D in OSD, with his IP assigned and the Ip of server but does not start the Graphics.

Hi all,we have installed sunray 3.1 server on sunfire v215 and configured it . DTU's are sunray client 270. I am not able to get a Desktop or logon page.They come up and get an address that is being dhcp'd by the sunray server, connect to the server. When i insert my smartcard i get a ...

hi,i am trying to do documetation for jsp pages, but i not successed.can someone clear this up for me? thanks!

Hiis there SW available for SunRay so that a touch screen could be connected to the SunRay Client? The touch Screen uses USB as an comm channel.

Hi,Is it possible to disable the control alt backspace backspace key sequence?Students keep using this to logoff.Thanks,Brian.

Hi,With NSCM, the current session will hibernate (sleep) after a period of time & present a login screen on the Sun Ray. Is it possible to prevent this from happening or alternatively, automatically logoff the session after some predefined time of no ...

I'm installing a SUNRay server, ESX 3.0.1, and the VDA kit, and I'm not connecting to the Web URL for the SDK at https://localhost/sdk with the VDA service on the Virtual Center server... I keep getting "Cannot Connect to the VI provider" error.Anyone else tried this? and have any ...

Hi..I'm facing a problem with the code 26D.Check at /var/adm/messages, the error showed Upsi-sunray dtlogin [ID 419506 user error ] utinfo: open socket:server Upsi-sunray unreachable.I tought it becoz of IP conflict but the code itself shows waiting for GNC state and all IP parameters are ...

Hi,I hope I have the right forum, I am new to the SDN. ( Please feel free to point me in the right direction if need be :-) )The company I work for runs a small Sun Ray/Windows setup. They use Sun Ray's as a thin client displaying Windows terminal services as the desktop.We also have a remote ...

I have recently installed APOC and the Sun Desktop manager. Both appear to be running OK but seem to have no effect upon login. I see the following errors in my log file:An error occurred while running the desktop applications 'launchers' plugin: Database errorAn error occurred while running ...

Hi,I have been trying to set up SRSS 3.1.1 on 64bit linux (debian, amd64).With SRSS installed in a mixed mode setup with 64bit system but 32bit libraries available, I ended having problems with the 32bit pam modules included with srss.With SRSS installed in a 32bit chroot environment I ended up ...